Search results

I noticed the local Fastenal had these interesting carbide wheels. They have full length carbide inserts that are about 1/2" long, so they can cut with the edge or grind. They say it's for every material. The list said something along the lines of cement, masonry, stone, glass, stainless...

I know this should probably be in the wtb section, but.. I've never bought from the SO website, and I'm under the impression that your local SO guy makes the delivery. If SO ships directly to your house/business, I'll go that route.. and you can disregard this entire message! MY so guy doesn't...

Bought a used fbf on ebay, real good condition. Decided to take it apart and lube it, with as dirty it was. One screw gave me a fight and I ended up stripping it to hell. Last person put way too much blue loctite! Anyhow, can I get new screws or do I need a rebuild kit? Here is the little...

Hey guys, I've been using different types of pliers and things for crimping terminals for car work etc.. and am tired of halfassing it. What's the best crimper on the market right now? I've had my eyes on the SO PWCS7, it seems like it's a good unit, and I like how it has a gripping nose at...

Hey guys, In the market for so ratchets.. looking for 3/8: flf80 fbf80 fx80 I'd prefer the fbf80 And in 1/2" pretty much any chrome flex heads.. let me know what you have! I can either pay, or trade some of the stuff I have (some of it is pretty amazing!). Let me know! John

Hi, Recently I've been using my camera quite a bit.. And stumbled upon this LocLine. I found people use this stuff for everything from the camera mounts, flashlight mounts, phone holders, etc.. So, I plan on buying enough to finally convert my bandsaw to coolant, make a few mounts for the...

Well, I don't have the 'want' for my 12v drivetrain anymore. I had a 96 reg cab long bed 4x4 5-speed 12v cummins that got totalled in a crash (Drunk driver hit me). I've been slowly taking it apart and it's got to the point I don't want to really store it anymore. 12v cummins 215hp p-7100 pump...

Well, I finally got around to making one. I decided to go smallish and went with the Rubbermade Brute in 20 gallons. I went in a different direction when it came to anode selection, as most people use rebar. I figure the more surface area the faster it will work.. so I went with 3" wide 1/8"...

Well, I finally bought my first SO ratchet. You guys are terrible. I picked up an fcf72 off ebay used in really good condition. I haven't had a chance to try it yet (Just picked it up at home) but, should I take it apart and RLL it? I use RLL in all my other ratchets, even my unsealed Craftsman...

I have a Blackhawk by Proto 3820 3/8" 12-point SAE socket set complete for trade! It is in excellent condition. I'm 95% sure it has NEVER been used. No pits / scratches / nicks etc.. chrome is 100%! Even the arbor on the ratchet show no discoloration from being used.. $65 shipped to lower 48...

Remaking FS thread for more items, please delete!

Hi, I've had good luck with the Wanted section before (Thanks again, PL_Silverline!) and decided to try my luck again. I'm looking for an MG725 in decent condition. I'm also looking for metric (foremost) and sae flare nut crowsfoot Or Flarenut wrenches. I have quite a few hydraulic...

I got a Proto j6113nmf 3/8 dial torque wrench that looks brand new in a box for $88 out the door, that was calibrated on 3/11 last year and a proto Blackhawk 3820-s 3/8 socket set for $22.. I've been needing a torque wrench in this range for a while... I have no use for the socket set, but I'd...

I found this at a local pawn shop, but had no mfg tags left on it. The buttons/dial looks like the ti max impacts... Any ideas? I picked this up for $100 even though I have no use for it.. 60" pipe wrench ridgid USA made. I put a speedaire riveter on lay away for $40 out the door.. Its a...

Well, my ebay auction didn't work out, unfortunately. I may just go the truck route, what's a decent truck price for it?

Well, I'm in need of an air hammer, and have read probably 80+ threads on this forum in regards to the PH3050. I was almost sold on it, when I came across the IR 118max. It's quite a bit bigger, 1.6" longer than the SO, and 1/2" longer stroke as well. They both have the same BPM. The 118 is a...