Search results

No hd54kh I am not having a problem with the solenoid. I am have an intermittent problem with the latch.

I wish to thank those who took the time to respond. But after going through all the answers and trying the solutions I still have the same problem. I may be missing something, so I will keep reading till I either figure it out myself or someone will come up with a solution.

Thank you for your response, I might have to replace it. Although I don't just want to throw new parts in if it is not the cause. Especially since there is no visible sign of wear that may impede the latch from retracting or catching on the strike plate. I inspected visually and also ran my...

I am the handyman and tried the lube weeks ago. So I took out the lockset on Sunday and clean it out and saw a little piece which was broken off. I lubed it up and reinstalled it, thinking that the little piece probably became stuck on occasion thereby creating the intermittent problem. But...

Well let me just explain the situation that I am dealing with. The commercial aluminum door on the inside of the apartment building is not always closing. It closes sometimes and sticks some times. The latch does not always retract when it hits the electrically actuated opener. Any help is...

I have been painting since I was about 12 or 13 yrs old (not professionally) now I am 59 yrs old. I do not want to voice my opinion but I would like to say that my moms home, my home my relatives home (little reminder I am of Italian background, stubborn believe in past experiences and all the...

You can sell some off. OR They come in very handy when you have a handy man mixing cement or tile mortar or transferring smaller quantities of drywall mud especially if he is the type that does not clean up after himself. Let the contents dry out and discard. Not my way of doing things but...

That is probably why it was such a great find. I guess it was stock that did not sell obviously.

I don't know if has been mentioned before, but here is what I would like to add. I like pipe clamps, 3/4 preferred. Why? Well I can extend any pipe to any length I want just buy adding a union to the end of the clamp. So I can carry 3 foot clamps and 3 ft pipes with a union and I can make a 6...

Maybe multiple cuts with a circular saw similar to cutting dadoes set at the proper depth. laying on its' side. But not to destroy your saw You should use some kind of wood spacer as a sled. Use different thickness wood to raise the saw off the floor and and clean the rest with a chisel and...

The second masonry/stone drill bit is for a fluid cooled drilling machine and I believe it is not necessarily hammer/percussion drill.

Hi windex23, welcome to the Journal. You may have noticed that there are a few of us on the Journal. What I mean by Us is that there are a few Montrealers here. Hope you enjoy and if you need a support group for an eventual tool addiction you can call on me.

Get the Dust Deputy or the Cyclone it helps to keep your filters inside the vacuum clean from any build up making it more effective.

Nice I am going to look into this item at a later date.

All I have to say is if you have only a couple of hours of tile cutting, buy him and his better half a couple of tickets to a long movie (the longer the better) or a play, and do the cutting then. Best of luck. Thinking outside the box I hope it helps.

I have not bought into the One Key system yet BUT I am willing to run the app or bluetooth to help a lost tool find its' rightfull owner. For this reason I am thinking of installing the app. I feel that the more tools find their owner the more chances that this technology will grow and be more...

The only thing I would like to add is that if you put in a door sill to hide the discrepancy in height like seen in the video I would use a marble sill. The reason being that if there is a spill the marble will not absorb the water and would contain the spill on the inside of the washroom.

So maybe some of my fellow garage members can point me in the right direction where I can find 80/20 aluminum rails for a good price.

I agree the price is out there but let me explain why I was searching it yesterday. I forgot exactly what options they offered so wanted to refresh my memory and most importantly wanted to save the pics to my computer so that in the near future I can refer to the pics and take it from there...

I would like to thank anyone that took the time to read my post. But I must say that yesterday after countless hours scouring the internet, I woke up this morning with a few tool companies names and low and behold found what I was looking for. Here is the link . Please view and let me know...