To avoid these ads, REGISTER NOW!

Crusher run=recycled concrete?????

Cobra5150

Well-known member
Joined
Feb 2, 2008
Messages
1,957
Location
GA
My shed is ready for delivery and the guy I was talking to quoted $850 for #57 and $450 for crusher/run. He then says the C/R is recycled concrete. Is this OK or go with the 57?
I always thought the C/R was the last bits left after grinding.
 
To avoid these ads, REGISTER NOW!

PCustoms

Well-known member
Joined
Jul 23, 2011
Messages
23,263
Location
VT
My shed is ready for delivery and the guy I was talking to quoted $850 for #57 and $450 for crusher/run. He then says the C/R is recycled concrete. Is this OK or go with the 57?
I always thought the C/R was the last bits left after grinding.

I think the term is used differently depending on region.

I'm assuming this is a small shed on skids (no details were given), so more then likely any sort of permeable gravel/rock/concrete that will compact (hold together ) is fine

 

racecougar

Well-known member
Joined
Jan 26, 2021
Messages
5,154
Location
Missouri
Uh, "crusher run" is stone (limestone here in MO), not recycled concrete.

Is this a garden shed, or something going on a pad or foundation?
 

yelchevelle

Well-known member
Joined
Jun 15, 2018
Messages
178
Location
Hoover, AL
I consider crusher run as 3/4 minus, but they sell it different ways. 8910 is like either 3/8 or 1/4 minus i think. I have a place that sells concrete, and they screen out the 3/4” material and sell it separately from the dust (8910). Anything that has the dust(8910’s)that is going to be a foundation or base layer should be compacted. 57 stone should get you 90-95% compaction right off the truck, hope this is helpful
 

finn

Well-known member
Joined
Mar 27, 2005
Messages
16,322
Location
The UP, God's country
Not specifically about recycled concrete, but I was talking to the landscape contractor who was installing pavers at the house a couple weeks ago. We’re in the extreme North of the UP, he was originally from Southeast Michigan, ie Metro Detroit..

He rattled off three names for what we refer to as CMR, or Crushed Mine Rock. Each term is predominant in different parts of the state, but describes essentially the same product. You really have to talk to your local material supplier to understand the lingo in your own area.

I had the same discussion with the pit Forman about a different product maybe five years ago.
 

kwb

Well-known member
Joined
May 1, 2009
Messages
1,776
Location
PNW
Recycled concrete can be a great base material. Watch for leftover bits of wire mesh.
It packs well but finished appearances isn't as good as actual crushed rock. I have used it and then topped with a small amount 5/8minus.
 
OP
C

Cobra5150

Well-known member
Joined
Feb 2, 2008
Messages
1,957
Location
GA
Yep, it's a 12x20 garage on skids. I think I'll spend the extra $400 and get actual stone. The guy is delivering some C/R close by but I will go by and check it out just to see.
 

firebirdparts

Well-known member
Joined
Jun 8, 2016
Messages
10,649
Location
Kingsport, TN
Crusher run packs down well because it's not sorted to size. As a result, it has a small void fraction. Good base to pack down. That's what it's for. It doesn't have anything to do with recycled concrete.

FWIW I wouldn't want to pay extra for 57. There might be some reason why that would be better for you, I guess. Might be better on a slope.
 
OP
C

Cobra5150

Well-known member
Joined
Feb 2, 2008
Messages
1,957
Location
GA
This is what he’s been getting lately. Looks like something that’ll just mix in and make a big mess
 

Attachments

  • IMG_2751.jpeg
    IMG_2751.jpeg
    874.2 KB · Views: 11

FTG-05

Well-known member
Joined
Oct 11, 2012
Messages
1,541
Location
TN
Recycled concrete can be a great base material. Watch for leftover bits of wire mesh.
It packs well but finished appearances isn't as good as actual crushed rock. I have used it and then topped with a small amount 5/8minus.
My rock guy won't lay down recycled concrete on roads anymore. Too much of this:

IMG_6557 (Large).JPG


IMG_6558 (Large).JPG

Recycled concrete was put on part of my one-mile gravel road in 2019. Those pics above were taken April 2025.
 
To avoid these ads, REGISTER NOW!
OP
C

Cobra5150

Well-known member
Joined
Feb 2, 2008
Messages
1,957
Location
GA
Got the load of 57s this afternoon. Tomorrow skid steer is being delivered and building setup Monday.

Also got some “stones” for some landscaping for Mrs C.
 

Attachments

  • IMG_2785.jpeg
    IMG_2785.jpeg
    1.7 MB · Views: 9
  • 5956EA49-B816-415A-A545-CCFEF8E9DF35.jpeg
    5956EA49-B816-415A-A545-CCFEF8E9DF35.jpeg
    1.1 MB · Views: 6

jblnut

ALLIANCE MEMBER
Joined
Jan 17, 2015
Messages
7,102
Location
In the Middle of MN
Around here the “crusher run” product like you pictured is just about given away from the only local guy that crushes waste concrete. Basically you’re paying for the hauling. I’ve gone with my dump truck a bunch of times to pick it up and give them around $4/yd. I like to put it on muddy field roads where it mixes in and packs decently with just farm machine traffic.

Not what I’d use under a shed though. Good call of getting actual stone !!
 

sgrammel

Well-known member
Joined
Oct 27, 2009
Messages
1,354
Location
The 'couv
Got the load of 57s this afternoon. Tomorrow skid steer is being delivered and building setup Monday.

Also got some “stones” for some landscaping for Mrs C.
The small pic of the 'stones' at first glance looked like some 'product' Tony Montana would have.. :)
 

abfish

Active member
Joined
Sep 20, 2024
Messages
42
A few comments on crushed concrete: If the crushing is done properly, the material will pass DOT specs for ABC (Aggregate Base Course or crusher run). That means it has the right gradation of fines and larger pieces to compact properly. We built some subdivision streets 10 years ago with crushed concrete and they're in perfect condition today.

We did get a couple of flats from rewire that was in the concrete. The crusher has a magnetic separator but it's not perfect. Once the guys on the ground with shovels started looking for wire, we had no more issues.

I agree with your use of #57 regardless.
 

Mike65

Well-known member
Joined
Mar 7, 2007
Messages
3,094
Location
Horse Pasture, Va.
When we got our shed it was built on skids. We made a boarder from PT 4x4's pinned to the ground with rebar, laid weed block & a layer of river rock. The shed was the site built on the rock.



100_2067.JPG
 

Renegade1LI

Well-known member
Joined
Mar 11, 2018
Messages
4,979
Location
long island ny
The local crusher run around here is all stone, 3/4 minus & packs real well. I put down 6" cr & then topped with a couple inches of 3/4 works out great, no weeds. The cr makes a great subase as it compacts so well & adding 3/4 on top locks in well & gives a clean surface & can always place concrete on top.
 

Renegade1LI

Well-known member
Joined
Mar 11, 2018
Messages
4,979
Location
long island ny
Pad i did for our pontoon boat storage, going on third year and have had zero problems.
 

Attachments

  • IMG_20231111_164354_01.jpg
    IMG_20231111_164354_01.jpg
    1.2 MB · Views: 5
  • IMG_20231111_163803_01.jpg
    IMG_20231111_163803_01.jpg
    1.4 MB · Views: 9

finn

Well-known member
Joined
Mar 27, 2005
Messages
16,322
Location
The UP, God's country
I brought several loads of crushed concrete for my driveway with my little 3 yard dump truck about a dozen years ago. At the time the pit master said some people didn’t like it because of the white color.

It’s still holding its own, but could use a fresh topping.

Interesting, the color has morphed to regular gravel color over the years for the most part.
 
To avoid these ads, REGISTER NOW!
Top Bottom