Search results

Nobody has mentioned the fastener issue with any hardboard. unless you predrill every hole you will get raised material around the fasteners. it will look terrible and not be able to be finished smoothly. Hardboard is great for work surfaces. Terrible for wall covering. Plus the nature of the...

I don't think its very expensive. this is the breakdown on my latest bill. I am south of rochester NY. basic surcharge is $17.00 just to have service. How does that compare to everyone else?

Yup. Trim around the entire top and just set it on the table. Now your edges are all protected and it won't move unless lifted.

2 options. 1: Heavy steel post like at the gas stations protecting the pumps. 2: Dig it deeper. Fill it with water. Then cover it with something that will float on the surface. I hate ppl that can't stay on the drive paths. And my driveway is not others personal turn around either. :) p.s...

I have accidentally ended up hooking the edge of the plastic back on sharp corners of sheet metal. It does make is smaller :) But the good thing about that is if you want to grind a tight radius you can shape the plastic to what you need.

This is the best I can do right now since everything is blocked at work. I guess it is called a sanding disk backer. http://thumbs2.ebaystatic.com/d/l225/m/m7fuaWc-UfbXKykpIT990Gg.jpg https://goo.gl/images/WwAFAE

I love flap disks but they just don't last and are pricey. I usually just use a soft pad. Can get them in 36, 80, and 120 grit. Cheaper and lost a lot longer. Also being flexible makes them more versatile. The best thing about flapdisks is once they wear out they make great buffing pads. Will...

The double drywall will definitely make a difference. It will also increase your fire rating for the area that is doubled.

All good welders are good grinders :)

Homasote between joists and drywall. Maybe try to find a way to soft mount the garage door opener.

does everything appear to be blue now? I like the idea of a colored floor but keep wondering if it will change the colors of stuff like wires enough to cause problems.

Have you got any pictures? I do alot of steel fabrication and am curious how bad it gets. You can PM me if you don't want to post them. Thanks

Sheet metal nibbler. or punch. or mill. The nibbler probably be the quickest unless you can find the right size punch and have a decent press. If you use a punch and have a proper size press you can actually have a tool made with dimpled edge to give it a real nice finish.

set up stops on the table to press the plate against. As long as you grind the correct direction that works beautifully.

Could always do poured concrete stem wall or masonry stem wall and move fill instead of adding fill.

For sure. I would offer to help but I am no concrete guy.

Looks like tines from a hay rake.

think you will need grease zerks on the tongue at all? Could make your life alot easier. Especially since PA is using salt now :(

I would love to get a copy of that.

Why does it always have to be the inside dual.