Search results

Do yourself a favor if you just need to do one car take your old struts and new struts,new bearing caps etc. and just take it to a tire store or mechanic and have them switch it out for you not worth the risk should only cost 1/2 hr. labor have done suspension work for 30yrs. real easy to get...

When I did my garage a little over a year ago I moved my service and meter and all the other electric work involved just had to get a permit for the work I was doing atlantic electric came out to see what I was going to do and make sure the location was o.k. did the work the inspector signed...

What part of jersey homedepot in south jersey carries unfaced

Google the installation manual for the hot dawg 45,000 it has different spec's.I have a 4/12 roof and the nearest taller roof is 14' away and the peak is 12' away I installed mine with a 2' height and it works fine.If I ever go to sell it and an inspector say's something about it I can just...

Sorry I was busy at work if you pm me I can email you the service manual and my phone# I can probaly save you time plus money on your parts=cost + shipping Dave

Alot of inspectors want you to use the magnetic tape that you bury above underground utilities so it can be found with a locator,also if it's not marked and your digging you hit the tape first which is marked with the proper utility elecrtic pipe,gas pipe,water pipe etc.

Yep red angry and aggressive that why the military did away with red lighting and backlighting for screens in war rooms years ago.

If your floors not that bad just use the stones on a floor grinder and cup stone on angle grinder for edges don't waste your money on diamond stuff and if home depot can't supply one go to sunbelt.

If your floor isn't that bad just use the grinding stones alot cheaper than dyma-serts they come in 10,24 and 80 grit depending on how aggressive you want to get.When doing around the edges use a angle grinder with a cup wheel just wear some glove because if you slip and hit your hands or...

I alway's wear boots at work.At home I have alway's worn sneakers at home.One day while building my garage I stepped in the ditch for the drain tile and turned my ankle all the way up tearing the tendons so I learned the hard way it's just as easy to get hurt at home as work so don't skip the...

I put in the same unit 2 weeks ago works great can barely hear it running so much better then the propane convection heater I had.It's like I died and went to heaven:thumbup:

What's the ser# of the machine.With or without outriggers.What's the software rev.# off of the ecu.I can probably help you with some info.

Looking at your picture you have two double wall pipes inside,should be a single wall coming off heater to double wall thru your side wall,if not could you could be letting fumes in.

He has a real cool 66 tornado that he added anothe engine and transaxle assy. to the back that will smoke all 4 tires fast as all hell

Yea he has all the original file cabinets with the blue prints and built sheets etc. from the factory that's how his in house machinist repros everthing for the dueces

On a lot of commercial application the ground is up to keep items from shorting across the two prongs when stuff falls behind furniture and desks.

Hope that axle socket holds up.Could put the bed up and get it really tight!

Where you live there are several places.Try Gloucester county vo-tech or Gloucester county college in Sewell.County residents get a discount.If your looking for steel go to Fazzio's on Glassboro-Cross Keys Rd. & Pitman Downer Rd. They have all kinds of steel and just about everyting else tool...

2nd Plt. E 2/8 79-83 Gieger Tiger 0311 Ground Pounder BLT2/8 22nd MAU BLT2/8 32nd MAU

If you don't own one rent a 14" gas cut off saw and purchase a couple of disposable blades for asphalt what ever you don't use you can always return.For the cost of a concrete blade you would just ruin it.