Search results

A while back I picked up a Kalamazoo KB7 7” abrasive chop saw. Cast iron construction, 75 lbs, built like a tank, 1hp Baldor motor, Material Capacity: 1″ solid round (mild steel), 2″ pipe (mild steel). I have other saws for bigger stuff. The documentation calls out to use non-reinforced...

FS: Vintage Craftsman logo badge for tool box or vise Mounting holes are 2.75” apart canter to center $15 + shipping, US sales only

Need some crank handle for a project? I am selling two Delta Rockwell table saw hand wheels. These came from an older tilting arbor table saw. Did not have a data plate so not sure of the model. The hand wheels are 4” in diameter with a 1/2” diameter bore and a 0.14” wide cross slot. I see the...

Hubbell 20A 120VAC twist lock plugs 8 for $20 plus shipping Hubble part number: HBL2311 New old stock, boxes are a bit beat up but plugs are fi e US sales only

I just was given an older Vidmar tool box, similar to the one shown in the photo. It is in reasonable shape with some rust on the bottom feet from spending the last decade in not-so-sealed shipping container outside. Eventually this will end up in the garage or possibly the house on carpet. But...

FS: Baldor Grinder eye shields, 2 for $35 used condition, came with a Baldor grinder I used to own. Shields are 4x6 inches. Note that the Plastic shields have some damage and scratches, but should be usable. note the bracket types. 2 for $35 + shipping US sales only Payment via Papal

For those who were able to buy one or more of the $79 Durham LIC-243644-2-95 Low Profile Instrument Cart, what are you doing with it? For reference: https://www.amazon.com/dp/B07M819QH8?tag=atomicindus08-20 This is my project for the cart: I do not like messy tools like bench grinders...

FS: used Baldor 6" bench grinder guard cover - SOLD - P/N Baldor G6FH3801 or Baldor G6FH3801BG - Grey in color - Fits on left or right side $15 + shipping (US sales only)

Even with new LED work lights in the shop, found seeing scribe marks on material when using my vertical bandsaw a pain. I looked around at a lot of options that would provide lots of light in a compact package that could be far from the workpiece. The first requirement was due to a lot of light...

Drill press column mounted chip tray home made project The standard drill press table on my old Rockwell 15" drill press had a bunch of holes and slots for mounting vises. This always resulted in most of my drilled chips ending up on the floor much to my annoyance. I wanted to attach a cheap...

FS: Vintage 1958 Craftsman 1/2HP drill press motor parts Motor ran fine in spite of the crunchy bearings but I needed the unobtainium capacitor for my Craftsman drill press. Parts A-J are $11 per batch (as designated by the letter label) plus shipping. Rotor K is $16 + shipping. US sales only...

In case some one has not seen this https://www.kvise.com/

I had the day off today and spotted a "Made in Canada" intermediary tool chest forsale. The seller identified it as made for Craftsman, but it has no Craftsman identification on it. I also went thru my Craftsman catalog collection and did not see an equivalent from 1970-2010. Being "Made in...

Years back I purchased way too many Craftsman rebranded pry bars when Sears was blowing them out. I do use them but disliked how much tool box drawer space they consumed. Hanging them in a rack was the obvious solution. The prime location was attached to a storage rack high above my workbench. I...

I am only posting this for posterity. Well…. and my long suffering spouse also requested it be posted in hopes one of you all will buy it before I can rationalize the purchase…

I am a fan of used 80's vintage Snap-On tool chests as they fit well at work and are really well built. I picked up this KR650 top chest and am in the process of cleaning it up. The ball bearing drawer slides are extremely dirty and greasy. Also one set is damaged and needs to be replaced. I...

Years ago there was a vintage Snap-on tool box maintenance manual on an album on the Garage Journal that I had linked to on some old postings from 2019. The link no longer works and waybackmachine.com did not archive it. I am not sure if this was deleted or rendered inoperable with a software...

Saw this on the Los Angeles area Craigslist. Supposedly it came out of the Schecter guitar shop in the 1980s. Looks to be a 3/4hp Baldor grinder with small rubber contact wheels on either end. The dual 2x48 belts have screw driven independent belt tracking. The long spring tension arms allow for...

- Sold pending funds - Cleaning the garage miscellaneous Snap On tools 17 pieces for $17 some rust and owners marks you pay shipping, USPS priority mail flat rate box is probably cheapest. US sales only this is the 9/32” drive stuff. I am including A Plomb wf-9 T handle also included for...

When I picked up a Parker Union bench vise years back, it was missing the wrench that tightens the clamping mechanism for the swivel base. I did some research and found that Williams made wrenches that could work as a replacement. I was able to find the size I needed on eBay.