Search results

This power feed came to me with a Delta 17" drill press I believe this was introduced in the early 1940's and was replaced with a newer design in the late 1950's. This is driven from the motor - which is double shafted - and has a pulley on the lower shaft which is the power source for the...

I need the space so this project needs to move along. It is a Delta 24” scroll saw with a welded stand. It is a variable speed machine with all the parts for the variable speed, crankcase and standard plunger parts. Table and trunions are included as well. The motor is 1/3 HP, single phase, 110...

I have a vintage WT motor – 1 HP, single phase, dual voltage, 3450 RPM that is way to fast for the application I have (bench top drill [press). I would like to trade it for a similar motor – single phase, dual voltage, 1725 RPM motor, ¾ or 1 HP. 3 phase would also work. My motor is currently...

For sale is an Allen Bradley 509-BAD magnetic starter. BAD Does not indicate condition - it is the model with B indicating size, A I think is enclosure and D is voltage. This is a NEMA size 1 capable of both single and three phase usage. It currently has a 120volt coil and W43 heaters. It is...

MOTOR HAS BEEN SPOKEN FOR I have a Delta 3 phase, 1-1/2 HP. 3450RPM. Dual voltage motor (Model 87-121) motor that I would like to trade for a Delta/Rockwell 1 HP or ¾ HP, 3 phase, 1725 RPM. Dual voltage motor (model 86-720 or 86-920). New motor is destined for a 17” drill press. The 1-1/2 HP...

DRILL PRESS IS SOLD This is a recently completed rebuild – it is a Delta DP-600 17” floor model drill press from the early 1950’s. It came to me with a serial number of 105-1580 which puts it as a 1952 build. It has been completely disassembled, cleaned and painted. The drive system is a Wagner...

I have two Delta 40-440 24” scroll saws that need to a new home. I bought these to restore but I am overwhelmed with projects right now and am running out of space. These machines are both in the condition I bought them – no work has been done to them. They are both variable speed models and...

Looking for a head badge for a Delta DP-600 drill press. Picture below. Right now I need one but will eventually need 3. If you have anything you would like to move along – let me know. Thanks Rick

Give yourself a Christmas gift - this is a project for your 2025 pleasure. The machine was disassembled several years ago. Some parts were refinished and some were not. Something got in the way (can’t remember what) and it went on the back burner. I now have way too many projects and this is one...

I'm in the process of making a male tapered spindle to fit into a female taper socket. The female socket is a mild steel and the material I have for the male side is stainless steel. I don't know the actual grade of either material. Is there any risk of the two materials interacting is some...

Just wondering if there is a way to report a member who is a strongly suspected scammer Rick

OSS IS SOLD Machines run great – I replaced it with a more vintage machine. Includes all 6 spindles and matching table inserts, a variety of abrasive sleeves in several grits, a rolling stand with storage drawers and a shop vac for dust collection. Dust collection works very well. I’m asking...

I’m finishing up a rebuild of a State B4 OSS. I am looking for some spindles and throat plates - specifically I need Positiv-Lok spindles3/4 X 6, ½ X 6, 3/8 X 6 and 1/4 X 5 and the large throat plate Let me know if you have any of these you would like to move along Thanks Rick

I’m finishing up a rebuild of a State B4 OSS. I am looking for some parts but don’t have high expectations of finding them. I need 1. The lower collar for the Positiv-lok spindle rods 2. Rubber expanding drums 1”, 1-1/2” and 2” all 6”? long 3. Positiv-Lok spindles ½ X 6, 3/8 X 6 and1/4 X 5 Let...

I have an earlier version of this - it appears to have been bought by Ryobi but also appears to be discontinued. https://www.ryobitools.com/products/details/33287145935?srsltid=AfmBOopvD4FiRU5ZkrXBf1cdWnEeBswdjiGKREyo-yHRKITRjOzagmJg Is there anybody making a version of this tool? Thanks Rick

DRILL PRESS IS SOLD This is a recently completed rebuild – it is a Delta 17” floor model drill press from the early 1940’s. It came to me with no serial number plate and no indication that there had ever been one – so likely a pre-serial number build. It has been completely disassembled...

I'm looking to fill an arc of shame in a drill press table. Looking for a filler that can be sanded smooth and look like the machined cast iron table. I've used JB STEELSTIK in the past but it leaves obvious visual differences. Any suggestions? BTW I don't weld of braze. Thanks Rick

DRILL PRESS HAS BEEN SOLD This is a recently completed rebuild – it is a WT 20” floor model drill press from the early 1940’s. It has been completely disassembled, cleaned and painted. The drive system is a 3/4 HP 3 Phase 1140 RPM 230 volt motor. The motor is powered by a VFD that requires 220...

This WT drill [press head came to me with a broken pocket where the motor mount stud slides in. I have made a support bracket/strap that will span across the two holes on the back of the head. Now that I have a tentative plan for providing adequate support for the motor mount plate - I want to...

I am working on a Walker Turner 1100 drill press. The table has an arc of shame - no through holes - just divots. I would like to fill them - realizing I won't be able to make them disappear - but I would like to level them. I am thinking JB weld but thought I'd ask if there was some other...