Search results

I had one in my amazon cart. 2 turn offs on that. Cost is first. Smaller then the 100# propane tanks and more expensive. Second is that it has to be horizontal when installed as there is no fitting on either end. I’m actually going to measure my top shelf above my compressor and if I have...

Simple.. the psi rating on those tracks is typically 135 or 150 and this will be sitting pressurized at 175.. I had that same thought to begin with as well. Edit: also this is a minor thing, but since they will all be draining into my main tank I’m a bit opposed to draining the rusty water...

Negative ghost rider. I can not put one of those next to the garage. There is not space for it next to the garage and farther down that wall where there is space the snow slides onto from the roof with no direct sunlight so those sheds would not last one winter.

Not all air receivers have all.. some of the new **** compressors I’ve seen have a single top port which has Everything but the drain in a single 1/2” npt. Then a little drain on the bottom. In the scenario I’m looking at the intake, discharge, and drain would all be the single 3/4 in the bottom...

I linked em at costco. Even at HD, Lowes or TSC prices of 150 each they still have a cost advantage.

The area outside is completely un-maintained other then the poplar's that grow like weeds (the 2 times a year I am out there is with a small chainsaw cutting them down). I honestly dont want to be out there for anything ever. In order to put a tank I would also have to pipe it down a ways to get...

Possible yes... But too many issues involved. The outside of the garage there is about 5' before the fence to the neighbors. In that 5 feet the ground is nothing but jagged rocks & my AC unit. It also slopes away in 2 different directions. Lastly getting to it to drain it is very unlikely to be...

So after months of looking for what I wanted & then blowing the hell out of my budget I finally have my Little Big Compressor complete & as I was warned about it cycles way too often for my liking with an Champion R15A on a 30 gallon receiver tank. From cut in to cut out (140-175psi) it takes...

Yeah when I originally committed to this I planned to break even if not come out a little ahead. The 900 for the new tank & motor is what did me in. Counting what I lost on the original tank spent 650 on them & was hoping to find a used motor, but havent come across a single phase 5hp within 500...

Well its alive & done.. Now to get the shelf moved & it into its home, then get a reel installed for it. Overall I ended up WAY over budget on this. I am into it about 700 after what I sold from my old compressors & the parts of these. The biggest chunk of what I spent was the 500 receiver &...

I watched that video years ago. That guy has a very well thought out setup. Other then the tank he welded the crack in.

My thought was actually multiple smaller vertical tanks. Have to get it into the attic through a small hatch so a 60 vertical or horizontal would not work. Realistically nothing bigger then a 30 for both the size of the hatch & then being able to carry it to where it would live while walking on...

Yeah & I was doing it by hand. It was a short run, but needs a few bends to be done right to navigate the compressor stuff in the way

heh... TSC is one of the few stores local to me in my smallish town, but I wouldnt of even thought to look there. Amazon should be delivering the rest of what I need tonight & I have a 6' Tekton lead in hose to connect this to the reel that will eventually be mounted at one end of it.

Ok some real progress..... Searched all over town for some 3/4 OD copper tubing & after like 8 stops found some. The place that had it doesnt sell direct to nobodys like me so they were awesome enough to give me some scrap (about 6'). Then I learned that I cant bend copper tubing without...

Its not the width that bothers me... Its the depth..

That top drawer is why I bought the 44" box...

how did you get the other 20% off?

Paint is done.. Brass fittings going in, though a couple of rough threads.. Thats what I get for buying from Amazon I guess.

Is it leaking or cooling off. The temperature will have a little effect on the pressure. If it’s holding at 150 and not dropping lower then it’s probably not a leak.