Search results

  1. T

    Hoist position?

    I'll check my measurements and get back to you. For an asymetrical, ideal placement is 10ft or more off the back wall OR bench work surface, but 9ft will do. I'll shoot a measurement of how close I am to the wall on the drivers side - I'm pretty close and have no issue getting out the car...
  2. T

    Strip Lighting Configuration & Number of Bulbs

    My advice: Don't take everything here as written in stone. Use common sense. If you're thinking to yourself, "that seems like a ton of light for such a small area", it's because compared to what we are used to in our everyday lives, it's a ton of lights for a small area. I did outlet...
  3. T

    New construction - Electrical and Lighting

    Here is my layout. Will do 4 switches - two banks on the right side and two banks on the left side. The side lights will double as the walk-through lights as well as additional light when working on the lift. Note that they are mounted at 10ft high - on the side of the lofted area. I'm going...
  4. T

    New construction - Electrical and Lighting

    Update: I ended up purchasing Simkar fixtures from my local lighting supply store. I'm going with 20 bulbs in the 10ft ceiling side and 22 in the lift side, including 4 bulbs for side lights and 2 for undercabinet lighting.
  5. T

    Help wiring compressor

    He said he likes to run an extra neutral wire on 'future' stuff - that way in the future I could run 120v out of it if necessay. I'm not sure if it's worth the $25 difference in wire cost to me, however.
  6. T

    Help wiring compressor

    FYI: After speaking with my electrician, he suggested pulling 10-3 for a compressor and 8-3 for a welder. He did suggest keeping the 8-3 run as short as possible. A purchase of either is not imminent, heck, maybe not ever. But maybe the next guy who lives in my house will want them? With...
  7. T

    Ballast info-Phillips Advance

    I opened up a 4ft t8 fixture at my local big box store. This is the ballast inside. I can't seem to find any info on it. Decent quality unit, or stay away?
  8. T

    Help wiring compressor

    I've actually been searching to and not finding too much - my problem is I want to wire for a FUTURE compressor (& welder) - I don't have either right now. I just need to know how big of wire to pull!
  9. T

    New construction - Electrical and Lighting

    Noted. I'll add extra dedicated circuits for future welder and compressor. I'll give this a shot. I've looked at another thread you've commented on and have subscribed to it - I'll try to copy that one and come back with a better layout. I used a calculator last night and came up with 28...
  10. T

    New construction - Electrical and Lighting

    I recently built a new house coupled with a detached 34x30 garage (pictures here). Looking for some feedback on my electrical and lighting ideas. The garage has a 100amp subpanel already installed by the electrician. I'll be pulling wires myself and using him, as needed, to hook things up...
  11. T

    Need help with some fancy RF lighting controls

    This. I have Control4 in my home - you can program such that when you turn a light on, it only goes on 80% intensity. You can tell the difference when looking at the light going from 100% to 80%, but you won't notice a 'lack of light' in the room. I do it on every light that is on my system.
  12. T

    Four (4) Rotary SPOA10 Lifts in Chicagoland

    Still available, I'll take one.
  13. T

    Detached 34x30 in WI

    Pan of the garage. Still need to pick up another car, then my long term project can begin (2jz into a '79 volvo 242GT). If the weather ever warms to near freezing, I'm also going to start pulling wire for outlets and lights. Any suggestions on cabinets? Through searching, it looks like Saber...
  14. T

    Detached 34x30 in WI

    My builder did the plans. It's a very simple building. I've gone back and forth, but it's probably just going to be insulated and drywall finished. Probably epoxy the floor and then call it a day. Fill was probably about 3-4ft. I'm bad at eyeballing that sort of stuff. It's slab on...
  15. T

    Detached 34x30 in WI

    Building with Zach was pretty painless. It was the first home we built - I'd build again. No where near the horror stories you hear from some people. I suspect many people just can't dedicate the time to building or are piss poor communicators. I talked with our builder at least twice a week...
  16. T

    Detached 34x30 in WI

    I'm located in the town of Waukesha. HM Ford Taurus? Fan of DT? Shoot me a PM if you are, I have a little bit of history with DT through my father. Thanks. I see you have VWs. Frequent vortex much? My first car was an 01 GTI VR6. Picked up a 92 Golf as a daily and turbocharged the VR. Sold...
  17. T

    Detached 34x30 in WI

    Low time lurker of the forum, however I also had a simple 3 car attached garage that was filled to the brim and very ugly. About 18mo ago, my wife and I decided to look for a new home to accommodate our growing family (twin boys who'll be three end of December) and also to give us some more...
Top Bottom