Search results

My order was cancelled.

Northern has some. Not sure about how good a deal. https://www.northerntool.com/shop/tools/product_200773833_200773833 Patrick

Thanks for all of the help! Fast Eddie thanks for the link. I'll check it out as well! Patrick

I have a natural spring under my house and the previous owner installed a sump in the basement using a piece of 24" metal corrugated pipe surrounded by concrete. He was using a piece of plywood to cover the hole and for obvious reasons (wood absorbs moisture and mold grows), I would like to find...

That's what I am planning to do....

The area in red is where I want to put the cabinet. This picture is before I put up the railing. https://www.homedepot.com/p/WeatherStrong-Assembled-24x34-5x24-in-Miami-Island-Sink-Outdoor-Kitchen-Base-Cabinet-with-2-Doors-in-Rustic-Gray-WSISB24-MRG/300140222 I found these at Homedepot.com...

I love this site.... The stainless sinks/ tables I have found werent't enclosed. I had considered using one and enclosing it myself. I'll look into the azek panels. I had planned on doing the light as you suggested. Here in Atlanta we might only have a handful of nights each year that are cold...

I have wanted to add an outdoor sink for a while now and I'm finally ready to get started. My plan is to install it on the back deck which is covered and steal water from the kitchen sink on the other side of the wall. I would like to have some sort of cabinet (like a bathroom vanity) to hide...

Macgee, See other thread.

Same here. Promo items wouldn't discount any further than price listed on site. Non sale items I tried discounted 10-20%.

PM Sent. We hang these all of the time in manufacturing facilities and it's not easy. Threaded rod isn't the best method due to vibration. Roof structure has to be able to support the weight.

My late 30's South Bend required a few washers to tighten up the cross feed screw. The Ebay manual on rebuilding a South Bend lathe that comes with the felts shows the process. I was able to get my backlash down to .010". I also use a dial indicator for mounted on the crossfeed when I need to...

He just moved in with us a couple of weeks ago and has been really curious about helping me out in the shop with cars and such. Last weekend out of the blue, he asked if we could make something with the lathe. I actually had him standing on a platform after the pic was taken. I have a dial...

My latest project. Gifted to me after by a friend from the estate of his brother that passed away. It needs a little TLC, but I think it will make an excellent vise when it's done. I only found one reference on the internet for the #194 on this forum and the owner was looking for a new nut. This...

So much win with these pictures, I don't know if I can do them justice. My grandson Sylvano learning to use the lathe. Started him off making a copy in plastic of the first test bar I made on a lathe at SPSU over 20 years ago.

I received the tray, but the oil container was just cancelled. Out of Stock. Now listed at $90 on Amazon. Oh well.

http://atlanta.craigslist.org/atl/tls/5244354254.html Neat looking Anvil/Vise in Atlanta.

I was able to pick up a set of wrenches and 1/2" sockets without problem. Cashier retrieved my order and didn't say a word about it. Giving the wrenches to my grandson for Christmas to start a tool set for him.

For a driveway, it can be real dusty. For the parking pad, it's been awesome. The price is hard to beat too.

For what it's worth, I asked the local store manager if the 44" toolboxes were included in the upcoming memorial day sale and he responded no. Then he suggested I look on line for the harbor freight coupon website. He said it usually had a coupon for $10 more than the sidewalk sale price. I...