Search results

why female to female ?? go from post 13 should always run a regulator at the spray gun, then a male or female snap fitting perfaable full bore

and next week who knows ..... they were really bad on emery paper rolls, great ones this week next total garbage

i have power tapped in SS angle iron and tapped in cast iron with a impact gun never have a problem....... power tapping at app. 7:05...

no they make sockets for the square taps and reamers https://www.amazon.com/dp/B0002SRFOE/?tag=atomicindus08-20 or these https://www.amazon.com/dp/B000TGM7HY/?tag=atomicindus08-20

link no work ... need it bright enuf to see it across the room .... just added mine to one side of the disconnect switch been installed since 1-17-2007 and yes the motor needs to be re wired waiting on a pressure switch .......

not bright enuf ...

age, quality they just wear out in time... on a water well you change them every 5 to 10 years..

between champman and wadsworth wadsworth wins hands down there spline is strong Wadsworth Mini Ratchet https://www.specialized.net/wadsworth-super-deluxe-mini-ratchet-screwdriver-set-4-52-pc.html?msclkid=713dffd148941315cfdb9c225b20aae9

the red tubing is from a bed frame? I would assume import ? iis it seamed tubing ?? and what was the yellow steel from ?

rusted have a picture of the table top I'm making to go vertical ... have to find it the mods are to make it better, than even the high price saws ....... and even doing all of the mods it would still be less than high price garbage ........... mine cut straight right out of the box and no it...

nothing wrong with the harbor freight saw .... just put on a good blade and it cuts forever have mine over 15 years ........ and cut tons of steel and scrap steel. and YES IT CUTS STRAIGHT .........

wow looking at the jet it looks just like my older harbor freight casting and all different motor, https://www.harborfreight.com/power-tools/power-saws/band-saws-scroll-saws/horizontal-vertical-metal-cutting-bandsaw-93762.html

you can bulid a table like this

have the harbor freight red band saw great for cutting stock and going to bulid a table for use in vertical mode, seen some have made a speed reducer for the wood saws, also would a vfd drive work on a band saw ?

this might help how to read a new departure bearing https://www.ahrinternational.com/HYATT-BALL-BEARINGS_nomenclature.shtml

don't do the full 8 foot lamps ,tried them and they sag in the middle converted all of my 8 foot all 12 to4 foot bulbs did the same thing a lot better and no sag from the 8 foot led

or reg antifreeze the old timers did it that way ... the new one is beet juice.. aka rim guard its heaver than reg water and non corrosive.

tap magic for drilling and tapping , have used it also for cutting

used these they work great, Thinkbee Wireless Lights Switch Kit, No Wiring Mini Remote Switch, No WiFi Needed, Outdoor 1969ft Indoor 328ft Remote Control Lighting Fixture for Led Light, Ceiling Lights and Lamps, Waterproof https://www.amazon.com/gp/product/B0814R5PSX/?tag=atomicindus08-20

its the rising from the floor and have to go right now usc problem ....