Search results

ever wondered why the IR guns,some say assembled in USA.its because of those bearings.the ones that I have taken apart,don't know if they are the original ones,always have Japan on them. when I take the rotor and housing out,specially the really really nasty ones,I drip some air tool oil around...

thanks much Truxx1956,you have been very helpful,really appreciate all your input. I opened the side as you mentioned,and boy what a surprise.I was thinking metal shavings,broken bits.But,boy oh boy,this thing is pristine.I poured some oil before opening it,not even a piece of shavings in...

Most of my air tools are the usual,impacts,ratchets,grinders,sanders.which require less than 120 psi.I already have a 60 gal. CH that I got a pretty good deal from Lowes.Only thing with it is when I run my grinders and sanders it tries to catch up,pretty decent but it constantly runs with those...

thanks for the input.the number stamped on the end of the crank looks like "100".any idea what that means.'81 or 01".the Baldor motor has this label on it: Frame 56 H.P 3/4 Volts 208-230/460 Amps 3.3-3.0/1.5 RPM 1725 Hz 60 PH 3 I turned the pumps by hand,and 1 of them has a slight knock,could...

I got this off Craigs for $100 today.Its got twin 108 pumps.two 1725 rpm Baldor's,3/4 hp.Only thing is,its a 3 phase,I've checked around and I think I can get a motor in the $90-100 each range. I have a few questions as this is my first attempt at disassembling/cleaning a compressor.How do I...

the bay got this deals: http://cgi.ebay.com/Klein-Tools-8-Journeyman-Long-Nose-Pliers-5-Pack_W0QQitemZ120390610744QQcmdZViewItemQQptZBI_Electrical_Equipment_Tools?hash=item120390610744&_trksid=p3911.c0.m14&_trkparms=72%3A1205|66%3A2|65%3A12|39%3A1|240%3A1318|301%3A0|293%3A2|294%3A50...

aren't Ridgid batteries guaranteed from Home Depot. most of the new/latest chargers actually recommend leaving it in the charger as most have the "tune up " feature.

$16 part at this place: http://www.ereplacementparts.com/milwaukee-650921-ser-962a-sawzall-parts-c-131_5093_14916.html they have 13 in stock.don't think you can get a sawzall for $16.

here's a couple that ended at less than $150 for the set: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=260369670307&sspagename=STRK%3AMEWNX%3AIT&viewitem= http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=300298197693&sspagename=STRK%3AMEWNX%3AIT&viewitem= at $20...

doh,I forgot this are stamped Harley:lol_hitti so he can't actually see the "BAHCO".

it looks like the seller is selling it for someone,if you have the wrenches in front of you.there is no way you can miss those bold "BAHCO" letters.

browsing thru the bay and run into this: http://cgi.ebay.com/ebaymotors/Harley-Davidson-7-Piece-Wrench-Set-made-by-Snap-on-Tool_W0QQitemZ200316746837QQcmdZViewItemQQptZMotors_Automotive_Tools?hash=item200316746837&_trksid=p4506.c0.m245&_trkparms=65%3A10|39%3A1|240%3A1318 maybe I should do the...

Metabo! Don't know if the current ones are still German made.

corporate America does it! they know what they are doing.lets see,re-badge wrenches,sockets,ratchets.Over inflated horsepower claims on compressors.Cordless drill that says "Assembled in America".claimed "12volt cordless drills",that are really 10.8volts. not condoning the seller,as it is very...

Dewalt,made in Mexico=America,North America that is! what voltage range are you looking for? I'm guessing,since you do bench ****** work,it will be in the 12-14 volt.the 10.8volts are pretty handy.Milwaukee and Bosch label theirs 12v,Bosch,Milwaukee,Hitachi,Makita have their own versions.they...

washers face's up! you are missing the "hammer frame rear washer".it sits on the bearing.so,it should be between the hammer frame assembly and bearing.that washer has 2 different surfaces,the one that is not smooth,it face's down.

you probably know already,but just in case,do not try to install that rotor with out the cylinder.it will get cocked and it get stuck and gouge the housing.and remember the hammers goes in a certain way.be careful with the reverse valve as it has a small spring and ball.

completely agree about IR having an online store for parts.I had to get my parts from Snap on cause IR redirects you to a local distributor to get parts.

Looking into buying either one,and get it for less than $400.Was wondering if this are the same,manufacturer?.Is CH the OEM for the IR one.anybody owns one and can compare if they are the same.As far as I can tell,they both have the same Emerson motor. IR Model# SS3L3...

Anyone know where I can fine the exploded view for this impact? this is not what I need: http://buy1.snapon.com/catalog/parts/pro_det.asp?Item_id=100&group_id=7508 I think someone posted one,but I can't find it.thanks in advance!