Found a deal on craigslist? - List Here!

[dkroth]

http://rochester.craigslist.org/tls/5103689930.html

VINTAGE SK WAYNE 1/2 DRIVE SOCKET SET - $40

 

[CNGsaves]

^ ^ ^ Wow, I'd drive an hour to snag that great old SK set.

PLEASE . . . some GJer's snag that green gem !!

 

[PFSard]

I wish I had a place for this. Posted 42 minutes ago.

11 drawer tool crib - $200
http://phoenix.craigslist.org/evl/tls/5111831450.html

It is a Stanley Vidmar tool crib. It has 11 drawers that are 25 1/2 x 25 1/2 x 4" deep. The over all dimensions are 30w x 27 1/2 deep x 59" high. there are 14 drawer dividers total. I am only asking 200.00 firm.

 

[zkling]

Is this a good deal?
http://baltimore.craigslist.org/tls/5107734460.html

I can't believe the seller actually set that on their trunk.

 

[DRRummel]

I can't believe the seller actually set that on their trunk.

I thought the same thing.

 

[Contract_Pilot]

Dorian BXA Tool Post. http://portland.craigslist.org/mlt/tls/5089411965.html

 

[catsass]

Shopsmith for free to first taker -*@#$$1*@#$(Stanley,NC)

FROM THE Charlotte NC CL Tool section.

Sent from my SM-G920P using Tapatalk

 

[larryq]

Big 3 phase 1407w Baldor in Aptos, CA for $325. (List price at Baldor is $4k.)
"No issues whatsoever other than it's in our way. Thank you."
So help get it out of their way!

http://sfbay.craigslist.org/scz/tls/5113921290.html

 

[anodyne33]

Tool Board. Basically Free.


http://pittsburgh.craigslist.org/tls/5100010206.html

Hanging Wrench and Socket Organizer Board - $5 (natrona)

 

[larryq]

Big 3 phase 1407w Baldor in Aptos, CA for $325. (List price at Baldor is $4k.)
"No issues whatsoever other than it's in our way. Thank you."
So help get it out of their way!

http://sfbay.craigslist.org/scz/tls/5113921290.html

Okay, so they just raised the price to $425, and added a link to the Baldor website in the description. Is the seller on here, reading this board??

 

[danfromsyr]

Oswego, NY

http://syracuse.craigslist.org/tls/5108854614.html

metal parts bin - $5 (oswego)

aprox. 100 metal parts bin $5 each or make a deal for more. call chris 315-343-6220

 

[bmxdad]

7000 lb automotive lift - $500 (puyallup)

Was going to buy, but cylinders go up with car, to about 14'. And width is set by bottom plate. But it does have a new cable and pump.
<hr>
http://seattle.craigslist.org/tac/tls/5115336963.html

7000LB Older ROTARY lift, open top NEW cables Pump recently gone thru works excellent 220V YOU HAUL NO EXCEPTIONS NO TRADES $5OO

 

[zyx5432]

This seems like a decent deal, maybe?

http://houston.craigslist.org/tls/5080653070.html

 

[organ]

Nice Rockwell 8", 3/4 HP grinder in the Atlanta area for $100: http://atlanta.craigslist.org/nat/tls/5104145118.html

The price on this is down to $80... if he comes down any more I'm gonna have to take it...

 

[macgee]

The price on this is down to $80... if he comes down any more I'm gonna have to take it...

If you wait, it will be gone. It's already priced well for a 3/4 hp, 8" wheels.

The tool rest's are missing. Give him a call and ask if he'll take a little less.

It would make a good polisher

 

[organ]

I don't want to have to buy it... no space, long drive.

 

[anodyne33]

http://pittsburgh.craigslist.org/tls/5118115868.html

US General tool box - $225 (crafton)

Like New ,44inc tool box cabinet. great condition. it has 13 drawers. great for industrial work or auto mechanic work as well as body work. I need it gone asap. will work with price. feel free to call or text.

 

[PFSard]

snap on tool box 5feet high - $400 (Mesa)
http://phoenix.craigslist.org/evl/tls/5119417131.html

Have a nice Snap On tool box for sale
Let me know if you have any questions

 

[larryq]

Sigh, Wilton vise for $55, about 55 miles from me, in Concord CA. No chance I can get to it in time, hope someone else here can:

http://sfbay.craigslist.org/eby/tls/5119494158.html

"Wilton Vise is. 4 and 1/2 inch---Made in USA---See Pictures"

 

[piotrek]

2002 Saylor-Beall VT-755 Compressor - $200

Seems like a decent deal.
http://albany.craigslist.org/for/5116062175.html

 

[dkroth]

Craftsman Cantilever Tool Box - $25

http://rochester.craigslist.org/tls/5121623311.html

 

[CNGsaves]

Wow, I'd love to have that pristine crowntop Craftsman cantilever toolbox as it matches larger one I got for son with 2 latches and lock latch in middle.

Any one is Rochester (Webster, NY) going to snag that one for GJer ?? Wouldn't bother me a bit for "GJ Train" taking a year to transport my way !!

 

[bdk1976]

2002 Saylor-Beall VT-755 Compressor - $200


Seems like a decent deal.
http://albany.craigslist.org/for/5116062175.html

I paid a lot more than that for my Saylor Beall with a 705 pump and it is worth every penny. That looks like a steal!

 

[1Garageman]

2002 Saylor-Beall VT-755 Compressor - $200

Seems like a decent deal.
http://albany.craigslist.org/for/5116062175.html

Seems to good to be true??

That air compressor cost over $5,000 new.

http://www.nhproequip.com/saylor-beall-vt-755-120-tank-mounted-vertical-air-compressor

 

[piotrek]

Yeah, seems like the guy is off by a zero.

 

[larryq]

Yeah, seems like the guy is off by a zero.

Agreed. Someone actually getting that for $200 would create a sucking sound you could hear across the Atlantic.

 

[coralnut]

it probably needs an overhaull. if that's the case then it's not worth 2k

 

[firworks]

Pretty good looking Snap-On top box here for 250$ in central IL:
http://peoria.craigslist.org/tls/5124689213.html

 

[firworks]

No, that KRA58 is WAY over priced. "in fairly good shape besides some rust"

I just offered the guy 90$ since it's still available. I thought it might be a fun project to sand down and try to repaint and see what I could do with it.

 

[macgee]

SNAP ON 3 piece TOOL BOX - $350 (long beach, CA)

It looks a bit tired, the mention of needing oil maybe code that the draws are dragging.

"SNAP ON TOOL BOX in fair condition needs a some oil and clean up all drawers good all there selling complete will not separate $350 obo"

I'd offer $250 max.

http://losangeles.craigslist.org/lgb/tls/5113953002.html

 

[zkling]

Still has the auction tag on it.

I just offered the guy 90$ since it's still available. I thought it might be a fun project to sand down and try to repaint and see what I could do with it.

Still too much for the condition. That thing is ROUGH. Go see if the guy in Chilli will come down some, that looks pretty nice, but the large gap on the right hand side makes me wonder if it is tweaked. I've come to realize, drop front boxes are actually pretty fragile. And once they get out of square it is a royal pain to get them back. The first one you posted is pretty much done. I can all but guarantee the rust has penetrated the seams.

 

[firworks]

Still has the auction tag on it.



Still too much for the condition. That thing is ROUGH. Go see if the guy in Chilli will come down some, that looks pretty nice, but the large gap on the right hand side makes me wonder if it is tweaked. I've come to realize, drop front boxes are actually pretty fragile. And once they get out of square it is a royal pain to get them back. The first one you posted is pretty much done. I can all but guarantee the rust has penetrated the seams.

Dang... that's troubling. I was hoping to nab it as a fun rehab project. I really don't need another top box since I just got that SK. Maybe he'll get real offended by my low offer and he'll relist it at like 500$ and I won't have to worry about going back on my offer. People down here get offended if you try to deal at all.

I might still nab it if I get there and it doesn't look TOO bad. I could probably flip it at a tool auction worst case as it is Snap-On and Snap-On stuff sells for over retail insanely here. About a month ago at Schmidgall I watched this Snap-On set:
http://www.ebay.com/itm/SNAP-ON-11-PIECE-PUNCH-AND-CHISEL-SET-/252018131167

get split up, so they auctioned the punches and chisels separately. The punches went for 130$ and the chisels went for 90$. These were very used, with no sleeve. Nice thing is though none of the locals here know Wright, Armstrong, SK, or any of the other industrial brands. I snatched like 12 high quality ratchets for 30$ total after the single 3/8" Snap-On in the lot went for 60$.

 

[macgee]

2-Nu-Era Tool Box / Storage Cabinets by Rack Engineering - $165 (Lakewood CA)

I'm going to regret this but I just bought one and too lazy to make the drive:

These are similar to Lyon, Lista and Vidmars. I would much prefer these to the Snap-On boxes above.

7 Drawers with ball bearing gliders. Comes with adjustable drawer dividers for parts. Heavy
Duty casters. 165.00 each or both for $300.00. Priced to sell.


http://losangeles.craigslist.org/lgb/tls/5125355549.html

 

[rice rocket]

Those casters look small for what (I think) I would put in it. That's a pretty easy fix though.

 

[bubinga]

2-Nu-Era Tool Box / Storage Cabinets by Rack Engineering - $165 (Lakewood CA)

I'm going to regret this but I just bought one and too lazy to make the drive:

These are similar to Lyon, Lista and Vidmars. I would much prefer these to the Snap-On boxes above.

7 Drawers with ball bearing gliders. Comes with adjustable drawer dividers for parts. Heavy
Duty casters. 165.00 each or both for $300.00. Priced to sell.


http://losangeles.craigslist.org/lgb/tls/5125355549.html

Those casters look small for what (I think) I would put in it. That's a pretty easy fix though.

yeah, but those are nice, l would not mind having one.(or two)

 

[Mohawk Dave]

Thanks macgee...I'm on my way to pick up.

 

[bubinga]

Thanks macgee...I'm on my way to pick up.

drop one off out my way...............LOL

 

[macgee]

Thanks macgee...I'm on my way to pick up.

I have deep remorse, today I was in the shop and realized I could really have used one of them.

 

[rice rocket]

Finder's fee.

 

[macgee]

Yup, Seller confirmed Dave picked them up today and no longer available. I'm glad I could help.

The remorse is still stinging.