Search results

Installing Wall Pak lights on the end of my building. The wall paks are larger then rib spacing and there for will sit off the wall a bit. My plan is the make(laser cut) a sheet metal bracket to hold the light with the proper spacing to land in the between the ribs and screw into the girts. My...

I have the Milwaukee and it works awesome. I used it for hanging all my vapor barrier plastic on the ceiling in my sheet. They did a great job of holding up almost 30lbs of plastic sheet when starting in the middle. I used the cardboard reinforcement method of stapling though the cardboard to...

Cure is based on thickness if I'm reading the graph correctly. Also it is liquid cure per the description mean it likely needs to be submerged to cure if I understand correctly.

Is you box not flush or slightly inset from face of the drywall?

I like to spin bits backward between the jaws to make sure that I don't measure the narrower portion behind the area that cuts. Appears you are measuring it wrong. Did you measure the hole sizes it drills(don't see an answer to this). Did the bolt not fitting drive you to measuring the bit?

One of the blacked out tools I believe is a cordless pocket hole machine, which makes sense considering what a larger focus of Kreg tools main line is. That is the only one that seems like a game changer for the home shop, you will be able to work big panels in place with a handheld machine...

i would start by pulling it apart, and check the switch works and that the motor is getting power.

I assume the C is the quick answer to the snapmaker kickstarter possibly?

IH?

So harbor freight corporate "cooperated" then.... Way with words you say......

They they use steel or is it aluminum, aluminum is used alot for wrapping window trim etc. See if a magnet sticks to it. OP, I used the 29 gauge pro rib on the interior of my building, I had no trouble with oil canning screwing the flats, I was able to even teach my wife who is not a DIY'er...

I have had a pioneer WYS series for the last four summers. It cools my 1600sqft garage without issue. I installed it myself, it did require a vacuum pump for install. It has been flawless, only thing I do it clear the filters and the outdoor coil. I will say I only use it for heat to about 30F...

When is NPS this year, can't seem to find much about it.

Milwaukee M12 Installation Driver. Cat. 2505-20(Bare Tool with adapters)

Curious to if any one has one. Recommendations? I see the vevor one all over the socials and its real cheap. Stick with a brand name? Suggestion on what that would be. Have two fairly large areas to sweep, 48 x36 shop parking space , and 46 x36 house garage parking area.

Guessing they are charging you $20 for the labor to package it and the supplies, mine came wrapped in a cover and shrink wrapped. To me it didn't seem like a bad deal. If you have multiple stores close to you check different stores. The fees were different between my 3 "local"(all 2 hours...

I know on my lift master you can override this by holding the button.

Curious if anyone using using Wall Pak style of lights on there building. Would like a photo cell, but likely will be wired to a switch with a programmable timer/Wifi connectivity. Building is a 76'x48'x 16'. Though is two wall paks on the ends, and do soffit lighting along the front...

If you really want to use prefinished birch I would look for a hardwood supplier(cabinets/Millwork) as it is usually quite a bit cheaper then similar product at menards.

I have a 20% off that expires at the end of the month if anyone needs