Search results

Thanks guys. Reb

I did not know that I could just run romex from the main to the other end of the house and then go to individual wires. Isn't romex that large rather a ***** to bend!? or do they make a stranded romex for applications like this. Reb

Ok I am going to run the wires for my sub panel in the new shop from the house. To get to the shop I will have to run the wires from one end of the house to the other and then down and buried to the shop. The length will be about 110'. In the attic, there will have to be multiple bends in the...

Re: Advice needed : Best tire Changer to buy I just bought a John Bean 8950 changer and a John Bean 8.6 balancer for $750. The balancer was in great shape but the changer was a little rough. Cleaned up good and spent about $60 on a hose, tire tool, and some balance weights. They still have...

The power steering fluid WILL break down over time and absorb water, just like you brake fluid does. When this happens, if the fluid gets hot, it will have a lower boiling point and will boil. This will release gas and cause the system to jerk. On the track at MSR in the vette it happened to...

What ever happened to the guy that one the contest? Did he get his floor coating?? Is he happy with it???

I have a 2" coming out of the ground. Do I get a reducer to go to this box?? What size do I run from that box to the panel? Does it have to go all the way to the panel or can I run the loose wires to the box with them just supported??

Is the clutch peddle hard and you can not push it down? Is the clutch peddle realllllll easy to push?? Is the slave mounted external to the bell housing where you can take it off and see if when you press the clutch, the slave moves or is it internal to the bell housing and a huge pain to get...

I would like some details I have 2" pvc run from the shop to the house. I need to pierce a brick wall to get to the panel in the garage. Surely you do not pierce the brick wall with a 2" hole and then try to connect that up to the panel in the garage. How do you get it to the panel. I will be...

I am just starting to plan out my wiring for my new shop. This is a question on the best way to run the wires for a three way switch in conduit. By door one, there will be one box with 3 three way switches. ( one for half the lights in the shop, one for the other half of the lights and one for...

Damn people. They were trying to do some of us a favor and you get pissed. It is just amazing that you feel they owe you ANTHING. If I were them and saw this much bitching and moaning, I would just cancel the contest. They are going to sell enough of these with or without you. Why put up with...

Now it's just going straight to the form itself; same results. I've got other stuff I have to do... :lol_hitti

Same Error

I have always used Aero Kroil. Is that the same thing as Kroil. Orange and white spray can. Reb

I noticed in the pictures with the Corvette that it looks like you are lifting it with out using jacking pucks, just the pads on the arms. Is this correct or do you have a special pad that goes in the slots on the frame??? Thanks Reb

I will be putting up a metal garage bldg. about 50 feet from my house. Is it OK to use the same buried conduit to carry the power along with an Ethernet cable and a phone line??? If so, how do you get the Ethernet and phone lines in the conduit? Do you just drill a hole in the conduit and then...