Search results

I was talking to a friend of mine about how I am getting a grinder (thanks motodave) and will prep the new concrete floor with a dimond wheel for use with the Wolverine 100% soild epoxy. He asked why not use a floor buffer/sander with a rough disk (like 20 grit). I have read the best way is...

Does anyone have a hand held grinder and disk they want to rent? I need to rough up my floor (new concrete) for wolverine coating and do not want to buy a grinder just for this job. Thanks, Dan

I am not sure of what you mean my "overkill", but have you ever been to a track where you have to bring everything you need? When we go to the track for testing you have to consider how much money is invested in the car, people, track fees, hauler, etc.. If you have to sit around because you do...

The "old" boxes are used for testing, or pushed down to Nationwide, Truck, etc. teams. Sometimes they are sold. If you really want one, you can check out our used parts store (roush yates used parts), they can get their hands on most anything.

The 10th digit is a 4, so I can get 2004 part @ 296 mm diameter. Thanks.

I have a Toyota Sienna XLE and I am trying to find front rotors and pads for it. The build date is June 2003 (which makes it a 2004). I see a listing for a 275mm diameter for a 2003 and a 296mm diameter for a 2004. Anyone have a way to look up the proper size?

What is a scarifier, and can it be used to prep new concrete for epoxy?

Brian - Nice DTS dyno. How long have you had it?

Thanks for the info. I am not against a clear coat, I jsut do not want a thick shellac that will chip. The stuff that is on the tables is about 0.125" thick and chipped. If the DuraKryl 102 goes on thin it souds like the best stuff.

I got some used butcher block table tops that I am sanding down and want to use for bench tops. What have you guys been using on the tops to protect them. I want to seal them from fluids in general (brake clean, gasoline, oil,etc.). I am concerned about a thick clear coat chipping when I put...

How do I change my login / display name? Thanks, DK

edit x

edit x

I was at Lowe's today and got a box of 7 CFL bulbs for around $9.00. There is a $10.00 off coupon inside for a purchase over $50 at Lowe's. Coupon is good until 2/1/10

Those look line "line wrenches". Mostly used on AN fittings in tight spaces.

Look at a Bosch CPO, I just paid ~$200 for a new bosch whole house AE115.

Re: my 17x29 detail shop BIG "A" DETAILING queens ny No mater what you, me, etc. think, the only person you have to be concerned about is the state or county. You may have just bought a big engineering bill and a redo of the truss. The easiest thing to remember is NEVER cut a truss, unless...

what mini-split systems did you use?

I use SEM paints. They have some pretty tough paint, I use chip guard for bumpers and such stays on really good, but has a textured finish. They also have a really good self etching primer.

Do not use Chlorinated brake cleaner on titanium. It will etch the titanium and ruin it. Just a side note.