Amazon Deals on New Retail Items - Post them!

[E chassis BMW owner]

I was trying to see if they would go back down to $120 but jumped on it now before it starts to go back up.

Amazon.com

 

[Caa311]

I was trying to see if they would go back down to $120 but jumped on it now before it starts to go back up.

Amazon.com

I got a great deal on a set of those a few years ago. They are very nice. I only want to use them and my Ktc combo's.

 

[Chefjpd]

Metric / SAE is a deep state conspiracy to make you buy 2 sets of everything.

Pete

Goes back to the revolution.
Resist everything English.
Side of the road, nut sack sizes, weights and measures.
F the British.............

 

[Butters]

Metric / SAE is a deep state conspiracy to make you buy 2 sets of everything.

Pete

Don't fall for Big Socket's propaganda.

 

[fourjeepin]

Vevor 5-drawer drill bit / tap cabinet $46.82

Build quality is pretty comparable to new Huot.
Huot has dimples on top to facilitate stacking.
Vevor doesn't, but a non-skid pad does the job.
Vevor is about 1/4" wider/deeper so it sorta stacks with Huot.
Vevor has ball bearing drawer slides, Huot doesn't.
Vevor partitions are full depth, welded steel, immovable.
Huot partitions are plastic, removable (with effort), partial depth with bulk storage behind.

https://www.amazon.com/dp/B09987LKFN?tag=atomicindus08-20

These are great. I wanted one of the Huots for years, then discovered the Vevor and couldn't pass it up for the price. I recently made inserts for mine (see the 3d print thread) as the square bottoms making fishing bits out of the edges difficult.

 

[Roger.donaldston]

Bondhus 33197 Set of 9 External Twist Socket Set 3/8" DR 8-19MM - Amazon.com

Bondhus 33197 Set of 9 External Twist Socket Set 3/8" DR 8-19MM - Amazon.com

www.amazon.com

Just randomly found these Bondhus Metric bolt extractors with an almost half off coupon. I ordered one and there's a couple left it says. $24.11 shipped

 

[xjfish]

Bondhus 33197 Set of 9 External Twist Socket Set 3/8" DR 8-19MM - Amazon.com

Bondhus 33197 Set of 9 External Twist Socket Set 3/8" DR 8-19MM - Amazon.com

www.amazon.com

Just randomly found these Bondhus Metric bolt extractors with an almost half off coupon. I ordered one and there's a couple left it says. $24.11 shipped

Those look good and beefy. Unfortunately no coupon shows for me.

 

[2manytools]

Those look good and beefy. Unfortunately no coupon shows for me.

apparently some accounts lose good coupons over time. you can create a new one, and ones that should appear for most, will start again. I rather not lose my purchase history, so debating on weather its worth it or not

 

[Roger.donaldston]

I don't see the coupon available anymore either. I think there was only 1-2 from that seller after I got mine.

 

[T45]

Put one in my cart to check the price...and was deleted by amazon 30 seconds later....sold out.

There's "no coupon" because it was only for when amazon selling them, and it went away the moment they sold out AFAIK.

 

[zeekh]

I bought Gearwrench brand and I've been happy with them the handful of times I've used them.

 

[rockbaron1]

I find there is a metric equivalent for most common SAE sizes (external, not hex), but not the reverse. I believe I read this is because the 1mm gaps in metric sizing are within the tolerance of SAE size jumps. You can see on the chart below SAE is covered, but common metric like 9mm, 12mm, 15mm, 17mm and 18mm are not covered by SAE. So if I don't know for sure if something is SAE or Metric, I grab the metric set. But I prefer to use SAE when I know the item is SAE (electrical as several people pointed out). But my SAE tools no longer reside in the primary tool chest. The same way JIS drivers work well on Phillips but the reverse isn't true.

I kind of view SAE like I view flathead screws in modern equipment: it exists, I just don't know why.

I find that 11/16 and 17mm are usually interchangeable

 

[Madjik Man]

I bought Gearwrench brand and I've been happy with them the handful of times I've used them.

I found a completely unused Kimball Midwest set at the pawn shop years ago. Never heard of them but they’re Made in USA. Only used one once so far and it did the job well.

 

[wire]

SAE vs Metric has been discussed enough, back to deals!

DEWALT 10 Gallon STEALTHSONIC Shop Vacuum Wet and Dry 5 Peak HP DXV10S-QT

 

[wire]

CRAFTSMAN Crowfoot Wrench Set, Open End, MM, 10 Piece (CMMT12053LZ)

 

[wire]

CRAFTSMAN OVERDRIVE 49-Piece Gunmetal Chrome Mechanics Tool Set, Standard SAE/Metric Socket Set, with Hard Case (CMMT99049L)

 

[wire]

Available for preorder, release date Oct 1

• INCLUDES: VERSASTACK Case 3/8 in. Ratchet 3/8 in. Drive Extension Bar 3 in. 1/4 in. Dr. Mag Nut Driver 11-Piece Bit Set 3/8 in. Dr. 6PT Standard Socket 10mm, 12mm, 13mm, 14mm, 15mm, 16mm 3/8 in. Dr. 6PT Standard Socket 1/4 in, 5/16 in, 3/8 in, 7/16 in, 1/2 in, 9/16 in Extra 10MM Sockets (2) Bottle Opener Tape Measure Key Chain Magnetic Pick-Up Tool Stubby Slotted Screwdriver

12 Days of CRAFTSMAN Advent Calendar, Limited Edition Gift Box CMMT12426A

 

[wire]

Available for preorder, release date Oct 1

• INCLUDES: VERSASTACK Case 3/8 in. Ratchet 3/8 in. Drive Extension Bar 3 in. 1/4 in. Dr. Mag Nut Driver 11-Piece Bit Set 3/8 in. Dr. 6PT Standard Socket 10mm, 12mm, 13mm, 14mm, 15mm, 16mm 3/8 in. Dr. 6PT Standard Socket 1/4 in, 5/16 in, 3/8 in, 7/16 in, 1/2 in, 9/16 in Extra 10MM Sockets (2) Bottle Opener Tape Measure Key Chain Magnetic Pick-Up Tool Stubby Slotted Screwdriver

12 Days of CRAFTSMAN Advent Calendar, Limited Edition Gift Box CMMT12426A

Here's whats inside

 

[NightSky]

Available for preorder, release date Oct 1

• INCLUDES: VERSASTACK Case 3/8 in. Ratchet 3/8 in. Drive Extension Bar 3 in. 1/4 in. Dr. Mag Nut Driver 11-Piece Bit Set 3/8 in. Dr. 6PT Standard Socket 10mm, 12mm, 13mm, 14mm, 15mm, 16mm 3/8 in. Dr. 6PT Standard Socket 1/4 in, 5/16 in, 3/8 in, 7/16 in, 1/2 in, 9/16 in Extra 10MM Sockets (2) Bottle Opener Tape Measure Key Chain Magnetic Pick-Up Tool Stubby Slotted Screwdriver

12 Days of CRAFTSMAN Advent Calendar, Limited Edition Gift Box CMMT12426A

12 Days? Is this some of that Shrink-flation I've heard about?

 

[Cruzan80]

You never heard of the 12 Days of Christmas? Not a countdown Dec1-25, but rather Dec25-Jan5.

Thanks for the pics, trying to figure it out via description was a pain. Didn't see the CM playing cards listed, not sure if they are "trading cards" or 2-Ace.

 

[wire]

Yeah I know its from 2024 but it's almost 1/2 price and will go well with the GEDORE-R59003026 RED Socket Set 3/8 size6-24mm 26pcs that is if you bought it back in March when it was only $59 and not the current eye watering price

Gedore Red Advent Calendar 2024

 

[NightSky]

You never heard of the 12 Days of Christmas? Not a countdown Dec1-25, but rather Dec25-Jan5.

Thanks for the pics, trying to figure it out via description was a pain. Didn't see the CM playing cards listed, not sure if they are "trading cards" or 2-Ace.

Surely, but ISO/ANSI standard Advent Calendar consists of 25 days. They harmonized on that.

 

[Cruzan80]

Surely, but ISO/ANSI standard Advent Calendar consists of 25 days. They harmonized on that.

This must be DIN then...

 

[NightSky]

This must be DIN then...

Thought DIN generally adopted ISO standards. Guess this must fall under the Kringle exception program programme. [Edit]

 

[BWWgarage]

Yeah I know its from 2024 but it's almost 1/2 price and will go well with the GEDORE-R59003026 RED Socket Set 3/8 size6-24mm 26pcs that is if you bought it back in March when it was only $59 and not the current eye watering price

Gedore Red Advent Calendar 2024

I do buy the old wera adv calendars when I fine them cheap.