Search results

Hi, The Delta T2 or even one like it,(Vega, Incra, Grizzly, Shop Fox) will completely transform this Saw!!!

Hi, Well just picked it up and the Gentleman selling it was from England! The 2 slicer I bought had belonged to his Mother and she passed. He had a 4 slicer already so did not need it. Said it was 2 years old and it looks brand new not a scratch on it! Thanks for the feed back!

Hi, Looking at one of these from FB Market for $40... ($300 new?) Looks brand new and is the "Classic 2 Slot Model... Parts are available if needed and is made to be repairable it seems... Anyone have one? Thoughts?

Hi, Well the Mind is a dangerous thing... Ordered a Linked Belt, after going through my stash of old Motor/Fan Belts... Then realized I had a Linked Belt on my Delta 15" Drill Press and pulled and used that. Will put the new belt on the DP when it arrives. Finished putting the Saw...

Hi, Well, got the Bearing in, pretty easy really, just tapped in, no problems. Pulled the Base off so I can play with the Trunnion. It had a small skip or jump, in the Height Adjust function, turned out to be just a loose bolt that holds the Arbor Housing. Painted the round handles as...

Hi, Well, new bearings will be here tomorrow... Painted the Base and underside of Table, more for rust protection than looks. Florida's, Heat, and Humidity, takes no Prisoners! Made an Adapter Plate, because the cheap Motor I bought has a different foot print, and... Did not want to...

Hi, Thanks Gentlemen, I'm also going to try out a cheap 2HP Motor and see if that gets me close to what I really wanted which was a Delta Unisaw... (they were too expensive for my needs) If the 2HP Motor works with the Delta T2 Fence, I should be as close as I can get and really all I...

Hi, Thanks, that is not my saw, as I said for "reference", sorry... My Saw is a 113.27520, which seems to have been considered one of Emerson's best Saws. It has worked great for me for the past 20 years and the only reason I am tearing it down is the Blade would "ting" as it slowed...

Hi, I bought one of these years ago and am slowly doing some improvements... Really wanted a Delta Unisaw but Owners around me want to much for them. Found a 113 with a stout wooden stand and bought it. Put on a Delta T2 Fence and it has been a pleasure to use, but... Fixing to...

Hi, Thanks, went to see it and did not get it. It was pretty light on the Cast iron and not to my liking.

Hi, Picking up one of these today and see that the Bearings are not available but others may work with a retaining compound. Anyone have any info on the Bearings in these Cutter Heads???

Hi, They are VERY stout little Drill Presses! Had to weld mine up and fly cut the tables... Also had to get on the Lathe and make a new bushing to put a new Timken Bearing in! Interesting fun project! Oh yea, the Bearing in the 11" is the same in the 15", rebuilt one of those also...

Hi, Nice work!!! https://www.garagejournal.com/forum/threads/shop-made-wooden-machinist-chests.545294/#post-11141336

Hi, Thanks for the info and pics!!! Wanted to make sure, I was not missing anything!

Hi, Going to make a Box Joint Jig, the back board will be adjustable to get the Pin tightness correct but the question is... How do you correct or center the Pins to be equal top and bottom on the finished board? I see it as either changing the dia. of the cutter or the width of the...

Hi, No, pretty easy... If you do not have a vise or puller just cut off the old bearing and then get a piece of pipe that matches the INSIDE Race and pap it on, it will go on easy. Not the right size pipe available? Drill a hole in a block of wood or steel just bigger than the shaft...

Hi, Wow, nobody threads Pipe on this Forum??? I thought this old Tool would get SOME Feedback? Just bought a Vulcan No. 1 Pipe Vise to go with the Threader...

Hi, Does anyone have any info on the NYE Triad N0. 50 Ratchet Pipe Threader? A parts/instruction manual would be nice? The few Dies I have are 1.5" Dia. and I assume they will fit a No. 50 Tool?

Hi, Well got the new belt on, and turned a Knob, for a simple Pull, for the Motor. A lot easier to find and operate. The Chuck Key, is held by a small Magnet, and works great. As stated, this little Drill Press, is right up there with the Big Boys, from what I see!

Hi, Saw this a one Burner model like my two Burner. I do like the flame from the Burner, looks efficient!