Search results

what are you using for paint?

edit x

edit x

Have you looked at Rotary lifts. I have had one for about 10 years and never had a issue.

It cost next to nothing compared to chrome.

Is there any place on the web to get repair manuals free? I am looking for a 2008 F-150 and a 2008 focus repair manual.

The seats are vinyl. I have tried the magic erasers, no luck. I will look at some of the cleaners you all mentioned. Thanks.

I am trying to clean the black mold / mildew spots off the seats on my boat so I can store it for the winter. I have tired a host of cleaners and the seats are really clean, except the small black spots of mildew. What do you guys use?

Why did they have blocks turned on the side and holes in other blocks in the first few pics near the base of the wall?

If you move your lower mount off the post and onto the concrete block, it will reduce the load on the base of the post. Make a new brakcet that mounts to the concrete blocks for the bottom hinge and leave your top hinge on the post where you have it.

Did you fill the post with concrete?

I use scothbrite pads and wd-40. It will polish up like new.

What did you do with your garage door?

I use black diamond, from northern tool, tractor supply, etc. They carry a fine grit and a more coarse. I use the fine grit in both my blasters, 7.99 a bag.

The container should become a faraday cage, and you should be ok inside the container. The eletricity will "flow" around the outside. Do some more investigation in faraday cages to confirm.

I spoke with ATI - black diamond on the phone and they indicated I should be using a 1/4" nozzle (seems really big to me). He indicated that the bags from TSC and Northern Tool are a mix of the little fury (fine 30-60) and shock rock (extra fine 40-80). I will buy a nozzle tonight on the way...

This is the media I have, they have it listed as: Type: 20 40 Grit Size: 50 For Use With: 90 lbs Gravity Feed Abrasive Blaster Where can I get the finer grit size...

I read a thread on this site about how great the black magic abrasive media is compared to sand. I purchased 2 bags from TSC and tired it out last night. It only works for about 5 seconds before it plugs the nozzle ( I put the biggest nozzle I have in 9/64), what size nozzle do I need to use?

If you know your angles (with cad you should have those), just measure the short side. By the short side, I mean if you lay your board down you will have a long side and short side because of the angles. Set your saw to the first angle make the cut, measure from the intersection to where you...

I second the CPO bosch. You can go with a really small unit for only one sink.