Hutchman
Member
Well, I'm already down to six for the shop. My wife has requisitioned two for the attached garage. Bummer!
Hutch
Hutch

I ran down to my local Lowe's after calling the dept where they're kept - **SNIP**
Rule #1 of clearance/closeout deals like this: DO NOT call the store to ask if they're in stock, or to ask them to put them on hold for you. They will see that they have them in stock and buy them for themselves, or alert one of their friends/relatives about the deal and you lose out before you can get there to pick them up.
The only way to find out for sure is to drive to the store and search around. Do NOT trust the inventory computer, they are almost always wrong (if they say they have 6 in stock, they will either have -0- or 27 of them). If you don't see them out on the floor, ask someone to check in back or in the backstock area for you- especially for a larger item like these cabinets.


I picked up a few more this afternoon...Huntsville, AL is now out of them!
I've a friend who's an Operations Manager here in town & he told me he'd notify when the bases went on clearance....I'll let you guys know if someone else doesn't find out first.
$10 for 4', so it basically takes two rails long to mount three cabinets side by side. Then there is a bracket (rather strong steel bracket) that mounts to the back of the cabinet that drops into the rail. Gladiator recommends a rail at the top and a rail at the bottom all for the fact that the bottom rail will space the cabinet out evenly, but it is not used to mount to. Only spacing. So I picked up an 8' piece of prefinished MDF to use as the bottom spacer. I'll see how this all works out today as I am going to mount some of the cabinets.

