Search results

or sanitation people if they see something arcing will keep spraying until it stops

3/4 mains 1/2 drops work great used this pdf on mine https://cached.tptools.com/Images/airline-piping-diagram.pdf

we do a ton of washdown and use caustic for cleaning .....aka food plant .....

wish i new that must of chucked doz of these lights converting over

can i ask why ? and for the most part there throwaway lights .... if going to led you need a good heatsink to keep the leds cool

woody we use them in the plant where i work all the time, that being said we do use them up to 120v and work flawless the plus we can do a hot swap when needed still have not tried 480 on them yet ..

just out of curiosity... what is you house pressure coming in ? are you regulated pressure whole house? true the shark bites are for quick fix only, but seen them only fail when the main line pressure goes sky high over night, seen day time pressurize @ 55 to 60 lb, at night seen it rise to...

power grease gun with lock in lube tip on flex hose then to load use a 5 gallon bucket and pump might even be able to use a lock and load tip for the fill ..

would never add dewalt for battery tools most are very under powered and battery platform is questionable to say the least ... For pro users Milwaukee would be the choice.. home owners /light users ryobi

I have a mid rise lift total different than a 2 post use it for oil and brake and detailing , you do have full access to the center of the car, and for detailing it rocks full access to the lower parts of the body without sitting on the floor... also it is the best work table ever out sitting on...

there is but it take forever to drain sump pump will drain it in 15 to 20 min when draining it a good time to purge all of you lines of grease and GOOP ....

have this one from the mid/ late 70,s i think ant can date better let me know. do want to repaint any have a color match close?

to me the Taiwan one's were the better wrenches.

will 2nd this the starting line gun are not bad. i would rather start with a new gun than a used older that may have problems, the older gun just adds more to the equation.....

your welcome just seen a mesage pop up avout the 3 in 1 and answered ...lol

congrats i ended up getting a gold 1720 shoptask barely used, withe the high lift for the mill head got done doing doing some mods on it and its running great, like a lot i just need to mill a key way or bushing ect ect nothing really high tech did finish adding the DRO on the mill a good place...

at work we just mount the foot to the side if needed or seen these also 145TC Frame TEFC C-Face No Base

A motor with the frame number 145TC tells you that the motor is on a 145T frame with C-face installed. The T stands for feet. So if you ordered a 145TC frame motor, you get feet and the C-face on a 145 frame. https://www.regalrexnord.com/quick-reference-motor-dimensions

and if you really used your shop /garage the epoxy will chip and peel. the only thing that holds up is polish the concrete or race deck style floor

like these https://www.amazon.com/dp/B0B2JHGLNX/?tag=atomicindus08-20