2018 Home Depot Clearance Thread

[maksim]

Re: 2018 Home Depot Clearance Thead

Got several bottles of the Zep drain cleaner for 1.83 and 2 of the dewalt multi tools for $6. Some bundy wire connectors are at .03 price now. Most stores have them in the electrical section, not the clearance section. The mother load today was the Mass Air Flow Sensor cleaner, that was clearanced out months ago. I got 4 cans then for $2 but today I found a case of cans sitting where the Lucas gallon heavy duty oil stabilizer jugs normally are. Someone must have found a new case up high and put them on the shelf. I price checked one and it was .80! I swooped up all 12!

oh, and I also got the multi cut tool for a penny today.

Thanks, will have to take a look!

 

[evercl92]

Re: 2018 Home Depot Clearance Thead

Ridgid X4 18v recip saw 0000-323-251 marked down from $120 to $60

 

[maksim]

Re: 2018 Home Depot Clearance Thead

Ridgid X4 18v recip saw 0000-323-251 marked down from $120 to $60

Saw that, not in all stores. My local one does have 3 of them marked down to $84 or so, but rings up $60. Let me know if you need a lead on them in central NJ.

 

[txusa03]

Re: 2018 Home Depot Clearance Thead

Have not been in HD for a while. Is this an error? I thought regular price was $499.

 

[fourjeepin]

Re: 2018 Home Depot Clearance Thead

Ridgid X4 18v recip saw 0000-323-251 marked down from $120 to $60

X4? Didn’t the X5 come out 2 years ago?

 

[Blue 04 Z71]

Re: 2018 Home Depot Clearance Thead

Have not been in HD for a while. Is this an error? I thought regular price was $499.

That’s a decent price. Black Friday pricing was close to that.

 

[Kenta]

Re: 2018 Home Depot Clearance Thead

Ecobee3 WiFi thermostats down to 63.0

At my local store the PCA said 1 in stock @ $63. Rummaged around the clearance sections, no luck. Went to the checkout and then they looked in the "cage" where they keep the rest of the expensive thermostats, not there either! Anyone find one and, was it in the cage or out in the clearance sections?

 

[Mctiger1985]

Re: 2018 Home Depot Clearance Thead

At my local store the PCA said 1 in stock @ $63. Rummaged around the clearance sections, no luck. Went to the checkout and then they looked in the "cage" where they keep the rest of the expensive thermostats, not there either! Anyone find one and, was it in the cage or out in the clearance sections?

Did you look up high in the aisle with the regular thermostats?

 

[fourjeepin]

Re: 2018 Home Depot Clearance Thead

At my local store the PCA said 1 in stock @ $63. Rummaged around the clearance sections, no luck. Went to the checkout and then they looked in the "cage" where they keep the rest of the expensive thermostats, not there either! Anyone find one and, was it in the cage or out in the clearance sections?

I only look for something with inv of 1 if it is big and expensive..

 

[drwheels]

Re: 2018 Home Depot Clearance Thead

Bare Milwaukee sawsall went to $125. 60 inch lawnmower blades at $15.03.Oregon bars and chains at 06 pricing.

 

[chadman117]

Re: 2018 Home Depot Clearance Thead

Echo weed whackers and trimmers have been 06 for months, hopefully they'll get put out of their misery soon and go 03.

 

[Mctiger1985]

Re: 2018 Home Depot Clearance Thead

I only look for something with inv of 1 if it is big and expensive..

Nice, would have missed out on these 3 bags I found lol

 

[2manytools]

Re: 2018 Home Depot Clearance Thead

Have not been in HD for a while. Is this an error? I thought regular price was $499.

$499 is way too much. $299 i think is MSRP, which doesn't make sense either, as the large is $129, medium is $80, and the small car is $70 retail I think.

$200 was the BF (or whenever) price they had when it was briefly in stores. Never last long enough to go to a regular price, if it was very programmed in.

 

[Mctiger1985]

Re: 2018 Home Depot Clearance Thead

$499 is way too much. $299 i think is MSRP, which doesn't make sense either, as the large is $129, medium is $80, and the small car is $70 retail I think.

$200 was the BF (or whenever) price they had when it was briefly in stores. Never last long enough to go to a regular price, if it was very programmed in.

$499 is the kit that includes the drills I believe

 

[BeardBro]

Re: 2018 Home Depot Clearance Thead

Echo weed whackers and trimmers have been 06 for months, hopefully they'll get put out of their misery soon and go 03.

I thought that seemed odd. There are a few items I want that have been stuck there for months. Have you seen .06 items drop after being held at that level for an extended time?

 

[06GMC5.3L]

Re: 2018 Home Depot Clearance Thead

Nice, would have missed out on these 3 bags I found lol

Those oversuds and cause my dishwasher to leak.

 

[schmelpboy]

Re: 2018 Home Depot Clearance Thead

Those oversuds and cause my dishwasher to leak.

Same here. 70 cents cost me a 1,000 deductible and 2 weeks of aggravation while I couldn't use my kitchen and basement.

Sent from my SM-G955U using Tapatalk

 

[12three]

Re: 2018 Home Depot Clearance Thead

X4? Didn’t the X5 come out 2 years ago?

x4 is old. theres multiple x5s i believe, and one of those even has a brushed motor.
$60 is pretty steep for it. but ridgid is the only cordless option with an orbital feature tho...
i might grab one at .03 but im sure it will be gone before then

 

[06GMC5.3L]

Re: 2018 Home Depot Clearance Thead

Same here. 70 cents cost me a 1,000 deductible and 2 weeks of aggravation while I couldn't use my kitchen and basement.

Sent from my SM-G955U using Tapatalk

Mine would just leak a little bit out the front of the tub from behind the door then it would pool on the floor. It wouldn't happen all the time either. Took it all apart a few times and couldn't figure it out. Finally tried a powder only pod and haven't had any problems since.

 

[12three]

Re: 2018 Home Depot Clearance Thead

Sent from my iPhone using Tapatalk

in pca this shows some light included but the light was nowhere to be found in one package i found... same sku but no light

 

[Mctiger1985]

Re: 2018 Home Depot Clearance Thead

in pca this shows some light included but the light was nowhere to be found in one package i found... same sku but no light

The light kit is a promotion package. 2796-22P.

 

[Hexen]

Re: 2018 Home Depot Clearance Thead

Those oversuds and cause my dishwasher to leak.

Same here. 70 cents cost me a 1,000 deductible and 2 weeks of aggravation while I couldn't use my kitchen and basement.

Sent from my SM-G955U using Tapatalk

Wow, same thing happened to 2 people who happened to be following this thread, what are the odds? Sounds like Cascade Platinum has some issues!

My family has been using 'Finish' tabs for years with no issues, FWIW.

 

[schmelpboy]

Re: 2018 Home Depot Clearance Thead

Probably pretty good considering it's a clearance item for a reason.

Wow, same thing happened to 2 people who happened to be following this thread, what are the odds? Sounds like Cascade Platinum has some issues!

My family has been using 'Finish' tabs for years with no issues, FWIW.

Sent from my SM-G955U using Tapatalk

 

[bmoore1]

Re: 2018 Home Depot Clearance Thead

Let there be light

Sent from my Pixel XL using Tapatalk

 

[bmoore1]

Re: 2018 Home Depot Clearance Thead

Let there be light

Sent from my Pixel XL using Tapatalk

 

[emachado]

Re: 2018 Home Depot Clearance Thead

Let there be light

Sent from my Pixel XL using Tapatalk

I need like 30 leds! Will check
Here


Sent from my iPhone using Tapatalk

 

[bmoore1]

Re: 2018 Home Depot Clearance Thead

Let there be light #3

Sent from my Pixel XL using Tapatalk

 

[bmoore1]

Re: 2018 Home Depot Clearance Thead

Let there be light #4

Sent from my Pixel XL using Tapatalk

 

[bmoore1]

Re: 2018 Home Depot Clearance Thead

Let there be light #5

Sent from my Pixel XL using Tapatalk

 

[bmoore1]

Re: 2018 Home Depot Clearance Thead

Let there be light #6

Sent from my Pixel XL using Tapatalk

 

[yosh2000]

Re: 2018 Home Depot Clearance Thead

Let there be a better deal than crappy lightbulbs #1

 

[JR4815D2]

Re: 2018 Home Depot Clearance Thead

If anyone is looking for a basic obdii reader.

Sent from my SM-G955U using Tapatalk

 

[L.Cheapo]

Re: 2018 Home Depot Clearance Thead

Those oversuds and cause my dishwasher to leak.

They don't taste nearly as good as Tide Pods either.

 

[woodturner9]

Re: 2018 Home Depot Clearance Thead

If anyone is looking for a basic obdii reader.

That appears to be a full featured tool, from the description:
The AL519 supports all 10 modes of OBD-II
Record and playback data
Graph live data

 

[Hexen]

Re: 2018 Home Depot Clearance Thead

If anyone is looking for a basic obdii reader.

That appears to be a full featured tool, from the description:
The AL519 supports all 10 modes of OBD-II
Record and playback data
Graph live data

Yeah, that is a very nice-sounding tool. Excellent reviews on Amazon, where it costs 2.5x as much:
Autel AL519 AutoLink Enhanced OBD ll Scan Tool with Mode 6 Fault Code Reader EOBD
https://www.amazon.com/dp/B007XE5LTG/?tag=atomicindus08-20

 

[csmitty]

Re: 2018 Home Depot Clearance Thead

Same one can be had from HF with a 20% but probably still a little more. Can't say I've ever seen one of these in a HD.

 

[woodturner9]

Re: 2018 Home Depot Clearance Thead

Same one can be had from HF with a 20% but probably still a little more.

Do you have a link for this scanner on the HF site? I could not find it, all I could find were the Zurichs and a high end Autel tablet.

Thanks.

 

[06GMC5.3L]

Re: 2018 Home Depot Clearance Thead

Do you have a link for this scanner on the HF site? I could not find it, all I could find were the Zurichs and a high end Autel tablet.

Thanks.

Yes, those are them. They are "equivalent".

 

[woodturner9]

Re: 2018 Home Depot Clearance Thead

Yes, those are them. They are "equivalent".

Hmm, I only found four and none of them had the same buttons as this one. Guess I will need to read the descriptions to find the equivalent one.

 

[06GMC5.3L]

Re: 2018 Home Depot Clearance Thead

Hmm, I only found four and none of them had the same buttons as this one. Guess I will need to read the descriptions to find the equivalent one.

What type of vehicle are you mainly looking to use it for? GM, Ford, etc?