Search results

I'm overdue for an update. Lots of small advances but waiting for a V2 engine specialist to undo some errors and do some machining that shoulda been done earlier. I cleaned up and painted the LH and RH air filter housings and trumpets. With time on my hands and being stalled awaiting engine...

A useful resource I found helpful is https://www.mezzaninesonline.com/ -- they also offer staircases, railings, flooring, etc. Pretty much a turn key outfit. They have representatives who will help you wade through the myriad options they offer. They are not the quickest in replies, I...

And that begs the question: Where are the expansion joints? That floor already has 1, or 2, or maybe even 3 cracks in it -- depends how you count them. It ~may~ have cracked as much as it's gonna. It ~may~ crack some more. Do you know how thick the pour is? Do you know how old the pour is...

??? He is referring to the US Flag on the wall

I agree with Codyboy with one exception. Why stop half way across the building with a 15' loft. Build the loft ALL the way across the back wall - 30' How you getting up/down to the loft

Regguy1, I gotta admit, when I saw this photo / / I immediately thought of this: / / prolly doesn't apply to you though,

Here is my little stash of hardware -- about the same as your "after" Small H/W: #6, to 3/8" and then the larger H/W

VHT offers Wrinkled Spray Paint cans in various colors. Typically available through Summit or Eastwood.

About two years ago, (2023-24) I took a couple of photos of my shops. Imported them into PowerPoint. Added Text Boxes. Then made a video of the 8-10 slides - looks pretty much the same today:

Everyone has their own system and degree of OCD when doing so. Here are a bunch of photos of my Icon box, drawers are shown from the top of the cabinet downward: / / / / / / / / / / / / / / Hope this helps

I don't recall the source of this chart but using the part numbers ought to get you there. Anyhow -- maybe it will help you decide on the media. Note that ground glass (same as your medium crushed glass?) is the most abrasive media. Depending on the substrate, that may be too harsh Regarding...

My shop (automobile hobby) is 2300 sq ft. This diagram shows the location of my 5x extinguishers (the one top center is beside my circuit box; others are beside doors) I feel 50/50 about having more -- OK?; need more (where)? Comments

would like to know where this photo was taken

I went one step further when I used left-over angles from my garage door installation. I had them powder coated - along with other door hardware. Garage Door - interior is obvious The left-over lengths protect the plywood flooring in the loft is a bit harder to see / / Close up of loft flooring

@Grant Gunderson Where did you source the red plastic clips / labels that are on each Schiller bin as shown in your third photo? Craig

I have a 2400 sq ft shop so size seems OK (after 4.5 years working in it) -- for now. BUT - I only built a 14' ceiling and now wanna put in a mezzanine - the vertical is pretty tight. A 16' ceiling woulda been better than my 14'. I have 54x 110V outlets 5x 220V outlets in-floor heat...

Good points all -- Thanx

After a delay of two weeks, I received a reply from Mezzanines-On-Line. Still working out the details of anchoring to the wall(s), but with mezzanine, stairs, railing and all hardware: $27,500.

I like this idea but would prefer a smaller plate so as to be less intrusive into the floor space.

It's a pole barn construction. More detailed sketch in PDF Photo is of wall during construction / / Poles are sistered 2'x4' 's / /