Search results

You can rent a booth from them for $300 per day / $1600 per week according to their website

Enclose one side with a piece of plywood and add hooks to store the cord and a few tools.

Have you considered blown in fiberglass for the attic space? Ideally you would do about 18 - 22 inches, but even 8" would help. If you can't or won't do it, have Home Depot do it for $1000 and put it on a Home Depot card to stretch out the payments. Always less expensive to do it youself...

I like the armory hidden behind the bathroom. On the roof the drawing says ridge vent and gable vent, but don't use both or the gable vents will extremely limit the advantage of having a ridge vent.

Thinking about doing breakfast at "Seven Dwarfs" :bounce:

Home Depot stocks them in the plumbing aisle across from faucett repair parts.

Yep Looks goofy with ridge vent only in the middle Run it end to end, stopping maybe 6" or a foot from the end. Do the vent cut two feet shorter to prevent wind driven rain from entering thru the ends. Per the GAF Field Installation Guide Your 3 tab shingles will probably have a different...

If I recall its the blue label can and says right on it WINDOWS AND DOORS

I don't see why not. I have used roof deicing cables thru my gutters and downspouts.

Greenhinge Springloaded hinges that keep the door tight to the weatherstrip. About $85 for a set of six to do a residential 4 panel door

Do 1 more course of architectural shingles and then trim at the ridge as needed, leaving a 2" gap for air to escape. Then put your ridge vent to overlap them.

Its becoming more common this winter. I do an attic inspection and find the space LOADED with condensation. Sometimes its frost and ice. Comes from too little insulation on top of the ceiling and not enough flow-through attic ventilation. This also contributes to the attic space being warmer...

Yes, anything that will block out the wind. Plastic sheeting stapled in place, plywood blue foam board whatever you've got. I tell people this when we are adding attic insulation and notice that a roofer has done improper venting. As long as you have the other vents on top you're good to go.

THIS Intake Air at the bottom, Exhaust air at the top. Ever try to drink from a straw that has a hole in the side of it? Not much draw that way. Same with roof vents. Ridge vent is top of the straw, soffit is the bottom of the straw. No other holes or the straw won't work.

Before jumped on the IntErwEbs, have you called your Morton rep? They are famous for quality work and standing behind what they do. Usually the window installer is responsible for shimming and insulating around windows. How cold is it today? Where are you located? Sometimes what seems to be...

To the OP: Don't know your position in the company, but if you have the authority its time to hand out a written warning that will be followed up with a pink slip. The idiot sitting on the welder has no work ethic and his loafing is the same as stealing from you and the company, as you need to...

My wife always asks, I always say no. "Honey, there's a lot of paint overspray, chemical fumes, and sawdust out there. You don't really want your nice things stored in that type of environment do you?"

gypsum board drywall sheet rock combine it all and abbreviate it = gyproc Its actually a name brand in Australia for "plaster board"

That's what I was going to suggest...I put a sub-panel in my garage and wouldn't have it any other way now.

Search POR for a dealer near you. Can also order online from Eastwood