Search results

Search the forum Search Articles
  1. E

    Less than ideal compressor wiring

    I dont see why it would not be the same in the US the motor is only rated for 15 amps so what would you need to use in the US then ?
  2. E

    Electric Requirements for a New Compressor

    All you need is a 40 amp breaker and run #8 wire this is not a true 5 HP you have and since you have a double 30 amp in there you can try it, it may work for you and if it trips it then go get a 40 amp
  3. E

    Less than ideal compressor wiring

    15 amps so it is a 3 HP motor you can use a plug on it fine I have that on my small compressor I run 12/2 with a 20 amp breaker and have a 20 amp twist lock outlet and plug it in
  4. E

    Trouble having getting Craftsman sockets replaced

    I might consider going to the store and buying the set and then returning it to them and tell them they already have the other broken ones there
  5. E

    Tools from the old world

    are all those wrenches 17mm ??? was there a sale on that size
  6. E

    Where can I buy this tool?

    I tried and the links all work tonight so must have been a glitch on the site. Its strange but the Canadian site has it even cheaper only 1.85 it must be plus shipping...
  7. E

    3/4" drive sockets not fitting common?

    I have some proto impact sockets that have a 5/8 drive and the 1/2 to 5/8 adapter for them they look like 3/4 if you look quick. They were my fathers and I remember them when I was still wet behind the ears
  8. E

    Where can I buy this tool?

    I tried going to the snap on link but it wont work or is that to just to get to the site ?
  9. E

    What do you wear(face) when sand blasting outside?

    I use a respirator with goggles and wrap a towel around my head but I only sand blast maybe once or twice a year
  10. E

    3/4" drive sockets not fitting common?

    are the sockets only 5/8 drive ? I have a few proto impacts that are like that
  11. E

    More vise paint ?s

    I would prime it to cover it good then if you want to have a better finish you can lightly sand it with 280-320 then 2 coats of paint should be good
  12. E

    Hein Werner O Boy

    I was wondering what everyones thoughts are for an O boy jack is worth buying and repairing ? He told me it looks rough but it works Its a 2.5 hour drive though
  13. E

    Jack oil question

    see the 4 screws in a row it is the single screw above them just unscrew it and add oil there
  14. E

    Sick air compressor

    could it simply be the gauge is not working properly
  15. E

    Sandblasting Question....

    what about using a wire wheel on it to clean it up
  16. E

    pole barn garage plans?

    The 12 foot walls will be enough to lift your car but if you have a van or SUV you may not be able to lift them the full height
  17. E

    How did i do for $50.00 Rockwell 15 drill press

    Great find I have been looking for a while for a floor drill press
  18. E

    Vintage Curtis Air Compressor-need info please

    I can guess the cfm is around 8-9 when it was new but that is a guess
  19. E

    air compressor and hose length - considerations

    Rubber hose will work fine for you Use 3/8 hose 1/4 will restrict your flow Yes you can use 100 feet of hose but if you are using a high consumption tool you may want to have a 1/2 hose for a long run Your air tank holds the air your compressor pumped into it so whatever the cfm is of the...
  20. E

    Replacement 2 Gal air compressor tank

    It would be about as cheap to buy a new unit than to find a tank that would work for you. Some rusty looking water is common, just keep it drained after you use it and it will work for a long time
Top Bottom