Search results

That is true but mine includes insulation and the engineering drawings. Reb

I just had mine built just west of Fort Worth. I used Miller Metal Buildings out of Burleson. Mine is 27X45 with 8X16 and two people doors insulated with engineering drawings ( $800). Total was $18,800. Your quote sounds a little high to me. Slab was 6". Your more than welcome to come out and...

I have a new Devoe floor with clear coat. I put down drop cloths before I painted the walls but some got through holes in the drop cloth. What is a good way to get the latex paint off of the epoxy floor? I was thinking scotch brite and mineral spirits. Any other ideas that won't hurt the...

Get a small regulator and put it on the gun. That way you can adjust it easy on the fly. Prime it first with a light coat of a good epoxy primer. Then follow that up with a high build primer. Sand and prime again untill you are happy with it and finish it up with some 400 to 600 grit wet. You...

Sorry they are gone. Jole67 got them. Reb

Instead of trying to fix the CN joint, go to O'Reiley's and get a rebuilt half shaft. The ones for my Corvette were only $60. That is alot less trouble if it is the CV joint. Reb

OriginalColorChips.com Reb

You use them to walk on wet epoxy while you spread colored flakes. The epoxy will flow back into the hole left by the spike as you walk away.

Sent you an email Reb

Here is the deal. I just finished laying my floor so I have no use for the spiked shoes for a long time I hope. I will give them to anyone who wants them for just the postage. I am in Fort Worth so I think the most for Priority Mail will be $10.60. ( To Seattle , Wa ). The deal is that when you...

I was talking to the Devoe Tech guy and mentioned that I need to get some spike shoes to help me spread the flakes around. He told me not to as Devoe 244 is not self leveling. The holes will just stay and allow water to enter. He told me just to do smaller sections that I could throw the flakes...

A gate for the privacy fence. Reb

The wife wants me to look into building a sliding gate for the shop instead of a swinging one. I have looked on the internet but do find much help in how to get a 7 foot privacy gate to work. Any one have one out there with some pictures??? Is there a good site to explain how to build one that...

How about a C5 Corvette and a used Altima. You sould be able to do that for around 35K. After all, you do not haul the kids around all of the time. :) Reb

No I was talking about the ground wire. Thanks guys. Reb

I will be running my electircal in EMC. One conduit will contain more than one circuit. Can the two circuits share a common ground wire or do I need to run a separate ground for each circuit???? Reb

If the vapor barrier is only under the floor and not the footings, how about I run the wire down the rebar in the footings. Reb

I did ask him if it would work with the vapor barrier and he said that according to the code, it would. Just have some doubts. Reb

They will be pouring the slab for my shop soon and I am working with the inspector as I will be doing my own electrical. He suggested to me to do a Ufer ground instead of driving in rods. He told me to get 20 feet of #4 stranded copper and tie it to the re-bar and turn one end up through the...

I am going to have a new meter installed on my new metal building. Question is, how do most people attach the meter base and connection pole to the metal building. Do you use some kind of strap to go around one of the vertical poles?? Is just tying the box to the upright enough or do I also need...