Search results

OK, I will will play.... I have been thinking about a similar system, but to control my one compressor. I suggest that you start with controlling a single compressor with a vfd and if you can get that to run it will be easy to expand it to control multiple compressors. I recommend using an...

They work fine I'm using one on each side of the after cooler Been running them for over 15 years now

Better yet sell it to me, and I can drive to Ks and pick it up!! Is it the model 260 above?

What model did you get ? Is it one of the SS models? does it have the 1/2hp Tsurumi Pump in it? if so how reliable is the pump?

So here are a few examples of the cabinets I'm looking at The one from above is the actual machine I bid on the winner of the sealed bid shipped it to PA from Iowa and then sold it later for $5k! As you can see it's machine F-003 I have been hopping that machines f-001 and f-002 would be sold...

The design choice of 12 gauge comes from the class of cabinets I'm looking to copy. The one I bid on is the model I really want to own/copy and it has 12 gauge upper and 10 gauge lower in the sump. The material thickness is not really for strength but rather for abrasion resistance. My bead...

I The stuff I have I think is hot rolled but I have had it over 30 years so I don't remember for sure. I built my bead blast cab a long time ago but I had to pay for it to be bent as I didn't have a press brake then. I Here is the start of the plan

So I have been looking at one of these machines for a few years and now I have decided that I need to own one.... Seems like they are a great metal refinish machine. The only problem with them is the cost of a true quality machine! A medium sized machine seem to be $10k and up! So in my...

I couldn't agree more! Rent don't buy the lift (this is from someone who owns 2 lifts). You probably will not need a slab lift for much after you get finished with the building inside, if you get a off road lift you might be able to use it outside for other things, but an articulated lift is...

My new (to me) dishwasher. Thought it was 3 phase but when I got there its single phase, probably got bid up because of that.... Now I have to figure out where to put it! Oh yeah part # 112

Both of them are, the black and the gray.

I don't think the steel head is removable. Why can't you just choke up on the other hammer that comes the way you want it? I have both handle styles and you can choke up on either

So I guess that I forgot to mention what the tool cabinet is storing. It came with about 3000lbs of Wilson wt press brake punches and dies. So I now have additional capabilities to bend metal! I got slightly over 8' of 50mm, 40mm and 16mm 86 degree dies, and 8+' of the 60 degree dies. Also...

Yes I did today, but they didn't know much about the cabinets ( the thing was sold in the US by Wilson tool ). But I figured that they didn't make them. Wilson said they would try and figure it out and get back with me. Thanks for that I was having problems with the ole search when I started...

My new to me tooling cabinet Only problem is one of the pulls is broken But I can't figure out who made the pulls. Any idea who's the logo belong to?

1@30hp, 2@20hp, 2@10hp, [email protected], 5@5hp, + a bunch more smaller motors all running 480v 3 phase

It's the big brother of yours, a model 390. I "think" it was roc 14 if I remember correctly, if it matters I will look at the tag for you. I replaced the bushing, and had the machine shop hone it to around 7 tenths clearance. I also replaced the pin and the piston. I think there is a slight...

The big end of mine was not damaged but the small end was just slightly worn!

How is the quality of the chuck? There is a place for it in my screwdriver set, and I was thinking about getting one, but it has the hex drill bits in it.

Well I "needed" some punches and I guess I could also use a few chisels. I have been looking at the Snap-on sets for years but never found a set for the right price and that I needed more than some other tools. Only problem now is that they have a companion set..... Might have to wait...