2017 HD deals/sales/clearance thread

[Mjolner]

Bosch T4 Miter Saw Stand $150 on clearance from $299.99

I stopped in at the Cherry Hill, NJ HD today to see if this had become a clearance item.
There were none in the miter saw stand display area on the floor. I asked one of the workers who told me that if it was not in the display area they did not have it. He checked his phone and said that the item is not carried in stores.

I told him that they have two in the overhead rack that I could clearly see. After they went up in the lift and confirmed what I had told them, they punched the sku into the phone and said that it was on clearance and that the price was $150. They were then very helpful in getting it down, assisting me through the cash register and loading it into my car. After military discount $135.

I've been watching this for awhile as they were reported as being on clearance in Florida on another board. I noticed that over the last couple of weeks, when I would check the inventory online for my local stores all had 2-4 of these in stock, then suddenly a store would be listed as not carrying this item. Yesterday, the HD website indicated that it is not carried at any store, which is why I went in today.

 

[volunteers]

That's good to know.
All stores around me still snow 'available to pick up'. So I have to wait for a while.

Bosch T4 Miter Saw Stand $150 on clearance from $299.99

I stopped in at the Cherry Hill, NJ HD today to see if this had become a clearance item.
There were none in the miter saw stand display area on the floor. I asked one of the workers who told me that if it was not in the display area they did not have it. He checked his phone and said that the item is not carried in stores.

I told him that they have two in the overhead rack that I could clearly see. After they went up in the lift and confirmed what I had told them, they punched the sku into the phone and said that it was on clearance and that the price was $150. They were then very helpful in getting it down, assisting me through the cash register and loading it into my car. After military discount $135.

I've been watching this for awhile as they were reported as being on clearance in Florida on another board. I noticed that over the last couple of weeks, when I would check the inventory online for my local stores all had 2-4 of these in stock, then suddenly a store would be listed as not carrying this item. Yesterday, the HD website indicated that it is not carried at any store, which is why I went in today.

 

[tool.hunter]

oil free means no oil to resettle...

Apology meant to say the internal lubricant as they are pre lubed.

You may want to stand upright for a day or so in order for the internal lubricant to re-disperse.


Sent from my iPhone using Tapatalk

 

[tool.hunter]

That's why I said I had no knowledge. I wasn't sure if "oil free" meant what it sounds like, or if it just meant it was sealed, and you don't have to maintain the supply.

Sealed equal less maintenance. Good for home use, for commercial or long running applications oiled filled compressors are better, as they run cooler and oil can be added or exchanged as needed.

Sealed (oil free) compressor can have the lubricant break down over time causing wear on internal parts.

Now for those that say oil free is fine you maybe right but it will depend on application and how long you want to own it.


Sent from my iPhone using Tapatalk

 

[DanielSimpsonDay]

Sealed equal less maintenance. Good for home use, for commercial or long running applications oiled filled compressors are better, as they run cooler and oil can be added or exchanged as needed.

Sealed (oil free) compressor can have the lubricant break down over time causing wear on internal parts.

Now for those that say oil free is fine you maybe right but it will depend on application and how long you want to own it.


Sent from my iPhone using Tapatalk

Also oil less are much louder than oil lube.

 

[jdmallday1090]

Does anyone know if the 46" husky will come down lower than 200$ if they aren't sold over the weekend?

 

[DanielSimpsonDay]

Does anyone know if the 46" husky will come down lower than 200$ if they aren't sold over the weekend?

Other than .02/.04/.03/.06 items, don't try to read into any HD pricing. Even the .06, etc. pricing, sometimes those will do weird things including going back up to regular price.

The pricing isn't logical at times and guessing where it will go is a guess. You can always buy it, don't open it, then wait and see where the pricing goes.

 

[jdmallday1090]

Okay I'm going to pick one up, anyone else have one? Just curious of the quality compared to my harbor freight 56" that I love

 

[derkperk]

Saw a pile of these


Sent from my iPhone using Tapatalk

 

[idriveahonda]

Okay I'm going to pick one up, anyone else have one? Just curious of the quality compared to my harbor freight 56" that I love

It's a pretty solid unit. Only thing that got me was the 52" mobile bench didn't come with drawer liners.

I have both the 52" 13-drawer chest/cabinet, as well as the 52" 11-drawer mobile bench, and very happy. Especially for the prices you can find around holidays!

 

[a52-830]

Does anyone know if the 46" husky will come down lower than 200$ if they aren't sold over the weekend?

my store has about 10 of them in the rafters, so unless they want to own them forever, i imagine they will . . .

 

[archirelic]

Does anyone know if the 46" husky will come down lower than 200$ if they aren't sold over the weekend?

Doubtful. These are a core SKU and carried year-round. The pricing for spring black friday is just that...a sale price. They move these at their regular price of 299 quite well, so unless they plan on discontinuing the item, the price will go back up after their sale.

 

[drwheels]

Husky 3 piece insulated screwdriver pennied this a.m.

 

[95m3ltw]

Husky branded Keter tool box dropped in my store. Still a few around the Atlanta area, bought one, like it.

 

[LS6]

Okay I'm going to pick one up, anyone else have one? Just curious of the quality compared to my harbor freight 56" that I love

http://www.garagejournal.com/forum/showthread.php?t=202997

Im on the fence, spend a little more on the HF or go for the sale price

 

[Hip2u77]

Anyone have an extra Ridgid 18v trim router? I would trade for one of the Bosch 18v 4 1/2" angle grinders.

 

[justthefastest]

Anyone have an extra Ridgid 18v trim router? I would trade for one of the Bosch 18v 4 1/2" angle grinders.

Not sure what price point you had in mind but I've seen them at one of the Twin Cities stores for $60 in the past two weeks. I don't need the grinder, but I can try to track one down if you're interested and want to pay shipping.

 

[Hip2u77]

Anyone have an extra Ridgid 18v trim router? I would trade for one of the Bosch 18v 4 1/2" angle grinders.

Not sure what price point you had in mind but I've seen them at one of the Twin Cities stores for $60 in the past two weeks. I don't need the grinder, but I can try to track one down if you're interested and want to pay shipping.

OK, thanks. That's what they were going for around my area, so the price is good, but all the stores are sold out, except one; which still has 23, but they're still holding firm at $119. If I don't have any luck trading I'll get with you.

 

[tywever]

1001257215 $75.02 52 in 10-drawer mobile workcenter

Found 2 in the rafters after seeing the price on the PCA. I assume an employee got the other one. Must be discontinued old stock as I couldnt find it on the website after I got home.

 

[Sil40sK]

Found about 5 or 6 Square D 60amp transfer switchs for $27.03 at the Brighton, Mi store. Item # 785901824343. Good for properly connecting a generator to your house.

 

[pajibson]

Found about 5 or 6 Square D 60amp transfer switchs for $27.03 at the Brighton, Mi store. Item # 785901824343. Good for properly connecting a generator to your house.

Thanks for the tip. I have to head throught there this weekend. Hope one is still there

Sent from my SM-N920P using Tapatalk

 

[Ccjung]

1001257215 $75.02 52 in 10-drawer mobile workcenter

Found 2 in the rafters after seeing the price on the PCA. I assume an employee got the other one. Must be discontinued old stock as I couldnt find it on the website after I got home.

Any odds of a picture of the box to help locate? This is a voodoo item at my local and PCA shows 1 in stock. I know its likely a phantom, but knowing what to look for helps.

Thanks in Advance!

 

[csmitty]

Found about 5 or 6 Square D 60amp transfer switchs for $27.03 at the Brighton, Mi store. Item # 785901824343. Good for properly connecting a generator to your house.

Have a SKU#? I assume this is one with dedicated circuits.

 

[auferret]

Have a SKU#? I assume this is one with dedicated circuits.

Plugging the upc into the HD site brings up this one. SKU 311215
http://www.homedepot.com/p/Square-D...or-QO48M60DSGP/100096290?keyword=785901824343

 

[Ijhursh]

Saw a pile of these


Sent from my iPhone using Tapatalk

V2 or V1?


Sent from my iPhone using Tapatalk

 

[bargainhuntingking]

I need a workbench ASAP. The 8' adjustable Gladiator with a maple top is $412. Anyone seen a better deal on this? If it periodically goes on sale at a good discount I can wait for it.

It's 1 inch wider and the top is 1/2 thicker than the Husky version, which is $62 cheaper, so I still think Gladiator is a better product.

 

[Ign]

I need a workbench ASAP. The 8' adjustable Gladiator with a maple top is $412. Anyone seen a better deal on this?

http://www.homedepot.com/p/Gladiato...ench-in-Hammered-Granite-GAWB08MTZG/204246906

It's 1 inch wider and the top is 1/2 thicker than the Husky version, which is $62 cheaper, so I still the Gladiator is a better product.

http://www.homedepot.com/p/HUSKY-8-ft-Solid-Wood-Top-Workbench-G9600-US1/207131346?

Damn I'd have a hard time giving $400 for that. I'd probably hit up CL & Habitat for an old solid core door first

Does it have to be 8' long? I'd also sooner get the Husky 60"x24" workbench/toolbox for $700.

But no, I have not personally seen either of your prospects, sorry.

edit: here's a write-up on the 60" Husky. Almost surely made by the same place as the Milwaukee 60", but the Husky is a true 24" deep while the Milwaukee is 22" deep.
http://toolguyd.com/husky-60-inch-10-drawer-mega-mobile-workbench/

 

[wait4me]

Yeah, I mean, I know its smaller but the seville classics workbench from Sams is 72" x 25" and only $200. I could get 2 of those for cheaper than that gladiator bench.

 

[555]

http://www.homedepot.com/p/Husky-46...-with-Solid-Wood-Top-Black-7440946R/206839475

I was just at the Douglasville, GA store and they had several in stock.

 

[bargainhuntingking]

Wait4me, I like the Seville UltraHD commercial work bench but it's not adjustable height and while it's probably stronger with the center leg, it's a foot shorter than the 8' Gladiator. I like that I could slide my 52" adjustable height Husky box/workbench underneath the open space of the 8' Gladiator, and also store other carts under there.

IGN, I like that Husky 60"x24" but I don't need another mobile toolbox at this time. That being said, I really like the Husky 52" adjustable adjustable height workbench box, and may eventually get another. I like the possibility of using the two benches as "sawhorses" to hold longer projects if need be. But I also like being able to sit at the bench with a stool and have space for my legs. The mobile boxes don't allow for this, but then again they provide storage. There are many tradeoffs to each choice.

I totally get your economical point about getting a used door and building my own bench, but I don't have time to build my own bench out of wood/salvaged materials right now. If I did, I'd probably go with BDbecker's **** Shack workbench design. My indoor desks are simple doors painted white straddling two 2 drawer file cabinets. That's worked fine for me for the past 25 years.

 

[derkperk]

V2 or V1?


Sent from my iPhone using Tapatalk

You know, I didn't look that close. Wasn't much interested in the item, just thought someone here might be. Found at the Hudson, WI store.


Sent from my iPhone using Tapatalk

 

[Bzrollin]

V2 or V1?


Sent from my iPhone using Tapatalk

They're V1. And they've been this price in my area forever.

 

[madmath]

Sent from my iPhone using Tapatalk

 

[Supergumby5000]

I need a workbench ASAP. The 8' adjustable Gladiator with a maple top is $412. Anyone seen a better deal on this? If it periodically goes on sale at a good discount I can wait for it.

It's 1 inch wider and the top is 1/2 thicker than the Husky version, which is $62 cheaper, so I still think Gladiator is a better product.

I havent seen the gladiator workbenches on sale very frequently. They seem to hold their prices pretty well until they get clearanced or discontinued.

I scrounged up a pair of 6ft benches at $275/ea, and that was 50% off. At sears.

 

[Sky Chief]

M18 FUEL 18-Volt 16-Gauge Angled Finish Nailer Kit $259 at Home Depot:

http://www.homedepot.com/p/Milwauke...-Angled-Finish-Nailer-Kit-2742-21CT/206862848

 

[drwheels]

Nice winter gloves went to a penny with a $9.88 price still showing.

 

[madmath]

Sent from my iPhone using Tapatalk

 

[gumme]

Nice winter gloves went to a penny with a $9.88 price still showing.

What kind of glove....nice winter glove
was 9.98 now a penny... well that's nice
sure narrows things down now doesn't it....Luv your posts!

 

[Winter]

Nice $3 gloves, all sizes

These, post 1646 for Pic and SKU

 

[Sh40674]

home depot deal of the day.. good deal on a milwaukee kit... wish coupons were available. still a good price

http://www.homedepot.com/SpecialBuy/SpecialBuyOfTheDay