Search results

cool, thanks guys. I was hoping someone had a storage system like what is used for cordless tool and made from PVC

I have several DeWalt and Black and Decker corded tools that are gently set in the bottom of a tool box. They look unorganized and usually have to pull several tools off of another to get what I need. Please show me examples of how your tools are hung/stored. Thanks Art

^^^ right! every year since 2003, the Air Force Fire school didn’t in 96.

LT1 engines were gen 2, available with AL heads and cast iron on a more limited basis ( cop cars ), dry intake with injectors pointing on the intake valve, distributor and water pump driven by the front of the cam and a plug in the back to drive the oil pump off the cam drive gear, sequential...

Looks at the coolers Earl’s Performance makes

one of the lithium jump boxes? you can keep it charged through a cigarette lighter

try an impact screw driver?

sounds like it’s time for a tune up, change oil, clean filters, new belt and drain the tank

your local fire department should have no problem ( call ahead ) coming out and measuring any CO levels if you have a legitimate concern. The use of a four gas detector and pulse ox are just part of the tools almost any engine should carry

new tech cam out and discovered the dip switches weren’t set correctly, the fan wasn’t set to remove enough heat causing the unit to shut down

It did it again, outside unit wasn’t running but the thermostat( came with system) showed stages 1 & 2 running but the heat strip was off this time. Inside unit was just blowing air around. Company is going to send a diff tech this time

Danski, I bought a package and paid to have it installed, I understand what/why you are saying this.... but the installer should have set things up right and resetting breakers is bull. The reason I purchased a package is so I could go to work and not have to worry about the heat pump not running

watch the Hunger Games and adopt for a cat, film then pay per view

I’ve had a 60 gallon GE geospring for atleast 4 years. The biggest issue is the clean the filter buzzer goes off every 48-72 hours. In the cooler months (I live in NW Florida) my wife keeps it on hybrid since she and my daughter bath congruently. I’ve been overall happy about the purchase since...

cool, but I’m not happy with the situation. Buy a new heat pump and reset the breakers if the heat doesn’t work

everything was replaced, the outdoor and indoor units are approximately 25 feet apart electric only

After many years of faithfull service the 1995 Janitrol heat pump failed. In Sept of 2018, I had a 3ton 16 seer Amana two stage heat pump installed. Everything was great till the temp went to 48 and the system shut down the heat pump two stages were shut off and was running aux heat. I called...

heat pumps are very efficient ...

not all foam board acts as a vapor barrier, I was researching this the other day, as some are permeable

I would separate the tank from the compressor, mount the tank vertically to a pair of horizontal braces bolted to the tank’s floor mounts. I wouldn’t do this unless the horizontal supports are covering several studs that are braced well. Then find a shelf to put the pump/motor under or mount to...