Craftsman Industrial Singles CHEAP!

[squashman702]

I have all the part #'s from the Craftsman Industrial catalog of all the wrench rolls they have, just not sure where you can order them from.

Do you happen to have a PDF of this? Actually looking for the P/N's of the long pattern full polish wrenches if you've got them.

 

[Travisnd]

Do you happen to have a PDF of this? Actually looking for the P/N's of the long pattern full polish wrenches if you've got them.

You can go to www.craftsmanindustrial.com and download the catalog. That's what I did, then I printed out all 453 pages in color of the catalog as I like having a hard copy of things.

 

[jonathan75]

Shameless weekly bump to see if anyone knows where to source the Industrial wrench rolls.

Should be easy enough for my Wife to make them. Just need to know what material and some specs.

 

[SMKS]

Harry Epstein has a nice wrench rolls that's made in the USA and affordable. They're only $7. I have one for the wrench set I keep in the basement for home repairs.

http://store.harryepstein.com/cp/ToolRoll/C14TR.html

 

[Mgnu]

I have all the part #'s from the Craftsman Industrial catalog of all the wrench rolls they have, just not sure where you can order them from.

OK, I totally missed that page when I was looking at the PDF catalog. You are right however, it's page 313.

Now, where to order these?

 

[Travisnd]

If you guys want the 14 pocket wrench roll, Craftsman sells them for $9.99....

http://www.sears.com/craftsman-14-pocket-wrench-roll/p-00934518000P?prdNo=1&blockNo=1&blockType=G1

 

[Larch]

Should be easy enough for my Wife to make them. Just need to know what material and some specs.

My wife has made me a few, she used duck cloth. They have turned out very nice. As far as specs, she just lines them up and measures them. Then before sewing the pouches, she puts the wrench's in and pins the lines to sew the pockets.

 

[Larch]

You can make them out of whatever. I had a Polo canvas jacket that I didn't like. She cut that up and made a roll that is very nice.

 

[71goldss]

If you guys want the 14 pocket wrench roll, Craftsman sells them for $9.99....

http://www.sears.com/craftsman-14-pocket-wrench-roll/p-00934518000P?prdNo=1&blockNo=1&blockType=G1

Those 14 pc rolls are super nice. I have a few that came with my 14 pc sets from the Outlet clearance. They are somewhat soft, but still heavy canvas (not rubberized), and the tie strings have velcro. Also, not that it really matters, but to refect the overall quality, the Craftsman logo is embroidered and not just screenprinted.

 

[jonathan75]

Here is what came in this week.

 

[jonathan75]

My wife has made me a few, she used duck cloth. They have turned out very nice. As far as specs, she just lines them up and measures them. Then before sewing the pouches, she puts the wrench's in and pins the lines to sew the pockets.

Yes, duck cloth is a good idea. I like how thick and tough it is.

 

[71goldss]

The 20 pc stubby set is up again. I've been passing on it since I already own both the metric & sae Northern Tool stubby sets. Decided what the hell and went ahead and ordered just now. Ended up $74.95 out the door with $10 SYWR back for future purchase. I'll just put my NT wrenches in my emergency roadside kit. That kit's getting pretty big thanks to GJ. I may have to get a bigger vehicle!

 

[Jcc76]

You guys are awful. After reading the back and forth about the stubby wrenches, I decided to pop for them tonight. They better not be Chinese, though, or they're going right back!

 

[alxdgr8]

Got my stubbies, they're USA

 

[Tellingthem]

Looks like they just dropped the prices down of the remaining Industrial items. I haven't seen anything new added yet though.

 

[sucking chest wound]

You guys are awful. After reading the back and forth about the stubby wrenches, I decided to pop for them tonight. They better not be Chinese, though, or they're going right back!

I got the stubbies a few weeks ago. USA.

 

[indyokie]

Several of these now say - unable to ship to store, and you can't ship. Any tricks to make them ship ? I'll pay the UPS- ( even though free shipping with SYW )

 

[Digital4n6]

Several of these now say - unable to ship to store, and you can't ship. Any tricks to make them ship ? I'll pay the UPS- ( even though free shipping with SYW )

i think it's just the sears website being terrible and having an error in stock levels. have seen that on a few that i really needed to complete my sets.

 

[EdJack]

Several of these now say - unable to ship to store, and you can't ship. Any tricks to make them ship ? I'll pay the UPS- ( even though free shipping with SYW )

I think they are out of stock online. So Sears says you can get them store pickup (based on store inventory). So you can buy them for store pickup, if the store has them. But the stores don't carry Craftsman Industrial. So it's a Catch 22 - if the store has them you can buy them online and pick them up. But stores don't carry Industrial, so you can pick them up.

 

[rickhigginshtbr]

no, but you can ship to store, like I did to get mine.

The way the website works with that no ship glitch... it means someone has it sitting in their cart and haven't checked out yet... it stays there for 4 hours til released back to the public. that's why it may work one minute, but not the next.

btw, picked up my dozen tonight... 3 non industrials, and 2 I ordered I already had... meh, still a hell of a deal.

Any new sku's added yet?

 

[Pumpman1968]

Did anyone end up with an extra 11/16 and/or 3/4" stubby? They were out of those sizes when I ordered. PM me if you have extras you would part with. Thanks.

 

[Harrison2]

so sears fecked up, i asked online to confirm that the wrenches I had ordered were professional despite the picture and model number and was told they were.

picked them up today to find they're industrials. theyre the same wrenches as I know but now due to my tool OCD I need to find pros' for my set.

so if anyone has a 20 and 21mm Pro they wish to swap for a industrials, pm me.

failing that I have a 21mm industrial for sale aswell as a t60 socket and a inch socket, which I would also be open to swapping for pro wrenches 20mm+

 

[KinzeMech]

20mm is a size that does not exist as a Craftsman Professional full polished wrench. I filled that gap in my set with a CI.

I have two full sets of CM Pro wrenches. I actually prefer the CI ones, as the size is stamped on both ends so I don't have to pull the wrench nearly fully out from the roll pouch to identify it. I would be willing to swap you that one if you want. Mine are a few years old, and gently used. Honestly, I don't think 21mm is a size I've ever used, so the wrench may be in like new cosmetic condition.

 

[Harrison2]

20mm is a size that does not exist as a Craftsman Professional full polished wrench. I filled that gap in my set with a CI.

I have two full sets of CM Pro wrenches. I actually prefer the CI ones, as the size is stamped on both ends so I don't have to pull the wrench nearly fully out from the roll pouch to identify it. I would be willing to swap you that one if you want. Mine are a few years old, and gently used. Honestly, I don't think 21mm is a size I've ever used, so the wrench may be in like new cosmetic condition.

AHHH yes I had forgotten that 20 was only available through CI, I may build 20mm+ in industrial then, i'll see what sears say in regards to them swapping my 21 in store for a 21 PRO.

if not then id be happy to swap

 

[Travisnd]

Got these Craftsman Industrial deep offset wrenches Made In USA today to go along with a few I already had!




Only 3 more wrenches to get left to complete both sets! They will be ordered this weekend!!

 

[SchillerM]

Ordered from K-Mart for first time..
Merch total $20.48
SYWR Redemption $11.75 ($6.75 in fitstudio points, $5 surprise points on $15 purchase at KMart.com)
Pre Tax $8.73
Tax $0.70
Total $9.43

Coupon $10 in points on $20 purchase... (Craftsman Club email)
Effective Total $0.57 gain & 7 tools
3/8" 3/8" Drive 12pt Flex socket "Craftsman Professional Use" - Expecting regular USA made
1/2" 3/8" Drive 12pt Flex socket "Craftsman Professional Use" - Expecting regular USA made
29mm 1/2" Drive 12pt socket "Craftsman Professional Use" - Expecting regular USA made
7/8" 1/2" Drive 12pt socket "Craftsman Professional Use" - Expecting regular USA made
1/2" 1/2" Drive 12pt socket - Title ends in "Standard Socket /2 Inch Drive", based off the other sockers, expecting Craftsman Industrial
32mm 1/2" Drive 12pt socket - "/2 Inch Drive", Expecting Craftsman Industrial
Craftsman Professional No 0x3" Phillips Screwdriver

Not too bad of a haul, although this is one of the higher amounts of $ out of pocket for bag of tools, at least I got $10 back in points.
Worth mentioning, even though I ordered through the KMart website and got the points credits for that, its all set for pickup at my regular Sears. If not for that, I wouldn't ever use KMart...

Matt
P.S. Due for a 2014 1st quarter pic once these come in. Scored quite a few goodies with minimal out of pocket..

Also, anyone have a 13mm Black Oxide that they don't want? Last in the basic set..

 

[EdJack]

Got these Craftsman Industrial deep offset wrenches Made In USA today to go along with a few I already had!




Only 3 more wrenches to get left to complete both sets! They will be ordered this weekend!!

Oh man. I got excited when I saw that picture of all those Craftsman Industrial Deep Offset Wrenches. I though Sears listed a bunch more Industrial, and started scrambling over to the website to look for them.

 

[toolmutt]

Hey Travisnd, what wrench racks are you using for those deep offsets?

 

[Travisnd]

Oh man. I got excited when I saw that picture of all those Craftsman Industrial Deep Offset Wrenches. I though Sears listed a bunch more Industrial, and started scrambling over to the website to look for them.

Sorry Ed, only a few are from Sears, the rest I ordered elsewhere!

Hey Travisnd, what wrench racks are you using for those deep offsets?

Those are old Craftsman wrench racks, that I don't believe they sell anymore. At least I've looked at a few Sears local to me and can't find those style wrench racks anymore.

 

[toolmutt]

Thanks. I was just about to make some holders for my deep offsets. I have a Sears Parts and Repair Center near me that also has a small sales floor with discount, overstock and discontinued items. I'll check there.

 

[dewmor]

It looks like Grainger is marking these down as well. The prices aren't as good as the Sears prices, but some of the black oxide versions are as low as $1.90. I had to order a few from them to fill in the gaps and they shipped them to me very quickly. Here's a link.

http://www.grainger.com/product/CRA...man+industrial+wrenches?sst=subset&s_pp=false

 

[SchillerM]

It looks like Grainger is marking these down as well. The prices aren't as good as the Sears prices, but some of the black oxide versions are as low as $1.90. I had to order a few from them to fill in the gaps and they shipped them to me very quickly. Here's a link.

http://www.grainger.com/product/CRA...man+industrial+wrenches?sst=subset&s_pp=false

Thanks for sharing!! I can get my 13mm black oxide that I am missing! Will have to look around for fun as well. Too bad I can't use points on it
Matt

 

[byoungblood]

Has anyone actually been able to place an order for the 21/23mm deep offset? It has been showing up in the search results for the past two weeks, and the price marked down to $6.47 to boot, but I can't actually order it. Says it is unavailable to ship and of course nobody around here stocks them.

 

[rice rocket]

Here's a metric set from Grainger marked down 75%.

http://www.grainger.com/product/CRAFTSMAN-Combo-Wrench-Set-3LXW4?functionCode=P2IDP2PCP

 

[SchillerM]

Todays haul... Batteries delivered to house and only thing that cost me, $4 shipping.
Rest was all points. Two $5 in store credits too

Matt

 

[Sleipnir]

Todays haul... Batteries delivered to house and only thing that cost me, $4 shipping.
Rest was all points. Two $5 in store credits too

Matt

That's pretty slick Matt,

Store credits from waiting for pick up?



SchillerM... Wish I got the $10 off $20 craftsman e-mail lol, woulda made my last haul free

I think Grainger has the 13mm for 1.90 now

 

[Travisnd]

Has anyone actually been able to place an order for the 21/23mm deep offset? It has been showing up in the search results for the past two weeks, and the price marked down to $6.47 to boot, but I can't actually order it. Says it is unavailable to ship and of course nobody around here stocks them.

I was able to order that, though I ordered the 1st day they were added to the site, as they didnt last long!!

 

[Travisnd]

Just placed a big order from Summit to complete my Craftsman Industrial sae & metric deepset wrench set. Also purchased some metric ratcheting locking flex heads to complete that set! Will have photos within the coming weeks once it arrives!!

 

[SchillerM]

That's pretty slick Matt,

Store credits from waiting for pick up?



SchillerM... Wish I got the $10 off $20 craftsman e-mail lol, woulda made my last haul free

I think Grainger has the 13mm for 1.90 now

Yeah store credit for pickups. I got 3 for a 10 minute wait on a few orders. Guy printed credit out and brought it to me in tool department. Spent one on the wrenches. I have 2 left from yesterday and 2-3 left from a few months ago.. All expire in 2 weeks, need to go have a $5 shopping spree! This will work well to close a few gaps on sockets..

$4.04 for the 13mm black oxide. Well worth it not to have the anxiety of an empty slot..
Matt

 

[Sleipnir]

Cman pro screwdrivers if u cant think of anything else. Cant use them both at once?