To avoid these ads, REGISTER NOW!

CFL vs T5HO

CRE Neal

Well-known member
Joined
Nov 9, 2011
Messages
52
Wow...searching the forum here I have seen some pretty slick looking CFL light setups..... I must admit I like the look of multiple hanging pendant lights much better then strip fixtures..... I Am pretty clueless about lighting...So I ask what would be the pro`s and con`s between using properly spaced CFL`s vs using T5HO strips.....
 
To avoid these ads, REGISTER NOW!

Provincial

Well-known member
Joined
Sep 21, 2011
Messages
6,883
Location
Near Salem, OR
First of all, T5HO fixtures should only be used 12 feet or more above floor level because the light is so intense. I have mine about 16 feet high and they are great. They provide good general lighting in my 40x60 shop using four 4-foot 4-bulb fixtures and 6500 kelvin bulbs. The light is too white/blue for many people, but it works fine for me. After working in there for a while, regular "cool white" lights are like sitting beside a camp fire!
 
OP
C

CRE Neal

Well-known member
Joined
Nov 9, 2011
Messages
52
I have a T5 HO on my 10`ceiling already...it is fantastic and definitely not too bright....
 

roaddog359

Well-known member
Joined
Nov 25, 2009
Messages
157
Location
Northwest Indiana
I have 6- 6 bulb dual ballast t5ho in my 36x48 with 12 ft ceilings and no light problems of being too bright. I may add 4 more down the road.
 
To avoid these ads, REGISTER NOW!

Charles (in GA)

Well-known member
Joined
Jan 11, 2006
Messages
12,489
Location
50 mi south of Atlanta
I have T5HO strips hanging over my workbench about 7 ft off the floor, with "cool white" 4000K bulbs in them and while they are bright, I like them. If you had lights with reflectors, it probably would be too much that low.

Phillips only makes T5HO in 3000K, 3500K and 4100K. OTHER Phillips literature states that 5000K and 6500K is being added to the line.

Phillips also now has a new energy saving T5HO called the Phillips Energy Advantage that is 49 watts as opposed to the regular 54 watt. Phillips also has an extreme temperature 54w bulb that has a much broader operating range of temperature at which it will produce 100% or near 100% light output.

Sylvania makes them in 3000K, 3500K, 4100K, 5000K, and 6500K

THREAD from September about the Lithonia T5HO 8 ft open strips that use 4ea of the 4 ft T5HO bulbs in tandem.

Charles
 
Last edited:
OP
C

CRE Neal

Well-known member
Joined
Nov 9, 2011
Messages
52
Well I went with the T5HO...in my 22x28 I installed 10 x 4' dual bulb T5HO strips , using Sylvania 5000K bulbs ! ..........All I can say is WOW ! very very bright, and exactly what I was looking for.....
 

camnick

Well-known member
Joined
Jan 2, 2011
Messages
78
Location
Central Indiana
I put 6- 4ft. 6 bulb T5HO in my 4 car garage with a 13ft ceiling. They are really nice and bright. I started putting 105W Eiko CFL's in my barn with 16 ft ceiling for general lighting. They output 420Watts at 5000K. They work great for this. It's going to be a toss up to which route I will take over the areas I work around all the time. I don't think you could go wrong with either.
 

Attachments

  • photo.jpg
    photo.jpg
    134.9 KB · Views: 52
  • photo2.jpg
    photo2.jpg
    128.1 KB · Views: 49

ddawg16

Well-known member
Joined
Jul 11, 2008
Messages
21,005
Location
S. California
Effeciency wise....the T5 is better than the CFL....in fact, they are better than the current batch of LED lights.....

If clearance is not an issue...T5 is the way to go. For me, my ceiling is 8' and I do woodworking...I didn't want to be hitting tubes with a chunk of wood...so I went recessed cans with CFL's in them.
 
To avoid these ads, REGISTER NOW!
Top Bottom