Search results

Re: Replacement Casters Andy: I have those exact same ones on a Lista cabinet that I converted into a tool box. About 5 years old and they seem fine. If your box is very heavy and you rarely move it, it gets a temporary flat spot, that seems to go away after you move it. Just be careful...

Great idea. Well done.:thumbup:

Well, if I had access to the Miata I would have measured it and not bothered anyone with the question. :wtf:

How much do you want to spend? http://www.globalindustrial.com/p/hvac/fans/blower/portable-ventilation-fan-8-inch-with-32-feet-flexible-ducting?infoParam.campaignId=T9F&gclid=COGA5eyAj88CFYFqfgodrMMJIQ Two of these, shove the ends over the exhaust pipe, and you're set. You'll still need to...

An experience like that will change your perspective on life. I wish you and your wife and all who go through the hell that is cancer, the best.

This is the way to go if you are powder coating misc. sized car parts. If it fails, they can't claim it wasn't prepped properly. I've gone this route a few times and it always seems to work out well.

Wow, three years later. Sounds just like I do projects!

Anyone that gives advice to not get building permits or inspections where they are required, is giving terrible advice. At some point the piper will have to be paid. I for one am very leery of buying property that has work done without permits. There are way too many people with more ambition...

Re: SNAFU - Situation Normal All F@#* Up - Part Deux Sorry to hear about your troubles. This ADA thing is something that can easily bite you in the tail. I am surprised they are asking for equivalent facilities. This is not required elsewhere, if you declare the upstairs bathroom to be "for...

You should follow the manufacturer's specs to the letter. That said, you probably didn't damage anything by going to 100 instead of 90. You should test them for torque periodically. As long as they can be torqued to spec, you should be ok.

What are the dimensions of your mezzanine (square feet)?

My experience in many respects was similar to yours. My concrete was in a bit better condition so I did not grind the floor. Cleaned it very well and used the etching degreaser that was supplied by Justin (that stuff worked great!). After two coats of the silver, there were still a fair...

Ahh, yes, I didn't think your door was that tall. Mine's 10 ft and if I give it a good push it'll fully open. And yes the rope is an entirely inelegant solution. I may have to follow your lead and get an H opener (they seem to be about $100 more than the J) when I do go ahead to buy it so I can...

The garage door I have is a balanced sectional door that runs vertically along the wall (In other words, you can open it and push it up to more or less any position and it stays at that position.) I suspect yours is also balanced, yours just runs horizontally along some of the travel. I have the...

Holy update, Batman. 4 years and 5 months later :shocking: :lol_hitti

Does anyone know if the 7000 fits between the tires of a 1990 Mazda Miata (first gen)? Thanks.

Wow, those cuts look perfect. Great job on the tile job. I guess there wasn't any other way to orient the lifts so that the four post doesn't interfere with the two post on approach? It almost looks like you need to drive in straight and then make a left to get onto the two post? Or is it an...

400 sq. ft/Gallon per coat = 57600 sq. inches/gallon per coat

GLP35 minimum clearance is about 5 inches, which means it wouldn't work for me, but good to know that the two hydraulic set up works. Can you post the video you looked at that made you think the Nussbaum looked shaky? I did see the video that Redwolf references.

Not sure how I feel about that.