Search results

  1. C

    Sump pump battery backup - AGM or Lithium?

    Hello, Getting close to sump pump season around here. Although with the amount of snow we've got, it might be a shorter season than usual. Checking on the backup battery and acid level (level ok) , I noticed its been a while since its been replaced - mfg date 2011. I recall testing last...
  2. C

    Is this Husky 46'' box worth it?

    Its a deal as far as I'm concerned. Bought 2 of them about 5 years ago (I think on sale for $400 each) , they are holding up nicely. I never lock them so no keys would be a non issue for me
  3. C

    Building a 12x16 shed

    Hi, I echo the comments from the previous replies. Go 16" oc stud spacing, so the sheathing edges always land on a stud, make sure to account for the first stud when starting out, and the last stud will be spaced a bit different as mentioned. Also go 8' high on the walls. If you made it...
  4. C

    Dangit. Mice droppings all over the garage

    there were some good threads on the topic in the last few months. My fave is still the wooden traps with PB on them.
  5. C

    Cheapest way to insulate a wood framed shop?

    +1 on bats. They are effective, easy DIY and go in quickly. For cutting the 24" bats in half to get your 12", use a serrated bread knife and make a jig with plywood so you dont have to measure each one. You will be surprised how fast it goes.
  6. C

    Layout

    Yeah I realized that quickly after I posted, and edited my response - you beat me to it....
  7. C

    Layout

    Stairs across back wall (in the garage part) seems to make the most sense. Takes up room but you can use the space under the stairs for whatever.
  8. C

    Porch Framing Question

    sure did, must have skimmed over that. saw the bolt to concrete remark and in my head thought the posts could be relocated
  9. C

    Is there a point wiring sub 2hp engines as 220v?

    I wonder when the bots will start flaming each other on a thread and get banned
  10. C

    Porch Framing Question

    I can't answer whether the splices would be acceptable. Here they would probably not with a 2 ply beam, mainly due to snow load. Are you set on 10' span? Adding two more posts will allow you to use 16' material, with all splices landing on (each alternating) posts. There would be a bit more...
  11. C

    No shut off valves for outside water faucets

    Yes, the hose has to be disconnected from the tap, even with the frost-free spigots. They must be able to drain downstream from the valve to prevent freeze damage.
  12. C

    No shut off valves for outside water faucets

    For me, that is something I would add to the project list when its warmer. Frost free valves and shutoffs. Sure it hasnt frozen in 60 years (or at least enough for the PO to change it), but I think its rolling the dice in colder climates...
  13. C

    My crazy, year long furnace problem (and solution!)

    Some really good feedback, thanks for the replies. About whether the intake has been tested for CO draw (good idea), I don't know if that was part of their combustion tests but as you say I doubt it. I am off tomorrow, so I plan to scope the vent lines to check for obstructions. I did find...
  14. C

    Safe Heat for Enclosed Storage Area

    I would look at radiant floor heating. likely not as efficient as planning it in slab with insulation, and with it being a partial area. But, should be one of the safer options available.
  15. C

    My crazy, year long furnace problem (and solution!)

    For the folks who mentioned venting - I removed the furnace door yesterday so the fresh air intake can come from the furnace room, just to see how it would run. Well it runs fine, no short cycling whatsoever when the door is off. There is a fresh air intake in the furnace room that vents...
  16. C

    My crazy, year long furnace problem (and solution!)

    Yeah this was not an acceptable solution when the techs did it late last winter as a last ditch effort. They said they would come back and install 3" and terminate it past the deck, like it originally was. My fault for not keeping up on it and getting them back out to finish it.
  17. C

    My crazy, year long furnace problem (and solution!)

    Thanks for the reply. Yes the techs ran every test they had, including draft and combustion tests. I've been away for a few days but plan to try running it with the furnace door off (so it pulls air from the basement instead of outside) to see if this improves it or not. I know that did not...
  18. C

    Protecting generator from rain/snow during use

    I sit an old piece of plywood on top, and clamp it to the handles that are attached to the generator frame
  19. C

    My crazy, year long furnace problem (and solution!)

    Update: new furnace is back to short cycling. Been happening the last few months. Time to start saving and buy a Lennox or whatever else is good these days.
  20. C

    What's the good 1500w garage heater?

    Depending on the size of your garage and how well its insulated, you may get away with less wattage. I have 3 baseboards in my garage totalling 3250 watts, which is perfect for my ~500 sqft in the dead of winter.
Top Bottom