Search results

I thought I had found a motor but it didn’t work out so I’m reposting. Looking for a Delta single phase ¾ or 1 HP motor. 1725 RPM. Delta 8-1/2 or NEMA 182 frame. ¾ or 7/8 shaft. Dual voltage and 60 Hz. Thanks Ric

Looking for a Delta single phase ¾ or 1 HP motor. 1725 RPM. 8-1/2 or NEMA 182 frame. ¾ or 7/8 shaft. Dual voltage and 60 Hz. Thanks Rick

I am offering up a Delta 17” VS drill press – model 17-600. Serial number 1445038 manufactured in 1967. The Good All parts are present and accounted for Machine has been completely disassembled and all parts were cleaned/blasted and painted. ¾ HP 3 phase dual voltage Delta motor with a VFD and...

I am working on a vintage Brown Bruckmeyer motor. It cam to me a switch box clumsily mount to the end bell and the stator wires taped together from the stator to the switch box. The switch and switch box are a Westinghouse product The stator wires exit the stator through a standard hole...

I have a brand new in box Wynn dust collection air filter that is excess to my needs. This is an American made product. Not much more to say. It has a $279 retail value plus shipping. I am offering it at a 20% discount - $225 plus shipping. It is a 18 X 18 x 26 box weighing 20 pounds. Local...

Good morning - I am having a general electric motor badge being reproduced but it was/is in bad shape. Most of the data has been enhanced on the attached photo. Two things I am missing are the lubrication instructions on the bottom and the color layout. I'm wondering if anybody has one of...

Good morning - I am looking for folks who have some experience with the Delta VS Reeves drive on a 17" drill press. I am trying to solve a noise problem but have some questions about the reeves drive design differences, installation and tuning. This seems to be a somewhat rare machine in terms...

I have this Reliance Electric Reeves drive that is excess to my needs. It is identified as a Reeves J.R. Pulley and has a model number of 415-107-45-AG. Pulley halves are 7” – not sure what the angle of the pulleys is. It is all steel and has a 7/8” bore. It has been disassembled, cleaned and...

BOTH UNITS SOLD I have two WNY Phase Converter MAC 5 units that are excess to me. These are static phase converter units and are rated for ¾ to 5 HP. Both have been successfully tested on a 1 HP and 5 HP motor. They each started and ran the motors. These units appear new/never used and they...

I have a spare Delta reeves drive for the motor side of a 15” drill press. The drill press is gone so this drive is now excess. It has been disassembled, cleaned and reassembled. It has the standard 5/8” bore. There is a small crack in one of the support fins on the lower fixed pulley (see last...

DRILL PRESS HAS BEEN SOLD I am tired of fooling with drill presses so I would like to move this one along in its “as is” state. It is a project for someone who would like to do the restore - no work has been done to it with the exception of disassembly for transport. As far as I can tell all...

I live in central NC so power outages due to weather are somewhat unusual. I have thought about a whole house generator (like a generac) but the cost doesn't seem to be justified. So I am considering a portable generator. In a perfect world we would like to power kitchen circuits, bedroom...

Not sure where this may belong - please feel free to move if necessary Sorry for the long post - I am working on 3/4 HP, 3 phase, 1750 RPM, 2.8 FLA, dual voltage Delta motor. To date I have disassembled, cleaned, painted and replaced bearings. The motor came to me with no spacers or spring...

STARTER IS SOLD Furnas Manual Motor Starter – Price Reduction. This needs to move along so I am reposting with a 30% price reduction - $125 shipped to the lower 48. Up for sale is a Furnas 11DB3B manual motor starter. It is a size M1 which can be wired for single or three phase applications...

Up for sale is a Furnas 11DB3B manual motor starter. It is a size M1 which can be wired for single or three phase applications. It has a capability of starting up to 3 HP single phase motors and 7-1/2 HP 3 phase motors. It uses H heaters which are readily available. It currently has H29 heaters...

THIS ITEM IS SOLD I am relisting this item with updated information. For sale is an Allen Bradley 509 magnetic starter – model BAD. This is a NEMA size 1 in a type 1 enclosure. It is capable of both single and three phase usage. The control circuit has a 120 volt coil for operator safety A...

I'm coming to the tool gurus - I have a lathe spindle that uses a spanner as a bearing retainer I have been thinking I need a face spanner wrench but the one I bought doesn't work. The spanner holes are so close to the spindle shaft that the adjustable spanner wrench can't close up enough to...

REEVES DRIVE HAS BEEN LOCATED I'm looking for a Reeves drive for the motor side of a Delta 17" VS drill press from 1967. I can use either the 3/4" bore (preferred) or the 7/8" bore. Part numbers are 41-964 for the 3/4" bore and 41-965 for the 7/8" bore. Parts schematic below. Appreciate any...

ITEM HAS BEEN SOLD New Price = $175 and I'll pay the first $25 of shipping Following is a testimonial for an OWWM member "Hi Rick, I used the Gizco for the first time in shop class (1964) It was the neatest thing for sure. Made tapered legs & long dowels. It worked VERY well and was extremely...

SCROLL SAW HAS BEEN SOLD I need the space so this project needs to move along. It is a Delta 24” scroll saw with a welded stand. It is a variable speed machine with all the parts for the variable speed, crankcase and standard plunger parts. Table and trunions are included as well. The motor is...