Search results

Another work FREEBIE! Stor-Loc 11 drawers, measures 29 1/2" x 27". I had to practically rearrange my entire garage to make it fit, but I wasn't going to turn it down. This thing is built better than my Snap on box, and much heavier.

I bet your machine wasn't $200 either. I havent been a paid welder for years, so it won't see a bunch of use, but I still miss TIG welding from time to time.

Yes, there is no green wire, just an old white wire and two blacks.

Here is the wiring spec from the back of the welder. You tell me. It looks like 50 amps is all thats required, the manual said 60.

That's not a bad idea.

Thank you all for your help. I dont know when this was installed, it was there when I moved in and I haven't done anything with it except plug my stuff in. I do know that the main panel is literally on the opposite side of this wall, so the feeder is probably less than 6' long if that makes...

I believe it is 4 AWG.

Please explain how you would do that on this subpanel that only has one bus bar and only 3 leads and no separate ground on the supply line?

At the last house we lived in, there was an above ground pool. We tried to use the pool but it kept tripping the breaker. After a storm, the pool collapsed. When we finally removed the pool, I found regular Romex wire laying directly under the pool, not in the ground, and it was spliced with...

The picture below is the subpanel in my attached garage (im fully aware it is ugly and you pros are looking at it in horror). It is currently wired into my main panel via a 60 Amp breaker. The only things running off of this subpanel are my air compressor, drill press, a heater, and one single...

Picked this Thermal Arc 300 GTS with torch, leads and pedal for $200 I was also given a 3d Printer at work. It is a Prusa, who makes some of the best desktop 3d printers you can get.

Delete wrong thread.

It is an attached garage.

So I did find a manual online, and there are different sub-models that run on different voltages, and phases. The problem is, I couldn't find that sub-model number anywhere on the machine. However, the only model that lists 208, 230, and 460, is the model that can indeed run on single phase, so...

I like those alot. I really like the contrast with those handles.

That's what I thought too, but want to make sure.

I am interested in purchasing this 300GTS Tig welder from.a guy at work. I know some can run in single phase as well as three phase, but some can only run in three phase. Can anybody tell by looking at this if it can run in single phase?

Had pretty good luck yesterday. First stop, I picked up a 24" and 18" Ridgid, and a 14" Craftsman pipe wrenches. Paid $6. And $1 for these unknown branded electrcian crimper/cutters. I think the Ridgids will make good restoration candidates. Second stop I picked up this new in sealed box...

Picked up this Stihl RE90 electric pressure washer. I have been wanting one that was easier to use and quiet compared to my gas powered ones, and this one matches my other toys.

Delete. darkzero beat me to it.