Search results

Looking for the depth stop parts associated with a power feed for the WT 1100 (20”) drill press. See picture below – parts in RED in the center of the picture. I’m interested in some or all of the parts shown. PM me if you have something you would like to move along. Thanks Rick

Title says it all - need the feed rate badge for a WT 20" power down feed side cover Thanks Rick

Looking for a head casting for a Walker Turner 1100 (20" drill press). Early version that will accommodate a power down feed. Let me know if you have something that you would like to move along. Rick

HOUSING COVER HAS BEEN FOUND I knew when I bought this machine that it was missing the side housing cover for the power feed. The 1946 parts lists has it as a HD-126 - the machine itself is from 1940. I circled the part on the attached schematic - right side mid page. Best case I find...

Good afternoon - I got this Palmgren tilting vise with the purchase of a 20" WT drill press. It is HEAVY - maybe 75#. Jaws are 6-1/2" and it is 16" long - not counting the end of the screw. You can see it is rough shape. I'm not interested in keeping it. I'm looking to get some information...

DRILL PRESS IS SOLD Up for sale is a recently completed Delta DP-220 14” bench top drill press. Serial number is 55-4813 which dates it as 1947. It is a DP-220 head with high speed pulleys on both the motor and spindle. Measured speeds are 4980, 2444, 1258 and 650. Motor pulley has small chip...

So I started this project - WT 20" drill press rebuild. Here's the pile of parts I am starting with Right now I'm struggling with the motor mounting plate - I want to get the studs out. Its kind of an unusual arrangement - there are locking set screws in each stud but not in the place where...

I ended up with a DP 220 Delta drill press head (serial # 17-9362 year 1942) with a broken spindle pulley, no motor (I robbed it for another press), no depth stop and it didn’t fit the column I had. So a decision has been made to part it out. All prices are before shipping - most of the items...

MULTI SPEED HAS BEEN SOLD This somewhat rare Delta attachment will increase the available speeds on your DP220 14” drill press from 4 to 12. I removed it from a 1942 vintage Delta 14” drill press. It will fit most machines with a 2-3/4” column. The machine it was removed from had the high speed...

I recently sold a foot feed for a Walker Turner 14” drill press. Somehow a small bag of hardware did not make it to the buyer. Not sure what happened but I’m trying to make this right. The critical pieces are the top and bottom swivels – part numbers 216-19 and 216-21. I’m still turning the...

I dug this out of a storage cabinet today. I got it years ago as a potential vacuum pump. It is marked John Bunn model 400-002. I can't fond any specs on it. I would like to find out if it is actually a vacuum pump and what level of vacuum it can pull. Rick

ALL SEARS COMPANION PARTS SPOKEN FOR These parts came from a Sears Companion (Atlas manufactured) drill press refurb. The parts came with the machine and I believe they are all from the Sears Companion press. The front belt cover hood is from a Dunlap machine (Dunlap badge included) of the...

I recently picked up a Powermatic 24” scroll saw so these machines are now surplus and need to go. The first one is Type 1 with a Dewalt Stand. Not an expert but seems to run fine to me. All parts are present and accounted for. I went through this machine following the 4 part YouTube series – I...

DRILL PRESS IS SOLD I am offering a Buffalo Forge 15” bench top drill press for sale. This is a newly refurbished machine. It was completely disassembled, cleaned, painted and reassembled. Where necessary period correct parts were obtained and included. The press has a tilt table, table lock...

I am offering a somewhat rare Walker Turner Foot Feed assembly. This came off of a 15” model 1200 machine. All components are present and accounted for except the upper gear guard and its commonly available hardware. This would be easy to ship with the exception of the long rod – I don’t believe...

PARTS ARE SOLD 1/28/24 - One more price reduction before it goes back on the shelf - $25 These are parts from a Jacobs 33B chuck that I recently disassembled. I have the 3 jaws, split ring and outside sleeve – all seem to be in good condition. I would prefer to sell as a lot and not split them...

I'm trying to get some information regarding a WT foot feed for a 1200 series 15" drill press. Specifically - are they a fairly rare item and what is the value range for them? I would typically go to Ebay sold items but I can't find any WT foot feeds listed. Thanks for any help/ideas you...

PART HAS BEEN FOUND I’m working on a Delta drill press that came to me with a botched up front belt guard. It is Delta part number DP-257. I have one that I could borropw from another 14” Delta but Id rather not. So I’m looking for a reasonable priced complete front guard with Delta head...

HANDLE IS SOLD This is a ball end handle that came from the table raiser assembly of a Delta 17” drill press but is likely used in many other applications. I believe the part number is ddl-160C. It is 4-1/2” long and has a ½” bore with a set screw. The small arm spins. Looking to get $25 plus...

I have a Cutler Hammer bulletin 9101 switch that needs a different heater. Looking for a Cutler Hammer H21 6.4 Amp heater. Needs to be the same configuration as the picture below. Thanks Rick