To avoid these ads, REGISTER NOW!

Above 1200 Sq/FT 86's 20HP shop

Wokspaces above 1200 squarefeet.

bulletpruf

Well-known member
Joined
Nov 28, 2013
Messages
10,967
Location
San Antonio
I've got Father's day earmarked for a new grill. The old one is in very sad shape.

Last few grills that I have picked up have been lightly used gas grills that I got for free or close to it. We'll eventually upgrade to a nice new one, but the $25 one that we've been using for the past 5 years refuses to die.
 
To avoid these ads, REGISTER NOW!

SilverJimmy

Well-known member
Joined
Apr 14, 2012
Messages
1,629
Location
Prescott/Flagstaff, AZ
My wife finally put her foot down about a bad habit I have…
When I go to the dump there’s always a couple BBQ’s tossed into the pile that haven’t been crushed and buried. Most only need about $10.00 in parts and a good degreasing to be back into working order. She pointed out I don’t need more than a couple, not 10!
 
OP
8

86turbodsl

Well-known member
Joined
Jul 1, 2005
Messages
6,556
Location
Michigan
All of these suggestions get me a grill that's like i already have...

The side burner and automatic ignitor don't work. The main grill works, but the sheetmetal is crunched up. And it's too big.
I envisioned having more people over for grilling, but reality is everybody is busy all the time and we never have anybody over. I need a smaller grill that's fully functional.
 
OP
8

86turbodsl

Well-known member
Joined
Jul 1, 2005
Messages
6,556
Location
Michigan
So far this week, i've managed to get the special arm for the forklift welded up.

20230520_204557.jpg
2023-05-25-12-52-11-836.jpg

I quenched the weld many times during the welding, trying to keep the splines from reaching draw back temperatures. We don't need a repeat of last time. And this part will have reduced loading on it due to the changes i'm making to the steering. More on that later.


Yesterday, i worked with my machinist to get this part made, a part i designed to replace the problem connection on the intake manifold runner valve on the Audi.
2023-05-22-14-25-12-786.jpg
2023-05-25-12-58-04-129.jpg

This part will be inserted into the end of the plastic valve, and i will be drilling and tapping holes in both parts, with button head capscrews holding the part onto the valve. Locktited of course.
 

Attachments

  • 2023-05-25-12-54-17-872.jpg
    2023-05-25-12-54-17-872.jpg
    267.6 KB · Views: 5
OP
8

86turbodsl

Well-known member
Joined
Jul 1, 2005
Messages
6,556
Location
Michigan
Today i'm off to spend the day with mom. She's 80 and i'm going to get some projects done around the house for her birthday. Don't need any falling off ladder action today.

Tomorrow i'm going to pickup a new purchase. It'll be an all day deal, but i'll try and post pics during the trip.
 

bulletpruf

Well-known member
Joined
Nov 28, 2013
Messages
10,967
Location
San Antonio
Today i'm off to spend the day with mom. She's 80 and i'm going to get some projects done around the house for her birthday. Don't need any falling off ladder action today.

Tomorrow i'm going to pickup a new purchase. It'll be an all day deal, but i'll try and post pics during the trip.

What is this "new purchase" that you speak of?
 
OP
8

86turbodsl

Well-known member
Joined
Jul 1, 2005
Messages
6,556
Location
Michigan
It took all day, but here we go....

2023-05-27-17-14-05-588.jpg

This little guy was in Illinois, where it seems all my purchases are lately.

Woods 6215, 61" cut. Kubota D722. Runs great. Some of the mechanicals are a bit questionable, in much the same sense as most of the hack garden tractor repair people tend to be. Hey, we don't need no stinkin' crimp terminal, what is a crimp terminal anyway? Wire nut it is! I think this one came off the stove... (rolls eyes) I am well tooled and capable of these types of small repairs.

Anyway, i was spending a lot of time on the M&W mower, realized that the starter wasn't coming off without pulling the engine, broke about half the rotten bolts off INSIDE the engine case, and it snowballed from there. The grass is growing furiously, and i needed a mower. I started looking for grasshoppers and woods front deck machines, quickly saw the high price tags, after all, it is the middle of mowing season. this one turned up on fakebook marketplace at a not stomach-turning price, i called the guy and he dropped it 500 more. Since i had been looking for a mower to diesel-swap for several years, and nothing really turning up, i coughed up the cash and drove 270 miles to get this guy.

The yard was starting to look quite shabby, as the bushog on the Oliver was the only other mower that could get the job done. My kid mows most of the time and he's terrified of hitting something near my stuff, so i have a sea of tall grass and i can't stand it anymore. Also, I am tired of having to wrench endlessly on old broken **** or having a giant project to get something done. So i got off my wallet.

I'm sitting at my workstation now, putting together a full service order. I will have to attend to the tires, they are pretty shot. Other than that and a couple little things that are easy fixes, i drove it around the yard and down the driveway after i got it off the trailer. Hydros seem pretty good. About 1500 hrs on the clock. I've heard hydros last at least ~2000hrs if you take care of them, and i have a pair of low hour spares in the 5180 i picked up a few years ago as an engine swap candidate. Now i don't have to do that, and i can concentrate on other things of more interest.

The fact that i can fuel up the mower at the bulk tank without going to town and i can get off the rec-fuel treadmill which i DESPISE is all icing on the cake. Our nearest rec fuel is about 17 miles away from here. OR i can fill jugs, treat with stabil and hope for the best. I hate that. Most of my small engines have to get cleaned out every 2-4 weeks because of **** fuel. Even my VMAX has problems after a couple weeks.

My kid put together this text to his mother after we picked it up in Illinois:

-----
On this week's edition of vice grip garage, we roll the dice with a 280,000 mile 97 Ford 350 dually with dry rotted, bald, weather checked, half flat tires in 80 degree heat in Chicago traffic on Chicago pothole roads. With no way to air them up. Perfect.

----

I didn't notice the tires had gotten that bad. Guess i better order some truck tires while i'm at it....
 
OP
8

86turbodsl

Well-known member
Joined
Jul 1, 2005
Messages
6,556
Location
Michigan
Tore into the mower. The drive wheels are the wrong offset, shoving the tires into the chassis. The tires are destroyed. Evaluating what options i have now. Spacers would need to be about 3" thick. No go. I have most of the service stuff on order. The truck tires are cheapest from Amazon believe it or not. I have too many projects....
 
OP
8

86turbodsl

Well-known member
Joined
Jul 1, 2005
Messages
6,556
Location
Michigan
Yes, it's the new mower. I have a line on a set of proper wheels. If not, backup plan is build wheels from a cheap set and what i have now. I also have taken apart the cooling system for flushing and how the hell does the radiator get bent, with perfect sheetmetal, and the radiator is buried inside it? The bottom tank of the radiator is freakishly bent. It doesn't leak, but it's crazy how bent it is!
 
OP
8

86turbodsl

Well-known member
Joined
Jul 1, 2005
Messages
6,556
Location
Michigan
Deck came with. 61" cut. The wheels are all wrong. Shove the tires into chassis. Spacers need to be like 3in. I'll remake wheels before I make spacers.
 
To avoid these ads, REGISTER NOW!
OP
8

86turbodsl

Well-known member
Joined
Jul 1, 2005
Messages
6,556
Location
Michigan
Here's the status of things:

The parts needed for the mower with exception of a radiator and wheels are in, i'm working to detail out the deck and fix small things on the main unit. Oil changes and service all around.

The wheels haven't heard anything on besides requesting my address. The radiator i ended up buying one for a dodge neon, which will have to get shortened. then fab a shroud. The original one had a giant bend on the bottom tank. Bent enough i don't feel confident in proper cooling without a shroud. Especially at slow speed. Soooo, i will be learning aluminum welding shortly.
Wanted to anyway.

The car, i haven't done much on since last week. I have some parts made for the intake. The suspension still needs to go back on. The shop is still a mess. It's frankly overwhelming. The forklift, i got the steering gear back on, and am ready to design and fab some cylinder brackets. I hope to get that done this week. What i'd like to do is get the mower done, get the yard mowed, and use the forklift to empty out the shop while we have no rain. Then move things to where they need to be, then reload with some sense of order. Note that's what i'd LIKE to do.
 
OP
8

86turbodsl

Well-known member
Joined
Jul 1, 2005
Messages
6,556
Location
Michigan
Yes, worked fantastic. This is the set i got. https://www.amazon.com/dp/B09F64XLCW/?tag=atomicindus08-20

The plug is back in after drain, and system refilled. Waiting on a couple more things and then it's done.

How did people get things done before all these specialty tools became available? The plug edges were quite rounded, so i am guessing pipe wrenches and replacements...
 

bulletpruf

Well-known member
Joined
Nov 28, 2013
Messages
10,967
Location
San Antonio
Yes, worked fantastic. This is the set i got. https://www.amazon.com/dp/B09F64XLCW/?tag=atomicindus08-20

The plug is back in after drain, and system refilled. Waiting on a couple more things and then it's done.

How did people get things done before all these specialty tools became available? The plug edges were quite rounded, so i am guessing pipe wrenches and replacements...

I recently purchased a set, too. Different brand but they look the same, also from Amazon. I'm guessing it's the same set, just re-branded.
 

ClappedOutBport

Well-known member
Joined
Mar 30, 2016
Messages
998
That factory makes a lot. I have the same stuff, but 1/2" drive impacts, 3/8 to like 1 1/4", and 10mm to 24mm. No skips. Extensions and a ratchet. Heavy set, cost me like $150. Pretty happy with it, I did have to remachine some smaller sizes due to the chamfers being too large. Didn't take me long.
 

bimmer1980

Well-known member
Joined
Feb 5, 2009
Messages
2,104
Location
York, PA
Good progress. Just an idea, but what about using longer wheel stud bolts, put on a stack of nuts or washers to space it out, then use your current wheels? You could also buy some pre-made tubes and use them as spaces on each stud. (Or cut short pieces of steel tubing if you have the correct size.). This would be an interim solution to the correct wheels, but at least it would get you out and mowing.

For some reason, I have a suspicion that the wheels are going to take a bit to get there..... The above solution would at least get the machine moving and allow for mowing and testing....
 
OP
8

86turbodsl

Well-known member
Joined
Jul 1, 2005
Messages
6,556
Location
Michigan
Good progress. Just an idea, but what about using longer wheel stud bolts, put on a stack of nuts or washers to space it out, then use your current wheels? You could also buy some pre-made tubes and use them as spaces on each stud. (Or cut short pieces of steel tubing if you have the correct size.). This would be an interim solution to the correct wheels, but at least it would get you out and mowing.

For some reason, I have a suspicion that the wheels are going to take a bit to get there..... The above solution would at least get the machine moving and allow for mowing and testing....
The studs are not long enough. I would need studs at least 6 inches long to get the existing wheels far enough out to not hit. The old tires had to be cut off, they are not usable. The new tires are not going on the old rims. There is a big difference in offset. They go from basically about centered on the ones i have, so about 4" offset, to 2" offset on correct rims. The guy had lug nuts UNDER the wheel, and lug nuts on top, and the threads were right at the edge of the nuts. The tire still hit.
 

bimmer1980

Well-known member
Joined
Feb 5, 2009
Messages
2,104
Location
York, PA
Two places I've had good luck with ordering hoses:

I had checked locally at the Parker Hose place and the Napa and they were way too expensive. I did about 12 hoses for the excavator from the two places above. Had to use a 90 angle swivel to add to their standard hoses, but that was fine.
 
To avoid these ads, REGISTER NOW!
Top Bottom