Search results

I bought this Starrett 924 vise earlier this year at a swap meet. It didn't cost much, and I thought that I got a good deal. My intention was to clean it up and sell it. After I took it apart and cleaned it, I discovered that someone had ground some material off of the bottom of the slide. It...

Font Test Arial 18 • Item 1 • Item 2 • Item 3 • Item 4 Font Test Arial 7 Item 1 Item 2 Item 3 Item 4

Does anyone know who made these sockets? They are 1/2" drive, and are nickel plated. They have straight outside walls with a knurled band in the center. The openings are cold broached, with a turned relief below the hex. The overall height is 1-3/8". Sizes are 7/8", 15/16", 31/32", 1-1/16"...

I just got this 1/4" drive ratchet. It is obviously made by Herbrand (it is identical to the M-5) , but it is marked Bonney V-701-H. I knew that Herbrand made ratchets for Billings in the 1950's (Herbrand actually owned Billings for several years), but I did not know that they also made tools...

I have pdf versions of more than 40 vintage tool catalogs and other publications. If someone would like to put them online, I would be happy to send you the files. I have items from the following manufacturers: Billings & Spencer Bonney Crescent Diamond Yankee P&C Plomb Proto Utica Williams...

This is a 1/2" drive flex extension, 10-1/4" long. The flex joint only pivots in one direction, unlike a universal joint. I got this item with a group of Husky tools. It looks like a vintage Husky item, but the only marking is "CAT". Does anyone have any information about this tool?

This is a vintage key cutting machine. It is 10" long and 7" high, and it is marked: THE YALE & TOWNE MFG CO STAMFORD CONN, USA. The underside is stamped 2506. This machine can be either hand cranked, or belt driven. This machine has some scuffs and marks, but everything moves freely and it...

SOLD This is a group of 9 Matco 6-point sockets, on a Matco rail. BD126 3/8" Deep BD206 5/8" Deep B326 1" B306 15/16" (2 pieces) B286 7/8" B246 3/4" B206 5/8" B146 7/16" These are all in clean, excellent condition. Some look unused. Asking $24.00 shipped.

Can anyone identify this tool? It consists of two pieces, Proto item numbers 4080-B and 4080-S. When assembled, the tapered piece spreads the fingers on the slotted piece. There is a tapped hole in the end of the tapered piece, maybe to attach to a puller?

SOLD This is a nice York bullet-style swivel base vise. The jaws are 5" (125mm) wide, and it sits 7-1/2" high. Fully open it measures 4-3/4" between the jaws, and it weighs 40 pounds. The body is marked YORK on one side, and 125 on the other. This vise was completely disassembled and cleaned...

This is a brand new 6-piece set of Snap-On extensions, still sealed in the package. These are 3/8" drive, the lengths are 1-1/2", 3", 4", 6" 8", and 11". I'm asking $99 shipped. Please post here first, then send me a PM.

SOLD This is a group of 24 flex type sockets. Condition ranges from fair to like new. I am asking $36.00 for them, shipped. If nobody takes the whole lot, I will take $3.00 each plus shipping. 1/2" Drive: T-18 9/16" Williams 1/2", 9/16", 5/8", 3/4" 3/8" Drive: 3/8" Thorsen, Giller 7/16"...

This is a group of Craftsman tools, 51 pieces total. They are all new in the original packaging. Included are: Arc Joint Pliers 20 Screwdrivers 2 Files 2 Adjustable Wrenches 8" 2 Torx Drivers Nut Driver 2 Open End Wrenches 3 Ratcheting Box End Wrenches 11 Combination Wrenches 3 Box End Wrenches...

This is a group of used 3/4" drive sockets and a 4" extension. Front: 1-1/8" Williams 1-1/8" Proto 1-1/16" Proto 1" Proto 15/16" Proto (has grind marks) 7/8" SK Rear (All imports, including the extension): 1-1/4" Impact 1-1/4" 1-3/16" 1-1/8" 1-1/16" 1" (2 pieces) 15/16" 3/4" These all show...

This is new Victor Powder Spray Torch Setup. It is used for building up worn surfaces or applying a hard, wear-resistant coating. Included are a Victor 100C oxy-acetylene torch body, JS-100 spray unit, 3-TE tip, #600 wear prevention powder, #22 buildup powder, and instructions. The 100C body...

Here is a large assortment of Billings & Spencer wrenches. There are a wide assortment of sizes, styles, and markings in this group. The first two pictures are all bicycle wrenches. These are $6.00 each or $5.00 each if you buy five or more. Take all 25 for $100. The second two pictures show...

This is a nice group of Craftsman 1/4" drive items. Quick-Release ratchet, brand new in original package Breaker Bar 3" Extension 6" Extension 4" Flex Extension Sliding T-handle 6-point Deep Sockets, 5-6-7-8-9-10-11-12-13mm, brand new in original package 6-point Shallow Sockets...

This is a set of Cornwell 1/4" drive deep 6-point sockets and two extensions on a rail. Sockets are 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16". The extensions are 2" and 6" long. These are in nice condition. The Cornwell price for these is $171.94. My price is $40.00...

Here is a group of assorted S-K wrenches. I'm asking $32.00 shipped. I will consider trades or offers. These are all marked S-K, except as noted 12" Adjustable, has scuff or grind mark on the back side of the head C-28 Combination, 7/8" C-26 Combination, 13/16" C-22 Combination...

I went to the Swap Meet at Belmont Race Track this morning. This is what I came home with. The first picture is all Craftsman, the second is all S-K. The third picture is mainly US made items, with a few from Germany. The last picture is a bucket full of imported junk. Altogether, I spent $118...