Search results

anyone actually seen a 44" tool cabinet selling for more than $400? or the 56" for more than a grand?

FWIW, I use a google voice number for all public facing interactions. If anyone decides to spam me, it is easy to block their number. I only give out my actual cell number to people I personally know.

I really like mine. gives great light, good spill, good temperature. On;y cpomplaints is the way it mounts and the cord. I would prefer to install the screws through the fixture and a hard wire installation instead of the plug.

Mostly use it for youtube videos on how to do this or that. Also fun to put the kids in the car and go to a "drive in movie". They get a kick out of it.

thanks for the advice. will do!

got most of the upgrade completed. Panel is in and wired(correctly?). Compressor is in, things are cleaned up. It is looking good. This is what I started with After sanding and priming After paint, John Deere yellow. I had a partial can laying around. Some mockup Final...

I was in HF today asking about this chest. The checkout clerk pulled out a flyer for the March parking lot sale and the chest was listed for $349. That said, i'll try to use the posted coupon tomorrow, since I'd rather have it now for the extra $10 than wait another month.

From the amount of interest generated on just one forum, i'm surprised bob isn't thinking about becoming a domestic distributor. Heck, I'd give bob 5-10% extra just for the hassle and continue to go to him for the consumables because he has a good rep and is looking out for the community. My...

I've gotten most of the wiring done. got the compressor wired and tried it out. Far more quiet than I was expecting. It didn't walk around either, though I will still screw it into the shelf. I've also picked up 2 air tanks, one 20 and one 30. I'll put the 20 on the shelf and the 30 in the...

i picked up one of these to go over the workbench. i already have 4 4' 2 bulb fixtures, but this really lit up the work area. i'm happy with the light, except i wish it had a more traditional installation instead of the wall plug.

got a little more done on the electrical. Compressor is wired up 220 via 20amp circuit. Goes through a lighted switch, so I've got a quick way to check if I left it on. The shop lamp is wired through a 15amp circuit and I used a switch/outlet for that. The outlet came in handy for the small...

add me to the consumables list too

I'm not in a rush. I can wait for as long as it takes to get it together. Bob has a day job, so he isn't going hungry. Unless you are fence sitting on another unit, I don't see where anyone would want to rush this or pester bob for updates.

well, its been up for a week and hasn't fallen yet, so I guess it is good to go. this one is mounted with three lag bolts into a stud.

this thread reminds me I want to make a battery adapter for my ridgid batteries to power lights on my jog stroller. anyone have a dead ridgid tool they wouldn't mind cutting the bottom off of, I would really appreciate it.

After getting my TV, I can't recommend the mount for heavier, +40lbs, TVs. Not that the mount failed, but it definitely does not move as easily as you would expect it to, and it does not feel as secure as I would want. But it is on the wall now, only way it is coming down is on its own, if it...

picked up a gallon of compressor oil, 59" kevlar v-belt, 8 position sub panel, 30 amp 220 breaker, 20 amp 220 break, 2x20 amp 110 breaker, double pole illuminated switch, junction box, cover, wire clamp. Got home and needed a win, so I went ahead and finished the TV. I get it mounted, roku...

can I run the wiring directly from the wall(continuous to a double pole switch off of the breaker) to the pressure switch, or do I need to put a junction box on the wall and run the wiring through a conduit from the wall to the pressure switch?

not sure on the monoprice, but I just ordered this one for $29.59. http://www.amazon.com/gp/product/B000WYVBR0/?tag=atomicindus08-20 Had to add some flat stock spanners for an older plasma, but it looks like it will work for me. My TV weighs 65+5lbs added weight and the mount is for up to 88lbs.