bigboost
Well-known member
Are these known to be good or something?
For another $5 there are what I'd consider much better options.
Or you can get a 4 pack at Harbor Freight with the same 400lb rating for $7.99
Amazon Deals on New Retail Items - Post them!
- Thread starter vwpieces
- Start date
For another $5 there are what I'd consider much better options.
Or you can get a 4 pack at Harbor Freight with the same 400lb rating for $7.99
JohnKal
Well-known member
Thanks Chingon! In for the boat flooring.
stillnostrebor
Well-known member
As am I. Thanks!
just a warning, upon closer inspection these don't seem to be simply rubber mats (for work-table duty) but EVA foam topped. Perfectly fine for boats but don't know how well it holds up to oil/grease/etc for tool box tops as I had suggested. I'll still get it and maybe line other surfaces w/less noxious use.
More volume than the previous one I posted;
the 880lb seems like a decent deal too:
the 880lb seems like a decent deal too:
volvo problem
Member
- Joined
- Sep 18, 2014
- Messages
- 18
I can not think of what I'd do with that boat flooring, but I feel like I should get some just in case I come up with something.
PugetDude
ALLIANCE MEMBER
The curse of the Garage Journal.
Agreed, I need drill bits like a hole in the head. Yet they're in the farkin cart...
line your special lady's cupboards w/it. Or not, it's Chinese foam after all.
stillnostrebor
Well-known member
I am planning to use it for something much closer to the intended use... someday... maybe.
I think I hit my limit. When I close my eyes I am going to see amazon listings.
$12 tap and die set
$8 grease gun
$20 for 300 feet 1/8" SS wire rope and cutter
~$20 paint sprayer
$25 juicer
$45 bar cabinet
$12 tap and die set
$8 grease gun
$20 for 300 feet 1/8" SS wire rope and cutter
~$20 paint sprayer
$25 juicer
$45 bar cabinet
in4 the mini grease gun w/free grease.
in4 the hi-pressure hose and space heater. I don't have a high pressure washer that goes that high but it's 100' of hi-P hose for 8$. I use space heaters as resistive loads sometimes. The diamond hole bits were tempting but looks like some ppl did not get the case and others did not get the circ. saw.
Can the pressure washer hose be used with typical pressure washer attachments? From the pics it looks like I'd have to use their jets unless there's an adapter that exists. I haven't had a pressure washer long enough to know enough about it.
Wiz02
Well-known member
After close to 30 years of disuse, I have lost all my analog and digital design and troubleshooting skills.
As cool as that scope is, I have too many projects to buy it in the hope that someday I will use it.
Wasatch
Member
Truer words have never been spoken.
I have bought all kinds of "stuff" that showed up on GJ Hot Deals. I seem to be unable to resist Knipex pliers...
I hope I actually use at least some of what I've bought.
I believe mine would work w/another one of the females included here but I was going more for chopping the hose up to suit length and crimping new fittings:
edit; for its intended purpose it should work as is by plugging into the pistol wand in my machine (and likely many others)
Last edited:
olytdi
Well-known member
Thanks OP -- ordered the crane scale. If you choose "other seller options" for the item, there's a listing for $25 but with $10 off coupon making it $15 and change with free shipping with prime.
darrowco
Well-known member
I was going to pass on it but my luggage scale maxed out last time I went to buy some scrap.
olytdi
Well-known member
I got tired of having to hold my dog in my arms to weigh him (total weight minus my weight) on a bathroom scale. Now I can just lift him from his harness with the scale.
this got here today. Solid deal and not that much pricier than the well received 33 pc HF mechanical set. Decent gift option imo.Was looking for a larger electric screwdriver but having needed to take apart a laptop a few weeks back, I'll take it:
just occurred to me that if the foam & glue is rugged enough, might work well as off-road vehicle floor liners.
If anyone is interested in that magnetic stirrer they have multiple listings. This one appears identical but has a $6 coupon. I saw so many instances of this happening. Kinda weird.
Limited-time deal: VEVOR Magnetic Stirrer, 0-2000 RPM Stir Plate with Adjustable Speed Knob, 3000mL Plate Stirrer Kit, Stir Bar Included https://www.amazon.com/dp/B0CW5ZXD2R?tag=atomicindus08-20
$4 hot tub mat
VEVOR 74 x 72 Inch Hot Tub Mat, Extra Large Inflatable Hot Tub Pad, Waterproof Slip-Proof Backing, Absorbent Spa Pool Ground Base Flooring Protector Mat Reusable Outdoor & Indoor, Also for Car Repair https://www.amazon.com/dp/B0CRTLKCTM?tag=atomicindus08-20
$20 4 bike rack
VEVOR 4 Bike Rack Garage Storage, Free Standing Gravity Wall Vertical Bike Stand, Sturdy Steel & Easy Assemble, For Road, MTB, and Hybrid Bicycles, Holds Up to 260 Lbs https://www.amazon.com/dp/B0CW34K9MM?tag=atomicindus08-20
I think there is a 2 bike for $10.
$11 7" snap ring pliers
VEVOR 4 Pcs Snap Ring Pliers Set - Heavy Duty 7-inch Internal/External Circlip Pliers Kit (Tip Diameter 0.07'') with Straight/Bent Jaw for Ring Remover Retaining - Storage Pouch Included https://www.amazon.com/dp/B0CDPH3KVG?tag=atomicindus08-20
Limited-time deal: VEVOR Magnetic Stirrer, 0-2000 RPM Stir Plate with Adjustable Speed Knob, 3000mL Plate Stirrer Kit, Stir Bar Included https://www.amazon.com/dp/B0CW5ZXD2R?tag=atomicindus08-20
$4 hot tub mat
VEVOR 74 x 72 Inch Hot Tub Mat, Extra Large Inflatable Hot Tub Pad, Waterproof Slip-Proof Backing, Absorbent Spa Pool Ground Base Flooring Protector Mat Reusable Outdoor & Indoor, Also for Car Repair https://www.amazon.com/dp/B0CRTLKCTM?tag=atomicindus08-20
$20 4 bike rack
VEVOR 4 Bike Rack Garage Storage, Free Standing Gravity Wall Vertical Bike Stand, Sturdy Steel & Easy Assemble, For Road, MTB, and Hybrid Bicycles, Holds Up to 260 Lbs https://www.amazon.com/dp/B0CW34K9MM?tag=atomicindus08-20
I think there is a 2 bike for $10.
$11 7" snap ring pliers
VEVOR 4 Pcs Snap Ring Pliers Set - Heavy Duty 7-inch Internal/External Circlip Pliers Kit (Tip Diameter 0.07'') with Straight/Bent Jaw for Ring Remover Retaining - Storage Pouch Included https://www.amazon.com/dp/B0CDPH3KVG?tag=atomicindus08-20
Found the same when I searched. At least 3 listing for the blue pocket hole jig. $20-76
Roll sound deadener price dropped with 20% off coupon. Coupon only deducts from One roll.
yeah, i've been searching the same item I come across on amazon for better deals (from vevor). I must've forgotten, good catch. They sell that jacuzzi mat for car garages too but smaller area for the price:
Last edited:
Jeff
Well-known member
DURATECH 24-Piece Impact Socket Set, 1/2" Drive Deep Impact Socket Set with 2pcs 1/2-Inch Hexagon Extension Bars, Metric ＆ SAE, Hard Case Included $27
Crescent 25 Piece 3/8" Drive Pass-Thru X6 Standard Spline Mechanics Tool Set - CX6PT25 $28
Kyoto Tool (KTC) BR2S-S Short Ratchet Handle $24
BOSCH BL2145 1-Piece 9/32 In. x 4-1/4 In. Fractional Jobber Black Oxide Drill Bit (various sizes) 67 cents
VEVOR Air Blower, 450W 0.6HP Inflatable Blower, Portable and Powerful Bounce House Blower, 1750Pa Commercial Air Blower Pump Fan, Used for Inflatable Bouncy Castle and Jump Slides, Yellow https://www.amazon.com/dp/B0B8CMCLWS?tag=atomicindus08-20
$24
I never used one of these for a bounce house but they tend to be pretty strong for blowing / cooling stuff. Mine was significantly smaller too.
$24
I never used one of these for a bounce house but they tend to be pretty strong for blowing / cooling stuff. Mine was significantly smaller too.
There's dozens of these things at this price point and ordinarily would shy away from wire ones because they sag w/heavy power tools but I think are ok for 12v drivers. I find myself wanting certain tools quickly accessible by the garage door and this one fits the bill I think plus it's modular. Pro-tip, if you want to avoid sag, look for one w/a sturdy upper shelf from which you can wire the bottom supports:
also came across this one that may work for people's toolboxes:
also came across this one that may work for people's toolboxes:
I keep buying side cutters. I have an actual use for them, but I currently have 3 of them still in their clamshell packages. I need help.
Camel just popped on these Bora sawhorses..
$109.98 Lowest price in a while
$109.98 Lowest price in a while
Wow. DeWalt chop saw is a cheapest it’s ever been by a mile. Grab one.
PugetDude
ALLIANCE MEMBER
I have had one of those for years. ... It's OK, a bit under powered, nothing to get really excited about. Mostly replaced it with an Evolution Cold Saw.
They are really hard to keep clean. It's like they soak up grease and oil and then it makes black marks on everything.
Says $60VEVOR Air Blower, 450W 0.6HP Inflatable Blower, Portable and Powerful Bounce House Blower, 1750Pa Commercial Air Blower Pump Fan, Used for Inflatable Bouncy Castle and Jump Slides, Yellow https://www.amazon.com/dp/B0B8CMCLWS?tag=atomicindus08-20
$24
I never used one of these for a bounce house but they tend to be pretty strong for blowing / cooling stuff. Mine was significantly smaller too.
