Search results

Take advantage for a short time of 10% off with our promo code 10PER-OFF – good until only the end of August. No minimum order so load up at ernstmfg.com!

I patterned this after the R & R Bead Breaker that's sold in Australia. It still needs some fine tuning, but it got the job done. Not as well as the original or a Bead Buster, I'm sure, but the price was right.

Some of you already know about this, I can't take credit for coming up with it. Not wanting to build a tank, this seemed like a viable option. I started with a piece of an old bed sheet, soaked it in a solution of water, vinegar, and salt. Layed the sheet over the lathe bed, covered it with 2...

8-32 x 1/2 100 deg flat head philips - 1 bag of 100, 1 bag of 97; $12 shipped each bag. https://www.fastener-express.com/8-32x12-100-deg-flat-phillips-screw-red-qty-100.aspx 8-32 x 3/8 100 deg flat head philips - 1 bag of 100, 1 bag of 97, 1 bag of 96; $12 shipped each bag...

Lot of 20, new, here's a link: https://www.carrlane.com/product/toggle-clamps/toggle-clamp-accessories/clamping-spindles/flat-cushion-spindles/cl-14200-fc 1/4-20 thread, 2 1/8" overall length. $30 shipped to lower 48.

Need to replace 62 ft of wooden fence that's falling down/wooden posts rotting. I'd like to go with metal posts, thinking one of three options: https://www.homedepot.com/p/PostMaster-1-3-4-in-x-3-1-2-in-x-7-1-2-ft-Galvanized-Steel-Fence-Post-633663-1/307938011...

Have some unidentified objects from a recent auction purchase. The black item looks like maybe the sector from an indexer? The 3 cylindrical objects measure about 3.6" long, the knurled part is 0.5", largest diameter is 0.875, longest diameter is roughly 0.625. Two are countersunk on both...

Just the handle - $40 shipped to lower 48.

This is a Delta branded drill press clamp, purchased around 1995 - the stud measures 0.488 and 12tpi. The only standard that seems to match that is BSW 1/2" - 12tpi. Is that plausible, and why on earth would they have picked that, vs. the common 1/2 - 13?

Can anyone tell me how the pin is supposed to be retained in the handle? Admittedly, I don't know that this is the original pin.

Parts came from a 4 1/2" wide Morgan 88 - I'm missing the movable part on this, otherwise I'd keep it. The screw (7/8" 4tpi, 16.25" overall) has some tearing in the threads (pic is typical), but the nut (sold) moves smoothly over it's length. Not quite evident from the picture, but handle has...

1 1/4" EMT Bender (Benfield) $40 1" EMT Bender (Benfield) $30 Lot Of Four - $80 60 shipped 1 1/4" Hickey (Henderson E-Z) 1" Hickey (Henderson E-Z) 3/4" Hickey (No Name) 1/2" Hickey (Henderson E-Z) I would prefer to sell the EMT benders locally as they're bulky and a PIA to ship. The Hickeys...

All are 5" OD, 1.125" ID, 0.26" mounting holes. All but item 5 have mounting holes on 1.75" bolt circle, Item 5 has mounting holes on 1.635" bolt circle. All are 1/4" thick. 1,2,3 are 33,31,29,27,23,21 holes. #1 has wear around mounting bolt circle. 4,5,6 are 20,19,18,17,16,15 holes. 20 and 18...

Very clean, little use. I tested this by calibrating with distilled water. $40, includes shipping. Local pickup gets a discount. SOLD!

Made in USA, minimal wear. Two of the adapters (M10x1.5 and M14x1.5) appear to be non-original. One adapter (M16x1.5 shown) has a slight chunk of thread missing - I tested it with an M16x1.5 nut, which threads on fine. $75 $70, includes shipping. Local pickup gets a discount.

For 14 - 1.25mm threads. Tap is in good condition, tool has been modified by previous owner to accept 5/8" socket on end, still accepts original crossbar in through hole. Quantity six of five different length Helicoils are included. $85 $75 $65, includes shipping. Local pickup gets a discount.

Scored one of these at the auction last week, apparently a GP 3030. Little to nothing online, other than the patent. Came with five sets of shoes, from extra small up to jumbo and the shoes are adjustable angle-wise. There are two threaded rods, one left hand, one right hand, and it adjusts...

Not sure if this is a deal or not...

This came with a bunch of automotive tools, mostly pullers and spring compressors. Both of the "arms" are the same, one is fixed at the end with an e-clip, the other moves along the threaded rod. Overall length is about 10", each arm is about 4" long. The hex head has a square for a 3/8"...

Until midnight, June 22: https://olsatools.com/collections/all?utm_source=Klaviyo&utm_medium=email&utm_campaign=Prime%20day%20free%20shipping%20promo%20%28VHeXFj%29&_kx=iVDS1zDhl_CUH35KNH1UzynkM8yPEOfzqgX1YUcDbco%3D.WmgGxM