Ebay or Auction Deals Permathread!

[a52-830]

For those who submitted questions about the 3/28 code, are you submitting them on eBay's site to eBay themselves, or PayPal? It keeps wanting to direct me to PayPal.

i actually didnt submit a question, i tried to use the code, and it failed. i assume they went through the error logs, found all the code failures, and just emailed the apology to those accounts.

i will give them points for that . . . . i consider it beyond what i expected, i thought about questioning it, but it seemed like too much work at the time.

 

[T45]

There is what appears to be an early snap on KR65, that has been restored, on ebay for $50+25=75 shipped. Despite the non-original conidtion, it is probably a good deal.

http://www.ebay.com/itm/Snap-on-Box/322478279426

Please note that the latch and lock are after market and the box appears to be re-painted.

 

[Jacan]

10% coupon on selected products from selected sellers, most its for business

use coupon code CB2BSPRING
ends april 14

you can use this link to see if you find any gem

http://www.ebay.com/

Share anything you find interesting

 

[7avalon7]

i actually didnt submit a question, i tried to use the code, and it failed. i assume they went through the error logs, found all the code failures, and just emailed the apology to those accounts.

i will give them points for that . . . . i consider it beyond what i expected, i thought about questioning it, but it seemed like too much work at the time.

Yep same here. I got an error when trying to use it. I too receive the courtesy coupon, and have use it. Luckily I have not purchase that tie rod set for my car, so I still get the $15 off. Kudos to eBay!

 

[B_Bimmer]

http://www.ebay.com/itm/Snap-On-SSD...370115?hash=item36167aa403:g:X2cAAOSw5UZY9Wy9


CHEAP snap on ratcheting screwdriver with bits.

 

[Jarhead0408]

http://www.ebay.com/itm/Snap-On-SSD...370115?hash=item36167aa403:g:X2cAAOSw5UZY9Wy9


CHEAP snap on ratcheting screwdriver with bits.

I don't know why...but that links to a site called "Vigilink"; not eBay.

 

[B_Bimmer]

I don't know why...but that links to a site called "Vigilink"; not eBay.

I do not know either... It is doing the same for me. It must be garage journal doing it.

http://www.ebay.com/itm/Snap-On-SSD...370115?hash=item36167aa403:g:X2cAAOSw5UZY9Wy9

 

[SchillerM]

I do not know either... It is doing the same for me. It must be garage journal doing it.

http://www.ebay.com/itm/Snap-On-SSD...370115?hash=item36167aa403:g:X2cAAOSw5UZY9Wy9

Takes me to eBay on Mobile web.. but it's sold anyways, so..

 

[jl4c]

http://www.ebay.com/itm/222472377840
EASCO 721413 3/8 DRIVE FLEX HEAD RATCHET
WITH QUICK RELEASE BUTTON THUMBWHEEL

$29 delivered
These are the same as the coveted Craftsman RHFT flex except with a better handle.
7 left as of 4/18/2017 2pm MDST

 

[z2w]

A machine shop in Addison, Illinois appears to be liquidating an inventory of large machines gears:

Nine spur gears, 8 pitch, 24T through 32T, 1 1/4" wide face, 14.5-degree pressure angle, for $60 shipped.

Ordering all nine of these sizes from Amazon (made by Boston Gear or Martin) would cost hundreds of dollars. There are a couple dozen lots like this, with a range of gears of the same pitch (tooth size) and general geometry, but different sizes. Some I believe are bronze, which seems pretty nuts, you could practically grind off the teeth and make them into hammers and come out ahead they're so cheap.

 

[Loscaldazar]

Snap On low Profile ratchet+sockets. Mislabeled as just the ratchet part number, probably why the bid is 1/2-1/3 of what these go for in similar condition

http://www.ebay.com/itm/Snap-On-Sli...568727?hash=item1c82dc6f17:g:hIgAAOSwkShY-ApS

 

[XJPat]

EBay flash sale 15off75
Code Pshopsave15

Sent from my SCH-I545 using Tapatalk

 

[a52-830]

EBay flash sale 15off75
Code Pshopsave15

Sent from my SCH-I545 using Tapatalk

thanx. i leave stuff in my cart for these sales . . . . .

 

[EOC_Jason]

I saw this and started putting stuff in my cart, then I had to help my neighbor for a minute, which turned into a few hours... So I missed out... Probably for the better...

I saved $75 instead of only $25...

 

[tarbellb]

That VIGLINK thing is annoying.

You can turn it off by going to the site and OPTING OUT.

http://www.viglink.com/opt-out/​

I think it was initiated by Garage Journal, lame that they opted everyone in?

 

[a52-830]

cripe distributing (great seller) seems to have a bunch of gedore stuff on sale. dont know if the prices are great or not, since this is not my thang, although a bunch of people around here seem to love them:

http://www.ebay.com/sch/m.html?_odk....TRC2.A0.H0.Xgedore.TRS0&_nkw=gedore&_sacat=0

note that if you are buying a bunch of things, you can put them in a cart, and ask them to quote shipping, since they will discount it for multiple items. they also have a bunch of stuff on their web page: http://www.cripedistributing.com

if you buy from there (and have an account, so that the cart persists), put what you want in a cart, and hit the "questions" button at the top, and list the stuff you want from ebay that isn't on their web site, and they will add them to your cart, and quote you shipping. i have done this several times.

great people to deal with.

 

[PureLeaf]

Yea the Gedore sales via Cripe have been going on for a while. Some of them are older model items. (older style grips etc). Still perfectly useable tools.

 

[tarbellb]

I have never seen this on Cripe before, but looks like a smoking deal if

A) you have 3ph power

B) know how to wire up a VFD

8" Palmgren 230/330v 3/4hp Grinder w/ dust collection- made in Taiwan - $180 shipped

LINK

 

[csmitty]

VFD's up to 1hp are pretty cheap now a days. I'm running a 1.5hp 3 phase 10" Powermatic Grinder off a 1hp Teco VFD. You can set the ramp up time so as long as you don't try to spin it up all at once the VFD seems ok with it. Amp wise it feel in line with the VFD ratings.

Seems cheaper from this site and still from cripe.
https://www.bonanza.com/listings/Pa...&ad_type=pla&gclid=CJLEgPjn0dMCFZcjgQodWpgBUA

Looking at other sites you can find that grinder for not to much more.

 

[EOC_Jason]

I miss four.cycle posting stuff...

 

[ColdSoda]

I miss four.cycle posting stuff...

^ What he said

 

[boomerangg22]

why where did he go?

 

[2manytools]

why where did he go?

probably taking some time to actually use some of the tools he has purchased.

 

[bigvic]

Yost 750-DI vise on sale for $168.70 with free shipping. I've been watching for a deal on these for a while and haven't seen it this low before. It's not a Wilton or similar or USA I believe, but it is very stout and made with ductile iron, and gets good reviews.

Also, only 100 available at this price.

http://www.ebay.com/itm/222492788000?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT

 

[jl4c]

I miss four.cycle posting stuff...

I PM'd him the other day telling him the same thing. He said he was just busy but left me with the impression he wasn't gone for good.

 

[Fatboy148]

Yost 750-DI vise on sale for $168.70 with free shipping. I've been watching for a deal on these for a while and haven't seen it this low before. It's not a Wilton or similar or USA I believe, but it is very stout and made with ductile iron, and gets good reviews.

Also, only 100 available at this price.

http://www.ebay.com/itm/222492788000?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT

Did you check Amazon? It's a few $$$ less there and Amazon has a pretty good return policy:

Yost Tools

Yost Vises 750-DI 5" Heavy-Duty Multi-Jaw Rotating Combination Pipe and Bench Vise with 360-Degree Swivel Base and Head

4.7 out of 5 stars 155 customer reviews | 18 answered questions

Price: $151.52 FREE Shipping (3 days) for Prime members


https://www.amazon.com/dp/B00CBL62HQ/?tag=atomicindus08-20


For price history....


https://camelcamelcamel.com/Yost-He...-360-Degree/product/B00CBL62HQ?context=search


Lowest * $124.44 Dec 27, 2016

 

[bigvic]

Did you check Amazon? It's a few $$$ less there and Amazon has a pretty good return policy:

Yost Tools

Yost Vises 750-DI 5" Heavy-Duty Multi-Jaw Rotating Combination Pipe and Bench Vise with 360-Degree Swivel Base and Head

4.7 out of 5 stars 155 customer reviews | 18 answered questions

Price: $151.52 FREE Shipping (3 days) for Prime members


[/QUOTE] Dangit, I've been watchin...well, I guess I spent $15 more than I had to.

 

[isuhunter]

WrightGrip Wrenches

Ebay link

 

[TBrian]

Not a deal from Ebay, but I just bought some stuff on the Sortimo store:
http://www.sortimo-shop.us
They have a Promo 10% off entire purchase

 

[2manytools]

Not a deal from Ebay, but I just bought some stuff on the Sortimo store:
http://www.sortimo-shop.us
They have a Promo 10% off entire purchase

Not that it would be hard to get to with their prices, but the minimum purchase price is $500. Great looking stuff. well reviewed on ToolGuyd


You should create a new thread for proper attention. At one point in time I would have missed your post, as I never browsed this thread. Your deal pertains to different seller than this thread is for, & isn't an auction.

 

[RagTopTA]

Any of you snap On guys near Ponca City Oklahoma heres some tool cabinets for a descent price looks like...

https://oklahomacity.craigslist.org/tls/6125373736.html

 

[starquestMM]

Manteca California pickup only: $20 Craftsman block grinder 1/3hp industrial

 

[Richard Cranium]

Ragtop, that is a great deal on the cabinet, esp. with the glass doors.
Sure wish I was closer

 

[z2w]

Vermont American Hook and Pick Set 50462
$6 shipped and made in USA
I just received them yesterday and was amazed with their quality and finish. I have similar set from HF for couple bucks. They work, but ones from ebay are so nice.

Several months ago I bought a set of these on the strength of this review. I've been consistently VERY happy with them. They're still $6, or you can get 10 for $33, and honestly I'm very tempted to buy ten. Give half away and keep half for myself for when these ones wear out or get lost. It seems like they're not being made anymore.

 

[pescados666]

Several months ago I bought a set of these on the strength of this review. I've been consistently VERY happy with them. They're still $6, or you can get 10 for $33, and honestly I'm very tempted to buy ten. Give half away and keep half for myself for when these ones wear out or get lost. It seems like they're not being made anymore.

I picked those up awhile ago after I finally retired my HF set. These are great quality for the price. Haven't had any type of issues with handles slipping or metal wear or bends yet.

 

[tool_scrounge]

Want a good deal on a Columbian 10203 604M3 4" machinist vise with swivel base?

New on Amazon they are $530

Here is a NOS one on Ebay marked Wright Tool for $299.99 + $29 shipping

http://www.ebay.com/itm/Wright-90203-10203-604M3-Machinist-4-Vise-W-Swivel-Base-New-Old-Stock/351874332766

 

[ccmac]

Toolup is running a sale on the 2217-20 milwaukee multimeter on their ebay account.

Everywhere else it seems $159 is the going rate but i just purchased one and the "add to cart to see price" price was $129

been needing a new multimeter to ride in the pickup and these appear to have really good reviews, plus will match all my other milwaukee tools.


http://www.ebay.com/itm/Milwaukee-2...752908?hash=item5696a7968c:g:hkUAAOSwo4pYgSLy

 

[pendragon1998]

Several months ago I bought a set of these on the strength of this review. I've been consistently VERY happy with them. They're still $6, or you can get 10 for $33, and honestly I'm very tempted to buy ten. Give half away and keep half for myself for when these ones wear out or get lost. It seems like they're not being made anymore.

Well, you guys make them sound so delicious, I had to order a set.

 

[GForceJunky]

Well, you guys make them sound so delicious, I had to order a set.

Get these:

https://www.amazon.com/gp/product/B000X26R7K/?tag=atomicindus08-20

Have a set - they're the best I've ever had. Made in the USA as well IIRC. They're long though, so if you need some that are short and manoeuvreable they may not be a top choice.

 

[pendragon1998]

Get these:

https://www.amazon.com/gp/product/B000X26R7K/?tag=atomicindus08-20

Have a set - they're the best I've ever had. Made in the USA as well IIRC. They're long though, so if you need some that are short and manoeuvreable they may not be a top choice.

I have a set of 4 branded Craftsman that I think are rebrands of those. They're ok. The cushioned sleeve pulls off and I snapped one once. Sears warrantied it.