Search results

Some of you may know that I’ve been a Craftsman tool fan all my life. I started purchasing their tools over fifty years ago. Weekly, one at a time, thanks to the proceeds of my childhood paper route. They served me well for many years. And are still in my tool arsenal yet today, that has since...

Lincoln AC-225 compact stick welder with a welding amperage range of 40-225 amps. Weights 110 pounds. Wired for 230 Volts single phase... This machine is a factory demo welder. That looks as if it was never used.. And comes with everything you see pictured. Factory list price 420.00.. Asking...

Four piece small hole gage .125 to .500 with plastic case like new condition $25.00 Six piece Telescopic hole gage set in plastic case .312 to 6". Central brand Made in Japan. Nice quality set like new condition. $65.00 Goodell Pratt inside micrometer to 12" with fitted case. Good...

Micrometers 0 to 6" carbide tip, reads in tenths (.0001"), locking, ratchet thimble, with standards, with fitted wooden box. Made in China. Used and in good shape $100.00 Depth Micrometer 0 to 6" with 4" base. Reads in tenths, locking, ratchet thimble, and fitted wooden box. Made in...

MacBlast Cabinet model number 3-36X24 serial number 5998-95. Cabinet is 24” by 36” by 65” tall with two fluorescent bulbs. Dust collector model number 95 CFM DC serial number 5998-95. And is 14” diameter by 62” tall 120Volt. Asking price $550.00 Side door for smaller parts... Cabinet...

The 16 speed 16” Central Machine Floor Model Drill Press.. This machine was manufactured in Taiwan and is better quality than the ones made in China today. The spindle goes from 170 to 3800 RPM. This one has a new made in the USA 5/8” Jacobs chuck on a #2 Morse Taper Shank. Runs true within...

The GrayMill's Part Washer is 24” by 36”. It's in perfect shape other than needing to be cleaned up. That I will do before it's picked it up. Sells new for $850.00. I like to get $400.00...

Craftsman 6” lathe has a four- jaw chuck, and some other tooling including an indicator. And a 1/ 2 HP motor and switch. Although it wasn't wired for reverse. The motor and switch could be wired for reverse. The lathe is really an entry level machine with no whistles and bells, ie no quick...

Guyson model number F2000 SandBlast Cabinet with dust collector is in good working order. But need new gloves and lid seal. Simple tape-backed weather stripping can replace this seal. And gloves would need to be purchased on line. I was told that Guyson sells them for $55.00. The vacuum has a...

1,000 pound capacity, 3” to 26” working height. Looks sturdy and the ratchet mechanism works smoothly... How old is it and what would it be worth.

Like the rest of Snap-On products, this air compressor is top shelf. Two cylinder all cast iron two-stage pump mounted on a vertical 80 gallon tank. The heads are in a “V” configuration for better more even cooling. Driven by an open 184T frame 5 HP Marathon Electric Motor with 1745 RPM and...

I already own two air compressors that I have purchased new in the past few years. Up until now the DevAir has been my main source for air. With the BendPak setup to kick in when the DevAir cannot keep up with my needs. A maximum once a week happening. With my last acquisition I picked up a...

I’m finding all kinds of goodies from my newest acquisition. I came across this 0 to 1/2" Starrett model number 323 micrometer. Although I must have six 1" micrometer’s and a full set up to 12", I’ve never owned one this small...

Can anyone tell me what model number and list price for this Snap-On roller cabinet combo is? The roller cabinet is about 51” wide, 23” deep, and 38” tall less the height of the casters and with sixteen drawers. The top cabinet is 36” wide, 22” tall, 22” deep and has eleven drawers. v

Just when some may think I have enough toys, along comes that old defective gene of mine... I just purchased the entire contents of an antique car restoration shop! I have already taken four trips with my 22' car hauler and need one more to pick up the rest. Included are a collection of twenty...

After an unsuccessful morning at an auction. I took a short drive to inspect a Radial Arm Drill Press that I've been negotiating on for the past month. It's a Taiwanese built machine that had very little use. Other than a cobbled up table that didn't originate with this machine. And a broken...

In replacing the Facet electric fuel pump on my motorhome's diesel generator, the fuel line fitting on the fuel filter could not be salvaged. Being in a tight area, an opened end wrench merely collapsed the fitting. Most likely the other fitting next to it would be destroyed if it was removed to...

Below is a compiled spreadsheet of the specifications for three 10,000 pound capacity two-post lifts. All three are ALI/ETL Certified. In alphabetical order: BendPak, Ben Pearson, and Mohawk… I own the BendPak and Mohawk, while the Ben Pearson is at a friends work that I had the chance to view...

Hottest $22.00 garage sale tool find of the year. And of all places in a small town north of San Francisco. They are 1/ 2” universal joint impact sockets in a plastic case that has a Northern Tool emblem. Inside are eight SAE from 3/8” to 13/16” hex sockets and eight Metric from 13 mm to 21 mm...

Knowing a good deal when I come across one, and wanting to increase the capacity of my air supply in my garages. I purchased a new model LS580V-601 TriMax compressor. The Trimax is a 5 HP three cylinder air compressor by Bendpak. The 80 gallon vertical A.S.M.E. tank is manufactured by...