Search results

  1. S

    Inspection Cameras

    What are y’all using for inspection cameras? I am looking for the best value camera on the market, price is no object is the quality is there. Clear photos/video are what I need, ability to record is a plus, but not needed. Preferably a case included, but could also store in an Apache case.
  2. S

    High Amp Battery Charger

    Hi all - Looking for a high amperage battery charger, 80-100 amps. Anyone have recommendions? I see chargers like this Link, but it seems this has a 175 amp engine start/jump start feature, but only charges at 25amps. I would like to have the ability to put this on a bank of 1-3 8D sized...
  3. S

    Air Tank

    I know this is a bit of an open ended question, but how long would a 7 gallon air tank last when being used with a blow gun? I occasionally have the need to take a compressor onto a boat, usually to try and blow out a mucked up condensing coil or condensate drain. Anyway, saw the 7 gallon...
  4. S

    Matco Witte Drivers

    Are all of the Matco Top Torque screwdrivers made by Witte? I have the set like in the first photo below, and they are far and above my favorite drivers, so have been looking to buy a second/backup set. Looking at the Matco site and scouring eBay for a set, seems the handle design has changed...
  5. S

    Service Vans?

    Do service vans and the tools inside count here? I cleaned up my van a bit this afternoon, probably the cleanest it has been in a while, so took a few pics. I just added the blue harbor freight side chest, previously was a second refrigerant rack there and a packout drawer unit in front of it...
  6. S

    Antenna Tester

    I am really not sure this belongs in the tool forum, or what… but this is a multifaceted question. First, I work on boats. Get a decent amount of calls that relate to VHFs, not transmitting or receiving well, typically the complaint is both. I have a Shakespeare SWR tester, but honestly don’t...
  7. S

    Socket Trade/Sales

    Wasn't there a socket trade/give away thread on here somewhere at some point? Trying to find it, but not having much luck. Looking for a few odds and ends sockets, I would like to browse/ask if anyone has them sitting around they'd be willing to part with. If not, can I post that type of...
  8. S

    Channelock GLS-3 Pliers

    Anyone have any first hand experience with this style channellock pliers? I have plenty of Knipex, but trying to put together a kit for only marine sanitation (toilet/plumbing/holding tank) jobs. Main use would be rebuilding vacuflush vacuum generators (replacing duckbill valves) and other...
  9. S

    Veto Bags

    If you don't own any Veto bags, I suggest you don't buy one... Otherwise you'll be tempted to buy more! :ROFLMAO: Have been wanting to buy a Tech LC for a while, as a compliment to my Tech XL, but have been waiting for the spring promo (going on now, for those who may not know). Luckily the...
  10. S

    Megapro Ratcheting Screwdriver?

    Is the Megapro Ratcheting drive gone forever? Out of stock everywhere, eBay has them listed for hundreds... I didn't even realize Megapro made NON ratcheting drivers, ordered one last week and was disappointed upon arrival... Klein 32305 looks very similar to the Megapro, may try that one...
  11. S

    Mobile Socket Rails

    Not my idea, saw someone else mention it on Facebook… At any rate, I picked up a TEQ pro socket set a few weeks back (posted in the NTD thread) at the Advance Auto clearance, mainly for the 1/4” deep sockets, went in my shop tool box, the rest of the sockets got put into this “general tool bag”...
  12. S

    Craftsman Pliers

    Just out of curiosity, more than anything... What was the general consensus on these older, US made, Craftsman pliers? This is one of the older tools I own, my parents got me this set for Christmas sometime in high school, probably around 20ish years old. As primarily a 'knipex guy' now...
  13. S

    Day Saving Tools

    I carry a few tools in the truck that I don't use often, but when I need to get them out, its because I couldn't have done it any other way! Today, my Bosch angle driver and Vessel screwdriver saved the day. I was mounting some LED lights (terrible lights, customer purchased them...) under a...
  14. S

    Handle Dip

    A few weeks back, I posted in the new tools thread, about picking up a new set of Klein crimpers and cable cutters to replace my old ones. Old ones still work great, so will just put them in the backup box/bag in the event I lose mine, or I plan to eventually have a shop (rather than being...
  15. S

    My Sanctuary

    Sitting here in the shop/garage, browsing the internet on the shop PC. The place is an absolute wreck as I have just been swamped for months, I haven't done any wood working at all, hardly any fishing, but sitting here on my stool, looking around at the tools I have ammassed, thinking about...
  16. S

    Makita Impact Socket Sets

    Anyone else, other than Makita, make a set like this? Would prefer sockets in chrome, as I am not intending to use them on an impact driver, just like the rubber holder for my mobile bag, and for what I do (marine electrical) these seem to handle 90% of what I need. I have a set in my big bag...
  17. S

    Craftsman/Facom Tools

    Haven't seen it discussed here, but looks like SBD is bringing (or already has, though, I haven't seen them in store) a Craftsman version of Facom tools to Lowes, assuming to bring an 'upper tier' to the Craftsman line. Being branded as the V Series. Look interesting, price seems decent. Would...
  18. S

    (Portable) Wrench Set

    Hi all - I am in the market for a portable wrench set, preferebly using the packout system, though I know Milwaukee doesn't make a Packout set. I do electrical and A/C work on boats, so portability is a must. I currently have a cheap Kobalt wrench set in Ernst style trays, but the wrenches...
  19. S

    Portable Air Hose Reel

    What are you guys using, if anything? I found this Husky reel, and looks like exactly what I would like, but I can't find it (or anything similar) for sale. I am a woodworker, mostly work in the shop, but occasionally out "in the field" so would be nice to have something to tote some line...
  20. S

    US General 27" box

    Anyone know anything about this? In their ads, but cannot find it online. Wondering if you can get just the bottom box, I'd have no need (or space) for the top box. Alternatively, anyone know of a similar box out there? I don't like the 4 drawer boxes, just seems like you'd end up with a...
Top Bottom