Search results

Hi, Picked this up for $25 on FBM an hour away. Seems the Cent. Brake is missing, Motor runs fine and even tested under load. Is an Emerson Electric, Model C4BYZFT-241 1.5 HP Tearing this down will replace oldbearings and cleam motor and make a cover for the end of the Motor where...

Hi, Well, wired in the switch, and put on a belt, and she is pretty much done. Still have to sharpen the knives, and set/tune, for actual cutting. Quite the difference from when I brought it home!!!

Hi, In the process of rebuilding my 1960's Toolkraft 6X48 Sander. It will have a 1 HP Motor!

Hi, My experience, but most small pulleys are bored 1/2" or 5/8" ... This shaft on the cutterhead was 9/16", and I could not get it to run straight, no matter what, so... Rebushed it and made it a tight slip fit to the shaft and now runs pretty true, from what I see... Will have to...

Hi, Coming together!

Hi, Well, getting a little done today... Still waiting on the correct bolts, for the Fence, to go with the Angle Head. A few other things in the mail, I need, but the Jointer, does look better minus the rust! See if I can paint, the Motor today...

Hi, Has anyone gathered their own parts and made a 4 track, 4 door, sliding screen door for a 2 car garage??? Trying to build something nice without breaking the bank, also must be able to still park car inside. Any suggestions appreciated!

Hi, Set Screws made and a pic of where they live... These are set to bear against a swing out stop plate, that will set 3 pre set angles on the Jointer Fence... This is so you don't have to manually set angles each time you need a different angle. The way to get the slot to cut clean...

Hi, Received the1/4X32 Die and Tap, to make the needed set/adjust screws for setting the angles on the Jointer Fence... Why Delta used the more rare 32 TPI than the common 28, I have ZERO idea, but here we are! Not long ago, I made a Lathe Tailstock Die Holder. It holds 1" dia. Dies...

Hi, Bearings have arrived! These are NOMA Japanese made Bearings with the extended inner race as the originals. These People at NOMA actually called me, after my Internet Order, to make sure they were sending what I wanted!!! https://nomabearing.com/

Hi, Decided to work on the Cutter Head today... It was rust pitted and so bad would not remove with just sanding, so... Chucked it in the Lathe and took some skim cuts. Ended up removing .010, which is not to bad and then finish with some 120 Wet Dry, for a mat finish. Better I think!

Hi, It's not work if you enjoy it! There's also satisfaction in saving a nice Machine from the Scrape Pile... I don't think I could of got those rusted in Set Screws on the Fence without my BP Mill... Had to "drill" a hole in them with carbide tooling to get an easy out to work, then...

Hi, And the tear down continues... Had to heat the blind cap with a hand held torch to get it free... The Seller said the Jointer had never been outside, but I have my doubts. from what I am seeing!

Hi, My Craftsman Emerson 10" TS, used a woodruff Key on the Arbor Pully!

Hi, Very nice!!!

Hi, Had to scrap the Motor, but I tried anyway. Have another Craftsman 1/2 HP Motor I can use. What Table???

Hi, Working on the Rockwell 37-290 4" Jointer, a LOT of rust! The Set Screws are 1/4X32, for some reason. Found out cheapest way to get new ones is make them myself!

Hi, Love that Craftsman Base! Keeping my eyes open for a deal on a CM 113 Jointer with that same Base! Might put up a Want Ad, and see if you can find a T2, you will be amazed how it transforms that Saw!!! I also have a BOSCH Router Table, love it!

Hi, Have found my self attracted to these Machines, especially the Vintage Models. Have a Delta Rockwell 6" that I rebuilt with a 1 HP Motor... Just picked up Rockwell Badged 37-290 4" Model. This seems to have also been built under the Delta "Homecraft", Brand... Neat little Jointer...

Hi, There are some used Fences on the Bay for about $150, which is what I paid new years ago. Everything has gone thru the roof lately, and used would be an option if I was looking now. The OEM Fence on my Saw was outright useless and went to the Dump!