Search results

The thermostat in the shop is 24v, I was going to try a 115v to 24v transformer to make that work.

So the 24v thermostat would not work without a contactor? The gas valve will not be changed from 115v so that should not be a issue? I have looked on the net and have found a limiter and fan delay switch combo that is used on the PA75ab but I have to find the schematic on how it is wired. My...

I have the 24v thermostat and wiring already mounted in side of the shop from the Old Reznor heater, The Modine I just picked up is I believe is setup for a 115v thermostat. So I am trying to see if by adding a 115v to 24v transformer to the 115v thermostat wires on the Modine.Would It would...

No it has a 115v gas valve on it. Robertshaw gas valve.

I have to change the heater in my shop, the reznor developed a crack in the heat exchanger and was very surprised when flame started coming out the front. I was able to get a Modine PA75AB Old for sure but for a $100. I can give it a go. So I cleaned it up and figured I would get it wired...

Wood Shapers are a great tool, from raised door panels to all kinds of moulding and window frames, handrails so many things can be made with them and the right cutters!

OK OK I will take some pics.

Thanks, I kept in touch with this guy for a while, he told me what he wanted for them. I wanted the bandsaw for resawing. the shaper will be the third I have.

I have been working on a guy that had a Jet 18" bandsaw and a grizzly 3hp shaper in his barn. I got the call a couple of days ago. Our last conversation was about working out the deal. He wanted to have a bandsaw but did not have 220v in his barn. So I had a old Delta Milwaukee 14" saw that I...

I have been looking at this one on CL, Looks big but looks can be deceiving. It is a Walworth

I used it today to tighten up the trailer hitch, pull all the wheels off my 2500hd and switch to summer tires. It has twice the nut that my old napa impact has, of course it is 22 years old so it has earned its keep. Yes I like it.

Looks like a substantial unit there, nicer than the one I got last fathers day from tractor supply.

:thumbup:I was in need of a new 1/2 impact gun because the old Napa gun was on its last legs. I was reading reviews on different guns and seemed the HF earthquake 1/2 had a lot of great reviews and very few bad so I thought I would give it a try. I found a coupon that brought the price from $99...

Update: Wiring!! Update: I had the disconnect installed and a new main panel installed and a socket with a new service wire outside the house. The power company is coming some day to replace the service to the pole. My electrician says that when it is all done I will have power to spare. All...

I changed my shop pump to 230 and it starts up quicker than 110. Of course I ran a new line for it also so that could have been a factor in it. Since the wire was over 50 years old that was running it.

Looks like a napa jack

Poulin chainsaws make great boat anchors! enough said!

There is a 2hp marathon motor on craigslist sorta near you now.

After you get the building cleaned out stop by your local lumber yard and ask about trusses, Of course if you want to put a lift in be sure to get butterfly trusses so you have more head room.

I bought a cnc router table recently, When the truck came I was at a job and I got the call from the wife! $$$###!!!@sso:tantrum2:!! I calmly said without the machine I have to hire another guy! She went Oh ok. I said the guy will need a check it's on the desk. I was glad I was not home...