Search results

I just put in 2 Clopay 9208 doors. 12X14 each. Without the doors my fully insulated garage was just as hot as outside (this was within the last couple of months so it's been pretty hot mostly). When they came to put the doors in, the manufacture only sent one door so the installation company...

Thanks!

So my current dual run capacitor is 70-10uF +- 10% 370VAC 50/60hZ Looking online I can get a 70-5uF or 7.5 370VAC The 10uF's seem harder to come by. So I guess the general question is...is it OK to use a lower MFD?

I found this on the APA website. The shape of my T&G looks like the one on the right for 1/16 inch.

Here is my portable Kennedy box. I keep essential tools for working on general car maintenance.

At my work we sell propane heaters and some electric heaters like those but they are very strictly rated for outdoor only. Not sure you are going to find one for those type of heaters.

Im putting 1 1/8" T&G over my steal joists. Joists are placed every 2 foot. Im securing the subfloor using Simpson stronge tie TB1475s screws specifically for wood to steel. Plus Im leaving 1/16" gap between each sheet (I saw that recomendation elseware). Total size is 800sf. Question is should...

Loaded up the F350 and hauled down 28 sheets of 1-1/8” T&G for my mezzanine. Ok...I hired some day laborers to do the heavy lifting. :beer: Finally got a pic of a couple of my cars in the garage.

Cream cultivator. I have one...minus the seat. I'm still trying to figure out what to do with it.

Save on cost but kind of wish I didn't. I ended up pulling a couple of the metal studs and putting in wood to make it stronger for the workbench.

My shop is 40X60X20. Just in the beginning phases of getting the inside setup. As I am doing most of my work at night getting some basic lighting up quickly was necessary. I have a about 10" wide girts running at about 7'6" all around the inside. I took some 4' LED lights and laid them upside...

For various reasons I’ve had a rather large pile of trash sitting outside my new garage for a while. So I decided to put some of the wood that came with the building when it was delivered to good use. A **** load of big wood that I figure I could make my first workbench out of. Put some vintage...

Is it at all possible for you to take a picture of the inside of the lower locking door. I want to build my missing piece

Can you explain this a little more. My new shop has plenty of spiders in it already.

So it sounds like I did mine all wrong. My building is 60X40. My panel is on one corner of the 60' wall. I ran 12/2 from the panel, down 60' then along the 40' section with a bunch of outlets in between. Sound like I should redo at least the 60' section to 10/2.

We used to own a place out in the country and love to go out "pickin" at garage sales. This one guy basically had a hardware store setup in his garage. He said he picked up most of it when a local-ish hardware store went out of business. I asked if he was willing to sell me some of his storage...

Perfect. These pictures and info are exactly what I needed. I just emailed the person on the craigslist add to see if they could send me some pictures of how the door opens and rolls back so I can make one. Awesome info!

Looks like 1957

:beer:

I'm thinking about just cleaning it up instead of a full resto. Also get/make any missing parts to get it fully functioning again. I really like the used look of it.