2017 Epstein's Day?

[StillTooManyHobbies]

SK 3/8 in 1/4 body should be 45173. They call it a slim 3/8.

 

[M_George]

Thanks! I'd not previously seen that on HJE's website. But I had found something like that on Amazon, and I'd decided against it. I was looking for larger pockets, all about the same size, with a flap that comes down to keep the tools in. And the other tool roll was exactly what I was looking for.

Now I need to find a canvas tool roll for my miniature screwdriver set. They are all the same size and there are 14 of them. I may convince my wife to sew one for me. I want to organize the small screwdrivers in my traveling tool bag.

Check with HJE, maybe they can get their neighbor Callie Brinton to make you a custom tool roll. She makes them for the store.

 

[Carquest]

Order 100011826 my first Epstein Day Order


Sent from my iPad using Tapatalk

 

[Daveyclimber]

Yes! If you qualify for a t-shirt please let us know your shirt size in the comments section.

If you are checking out with PayPal, you will have to send us an email: [email protected], as you won't be able to leave a comment with your order.

Yes, had this issue with order 100011712. Website was ultra slow all night, waited up and made the order at 10pm Pacific time. Took 24 minutes to process the order which was already in my cart. I sent an email referencing my shirt size.

 

[Duck tape Bill]

Just put my order in # 100011829.

Hope everyone is having a great 4th.

 

[Fedwrench]

I got the body clip set as well from sk... I hope it is nice.

Are you talking about the kit with the adjustable head trim clip pry bar? I got it when it first came out a couple of years ago. it's pretty sweet for wheel well splashshield fasteners. I also like the SK push thru trim tool. it looks like a green screwdriver handle with a pin on one end and a small pry bar on the other end. great for those push pin type fasteners found on so many late model Asian cars.

 

[48548]

Are you talking about the kit with the adjustable head trim clip pry bar? I got it when it first came out a couple of years ago. it's pretty sweet for wheel well splashshield fasteners. I also like the SK push thru trim tool. it looks like a green screwdriver handle with a pin on one end and a small pry bar on the other end. great for those push pin type fasteners found on so many late model Asian cars.[emoji106]

That is the one....

 

[LXCam]

What's the part number for sk ratchet 3/8 drive in 1/4 body?


Sent from my iPad using Tapatalk

SK 3/8 in 1/4 body should be 45173. They call it a slim 3/8.

I didn't know SK had one of those too. I've always wanted one and finally ordered this one today

Wright Tool #3430 3/8" Drive 4-3/4" Compact Ratchet

Had I known SK offered one, I might have gotten it instead. Does anyone here have input as too which one might be better?

 

[walrus]

My order just went in 100011841

Sent from my SM-G950U using Tapatalk

 

[ogorir]

Just spent too much money Happy Epstein's day!
Order: 100011843
8" SPECIAL MILLED CURVED BODY FILE W/ CURVED TEETH #5339
6" SWISS PATTERN #0 COARSE WARRENSVILLE EQUALING FILE
6" HALF ROUND SWISS PATTERN WARRENSVILLE #4 FINE FILE
12 PIECE WARRENSVILLE 6 1/4" SWISS PATTERN #0 COARSE NEEDLE FILE SET
8" HALF ROUND SECOND CUT NICHOLSON USA FILE
15" WRIGHT SATIN FINISH ADJUSTABLE WRENCH
#80200 SK 3/8" DRIVE 90 TOOTH 8" TEARDROP LOW PROFILE LP90 RATCHET
80049 SK X-FRAME FRACTIONAL RATCHETING WRENCH SET
1/2" DRIVE IMPACT UNIVERSAL JOINT
WILDE 7MM HOLLOW SHAFT NUTDRIVER
HUSKY TACK PULLER
KRAFT TOOL 4" X 13" ALUMINUM FLOAT
4" GOODELL FLEX TAPE KNIFE
10" ROUND SECOND CUT NICHOLSON USA FILE
6" ROUND SMOOTH CUT USA NICHOLSON FILE
COMPANION #2 PHILLIPS SCREWDRIVER
SK ANGLE WRENCH SET USA
SK SUREGRIP EXTERNAL CONVERTIBLE RETAINING RING PLIERS W/ 8PCS TIP SET

 

[rustynutz]

Got my order in! Overspent a bit, but I'll be putting it to use right away. Added a lot to the wishlist too. Ready for the next holiday!

 

[priceman1414]

Order was placed this morning. Managed to avoid over spending.

I wonder if anyone will get the 'random item' Jori reserved the right to throw in...



My dad had me order him some stuff and he agreed to help pay for shipping.

 

[Southernbuild]

Let the waiting, (and order additions), began.

Glad to be part of the event this year.

 

[Tellingthem]

Order #100011857 I had to get one of those pry bar racks. They look pretty sweet.

 

[Jawn]

I wonder if anyone will get the 'random item' Jori reserved the right to throw in...

I said I like random things... who knows, we'll see.

 

[Rickster55]

If my math is right (or close to being right), it looks like approx. 150 orders so far! Let's keep it going. Still have tonight and then a little more time!

 

[tmcowboy]

Order #100011864, glad to buy American on the fourth of July.

 

[nahudson]

I placed an order as well!

 

[dutchgray]

Order # 100011822
Couple SK ratchets and some closeout stuff, $300 with the shipping.

 

[pstemari]

SK pear head and a set of stubby offset metric DBEs. I wish SK had a bigger selection of DBEs: I prefer DBEs+DOEs to combination wrenches.

Sent from my Pixel XL using Tapatalk

 

[kcaz507]

Order in - #100011850
Companion 8 Piece Pin/Alignment Punch Set
22 oz USA All Steel Rip Hammer
KASTAR Combination Tune Up Gauge
2" Goodell Flex Tape Knife x2
4" Goodell Flex Tape Knife x2
Grace 8 oz Brass Hammer
1 lb Brass Hammer (Second)
4 oz Brass Hammer, name removed
Omaha Tool 4oz. Warrington Pin Hammer
Husky Tack Puller

 

[vertguy]

Placed my order first thing yesterday and managed to exhibit a bit more restraint this year. But I always enjoy supporting these US companies... especially HJE!

 

[Super Sport]

I didn't know SK had one of those too. I've always wanted one and finally ordered this one today

Wright Tool #3430 3/8" Drive 4-3/4" Compact Ratchet

Had I known SK offered one, I might have gotten it instead. Does anyone here have input as too which one might be better?

I can't comment on the SK, but the Wright is excellent. You won't regret it!

I almost bought the 3440 flex head model this year, but put it off for now.

 

[rustynutz]

SK pear head and a set of stubby offset metric DBEs. I wish SK had a bigger selection of DBEs: I prefer DBEs+DOEs to combination wrenches.

Sent from my Pixel XL using Tapatalk

I agree 100%. I would love it if they had more DBE options. I ordered the same set you just did as well. If they can make an extra long DBE with a fixed box on one end and ratcheting on the other I'd buy it in a heartbeat.

 

[nes999]

I placed my order yesterday and forgot to add a tool. I emailed you guys.

Thanks for another awesome Epsteins day.

I would also like to remind the group to support HJE during the other times of the year too.

Sent from my VS988 using Tapatalk

 

[LXCam]

I can't comment on the SK, but the Wright is excellent. You won't regret it!

I almost bought the 3440 flex head model this year, but put it off for now.

Thanks SS. I ended up checking out the reviews on amazon and am looking forwards to getting my crimmy hands (errr fingers maybe) on my new addition.

 

[-Brent-]

After watching this thread and seeing the site's inventory numbers adjust, throughout, I'm thinking this has to be a pretty good day for SK, too.

 

[R_einan]

I agree 100%. I would love it if they had more DBE options. I ordered the same set you just did as well. If they can make an extra long DBE with a fixed box on one end and ratcheting on the other I'd buy it in a heartbeat.

If SK made a long pattern DBE, with their ratcheting end on one side I would be in big trouble with my wife...

I ordered one of the new SK 90 tooth to check out. I'm super excited to get it in my hands and give it a whirl. If it is as good as everyone has said I will probably order a 1/2" dr in both flex and non-flex to replace my favorite snap-on 71-15.

 

[NoahG]

Got my order in today, #100011877. Totally over spent but what else is money for.


Sent from my iPhone using Tapatalk

 

[FlushingDIYer]

I agree 100%. I would love it if they had more DBE options. I ordered the same set you just did as well. If they can make an extra long DBE with a fixed box on one end and ratcheting on the other I'd buy it in a heartbeat.

Absolutely. I can't believe in all this time SK hasn't thought to make the zero degree extra long box end... There's got to be a market for them...

 

[Biomed]

Sure wish you would sell GRAY shirts with just the SK logo on the front and nothing on the back. I might even buy some HJE shirts with nothing on the back.

 

[48548]

How did the sales look for yesterday?

 

[LB-1911]

How did the sales look for yesterday?

I would estimate around 150 or 160 orders came in on the 4th. More still coming though.

Average order was much larger than last year, and orders are still coming in, so for us, better than previous year.

There were about 170 orders for a total of around $35,000 in sales, which is the highest sales for Epstein's Day ever.

Also a record amount of box art requests: 100.

Think we have about 20 orders left to process.

2012 - 154

2013 - 150+

2014 - 200+

2015 - 120+

2016 - 241

2017 - 170 m/l

http://www.garagejournal.com/forum/showpost.php?p=5859345&postcount=373
http://www.garagejournal.com/forum/showpost.php?p=5843949&postcount=312

 

[-Brent-]

Until Jori checks in - You'll have to go w/ this.

It could be much higher than that. It may have to do with how you paid, I'm thinking.

This morning I placed another order because I forgot an item I wanted. That order was 100011744. It took me by surprise because I had see higher numbers posted by members, previously.

 

[48548]

Nice, i spent more than i wanted.....

 

[72highboy]

I'm 100011701

Sent from my Nexus 6P using Tapatalk

 

[jakemac]

I'm 100011701

Sent from my Nexus 6P using Tapatalk

NCC-1701 Enterprise

 

[Jarhead0408]

NCC-1701 Enterprise

The original Constitution Class no less... (prior to the refit).

 

[48548]

The original Constitution Class no less... (prior to the refit). [emoji38]_hitti

I actually preferred the refit, it looked better. 1701-A

 

[Jarhead0408]

I actually preferred the refit, it looked better. 1701-A

I do too. I wish the -B and -C had gotten more play.