Search results

I completed the build on my shop in the spring of 2021. I have been using it for ~4.5 years. Long enough to consider installing a mezzanine. PROBLEM: I have in-floor radiant heat and DID NOT consider anchoring mezzanine posts when the heating tubes were installed. Therefore, I wanna just set the...

Can I find this on-line

I need to do some repair and paint touch up on my '70s-80's Accel Ignition Systems Display Cabinet Case. Anyone know the paint? or maybe a current yellow paint that is close? -- the touch up will be inside the cubby at the base. TIA

I recently purchased and have installed a Campbell-Hausfled compressor that is rated at 17.2 CFM at 90 PSI. https://www.northerntool.com/shop/tools/product_200431248_200431248 The blast cabinet I am considering says the gun assembly needs 25 CFM at 90 to 100 PSI...

Figuring out how to reduce photo size

I plan to place my air compressor in the loft of my garage. The loft is only 5' 11' from floor to ceiling. This limits my selection of a compressor to a very short vertical design or a horizontal one. There are far more vertical compressors than horizontal. So -- my question: can a vertical...

Milodon 2-Post Asymmetrical Lift -- Please Delete Looking for a 2-Post Asymmetrical Lift for my garage and came across shop that is downsizing. They are selling 9,000 lb Milodon 2-Post Asymmetrical Lift. https://cosprings.craigslist.org/tls/d/colorado-springs-misc-shop-and/7094386084.html It...

Looking for a 2-Post Asymmetrical Lift for my garage and came across a shop that is downsizing. They are selling their 9,000 lb Milodon 2-Post Asymmetrical Lift. https://cosprings.craigslist.org/tls/d/colorado-springs-misc-shop-and/7094386084.html It looks amazingly stout but I can find...

Sorry this is so long but I tried to provide a lot of inform in my initial posting. Bottom Line up Front: I am looking for a floor covering that will stand up to near-daily, moderate usage; is UV resistant; is highly reflective; looks amazing with a glossy, smooth shine; can be applied by me...

Some of you may be following my garage build thread on Garage Galley: Craig's Colorado Car Condo (https://www.garagejournal.com/forum/showthread.php?t=432775). I plan a loft above a dirty work room and a future bathroom. It'll be half way up the 14' tall walls. I have gone round and round in...

I have been wanting, planning, anticipating this garage build since 2007 when my ex-wife said "No garage in my backyard'. WARNING: This is gonna be a photo-intensive thread. The Plan See attached PDF file of PowerPoint sketch. Lot's of info on it. If it's too small to read, I'll copy/paste...

With regard to the multiple posts: 테크노카지노→ 784yes.com ←테크노카지노게임 I have not opened one and have interest in seeing happens if I do. Recommendation to all: ignore the posts and for the Admin to delete them all.

I just learned of these. I will build my garage this summer/fall and have held off on planning drains or trenches in the floor because I didn't know how to deal with the contaminated run-off. (I am on a septic system and have a well_ My garage will be 36' x 48' and I am now planning two...

(AKA: Vapor Honing, Wet Blasting or Liquid Honing) It essentially suspends the blast media in water making a slurry. It cleans, removes paint, etc just like a regular blast media in air – just gotta change to a different media depending on your work -- just like with air. The resulting finish...

I have no clue what features are required vs those that are just dressing. More importantly -- I have no idea what a good price is for a used helmet. For example: spotted this on CL -- is it a good deal? ESAB Sentinel Welding Helmet - $150 Text reads: I have a lightly used ESAB Sentinel...

I picked up a pair of Snap-On Tool Chests off Craig's List a while back. They both are in pretty good condition but one of them has a small but irritating flaw. The 3-Drawer Middle Chest (KRA429F) has one drawer (the top one if it matters) that does not stay closed. It functions just fine when...

Not Mine -- Not Mine -- Not Mine Found this ad on Craigs List for Springs Colorao: Includes all components for the CJ2001, CJ2002, CJ2003A, CJ2004, and CJ2005Puller Sets on VE200 Tool Control Board and KRA276D Locking Wall Storage Cabinet. Everything new in box unopened. He is asking $2,500...

Over the last several months I have acquired two storage systems for my screws, nuts, bolts, etc. I picked up two old labrary card files with a stand (see first photo below) And last month I scored a set of KAR cabinets (see photos 2 and 3 below0 Then, just today (08AUG13) I spotted this in...

Did this work?

Any one know / guess the make of this vise. Of course for $25, I guess I can't go wrong: http://cosprings.craigslist.org/tls/2071785245.html Craig