Search results

I figured a turnbuckle bolted to the end of the board, other end connected to the motor, would work. The mounting plate on the motor is slotted.

I'm looking for a belt for the compresor now. I'm using a 3.25" drive pulley, 12.5" compressor pulley and the center to center is 17". The calculator tells me I need a 60" belt. I can shorten the center to center for a shorter belt, is there any benefit to doing so?

I've got 4x2 bulbs + 1x4 bulb fixtures now, but I'm going to have pick up some of these for more light!

To call your garage and work inspirational would be an understatement. Nice job!

I'm in. For the uninitiated(me), this will require a 50amp service hookup? its not 50amps at whatever voltage the converted charge is?

I figured I would try out the pump as is and add isolators as needed. I've got an old air tank, 8 gallon I think, that I could use as an expansion tank too.

Re: Lets see your Shop Audio! Klipsch floor speakers, single 8" woofer with 8" horn, i didn't have room for in the house when i moved in. TV in the bottom left, against the fridge is a 42" plasma I picked up for a song today.

I got a little bit of time on the garage tonight. mounted the motor and compressor to some 2x2 and plywood. Mocked up with screws, will go back with bolts later. Put it up on the shelf to see how well it fit. should be getting a broken compressor and tank from a buddy this week...

Here's where I'm at so far.

I'll be doing the same thing with my setup. I picked up a 3hp pump and motor from HF, and will run them separate from the tank due to space constraints. here's the link http://www.garagejournal.com/forum/showthread.php?t=275191

Here's a recent pic of the bronco

I have been a member for a bit, but only just began posting. Nothing special to speak of, just a 2 car attached garage. We built the workbench when I moved in. We ran a 30amp service at that time for future tools. I'm currently working on installing an air compressor on a shelf with a remote...

I have been a member for a bit, but only just began posting. Nothing special to speak of, just a 2 car attached garage. We built the workbench when I moved in. We ran a 30amp service at that time for future tools. I'm currently working on installing an air compressor on a shelf with a remote...

I may end up adding some air tool organizers under the shelf as well. http://classicbroncos.com/forums/showthread.php?t=249381

Like many of you, I found that far too often, what I needed was not close enough at hand and my workbench was constantly cluttered. Underneath my workbench had become a collection of oversized items that needed a home. When we moved in, only the shelves were installed, my dad and I installed...